# How to connect Getprospect to Hermes Agent (paste one key, 22 tools) > Connect Getprospect to Hermes with ClawLink: paste your Getprospect key once and 22 tools work from chat. No MCP server to run, nothing stored on your machine. Web version: https://claw-link.dev/hermes/getprospect Most guides for giving Hermes Agent Getprospect access start with registering your own OAuth app or pasting API keys into env files, then leave the token refresh and tool wiring to you. ClawLink gives Hermes a more practical Getprospect setup: pair once in the browser and your always-on Hermes agent can act on Getprospect for you, reading and doing real work on your behalf with no auth, token refresh, or tool wiring to build yourself. ## Setup It takes three steps to connect Hermes to Getprospect. 1. **Install ClawLink** — add the plugin to Hermes Agent once. 2. **Connect Getprospect** — one-click OAuth in the ClawLink dashboard. 3. **Use it from chat** — ask Hermes Agent in plain English. **Paste this into Hermes to set up ClawLink:** > Set up ClawLink for Hermes and tell me when it's ready. > 1. Install the plugin: `hermes plugins install ClawLink-HQ/hermes-plugin --enable` > 2. Start pairing with `hermes clawlink begin`. It prints an approval link, so show me the link and stop, don't wait. > 3. I'll approve it in my browser, then reply "approved". > 4. When I say approved, finish setup: `hermes clawlink finish` > 5. Then run `hermes clawlink test` and tell me whether ClawLink is ready. **Alternative for any agent (no plugin needed):** if the Hermes Agent plugin route isn't available or doesn't work, any AI agent with shell access can use the ClawLink CLI instead: ```bash npx -y @useclawlink/cli login # sign in via browser — no API key to paste npx -y @useclawlink/cli connect getprospect # connect Getprospect (browser OAuth) npx -y @useclawlink/cli actions getprospect # list available actions npx -y @useclawlink/cli run getprospect --input '' # execute (add --confirm for writes) ``` ### Install by command The prompt above walks Hermes through this. By hand, it is four commands and a browser approval: ```bash hermes plugins install ClawLink-HQ/hermes-plugin --enable hermes clawlink begin # prints an approval link — open it and approve hermes clawlink finish # after approving in the browser hermes clawlink test ``` Then connect Getprospect in the [ClawLink dashboard](https://claw-link.dev/dashboard) — paste your Getprospect API key once. Verify the connection by asking Hermes: > Create it in Getprospect for me, then confirm the important fields before you finish. ### Using a different agent? The Hermes plugin is one client of ClawLink's MCP server. Claude Code, Cursor, Codex, or any agent that can run a shell command pairs with the same ClawLink account through the CLI: ```bash npx -y @useclawlink/cli login ``` `login` opens the same browser approval and stores a credential locally. Once Getprospect is connected in the dashboard, that agent calls the same 22 Getprospect tools over MCP. Full setup for MCP clients and shell agents: [connect apps to any AI agent](https://claw-link.dev/learn/connect-apps-to-any-ai-agent). ## Getprospect MCP for Hermes Looking for a Getprospect MCP server for Hermes Agent? ClawLink connects Getprospect to Hermes Agent and exposes 22 Getprospect tools your agent can call over [MCP](https://claw-link.dev/learn/what-is-an-mcp-server), with [hosted auth](https://claw-link.dev/learn/oauth-for-ai-agents) and nothing to run or maintain yourself. Using OpenClaw instead? The [OpenClaw Getprospect integration](https://claw-link.dev/openclaw/getprospect) works the same way. ## What the Hermes Agent Getprospect integration can do 22 Getprospect tools are ready for Hermes Agent once the account is connected. The 19 below are the ones people reach for most; your agent can call all 22. ### 19 of 22 Getprospect tools for Hermes | Tool | What it does | |---|---| | **Create export** `getprospect_create_export` | Create a new export job | | **Get account workspace limits** `getprospect_get_account_workspace_limits` | Retrieve workspace limits for the user's account | | **Get all companies** `getprospect_get_all_companies` | Retrieve all companies | | **Get all lists** `getprospect_get_all_lists` | Retrieve all prospect contact lists | | **Get single company** `getprospect_get_single_company` | Retrieve details of a single company by its ID | | **Get single contact** `getprospect_get_single_contact` | Retrieve details of a single contact | | **Search companies** `getprospect_search_companies` | Search for companies by name | | **Search contacts** `getprospect_search_contacts` | Search for contacts by filters | | **Search contacts related to list** `getprospect_search_contacts_related_to_list` | Search contacts in a specific list | | **Search through lists by name** `getprospect_search_through_lists_by_name` | Search contact lists by name | | **Verify email address** `getprospect_verify_email_address` | Verify an email's deliverability | | **Apply coupon code** `getprospect_apply_coupon_code` | Apply a coupon code to the user's account | | **Create company** `getprospect_create_company` | Create a new company | | **Create contact** `getprospect_create_contact` | Create a new contact | | **Create list** `getprospect_create_list` | Create a new contact list | | **Post add contacts to list** `getprospect_post_add_contacts_to_list` | Add contacts to a specified list | | **Update company** `getprospect_update_company` | Update details of an existing company | | **Update contact** `getprospect_update_contact` | Update details of an existing contact | | **Update list** `getprospect_update_list` | Update a contact list's name | ## Example prompts **Create Export** > Create it in Getprospect for me, then confirm the important fields before you finish. **Get Account Workspace Limits** > Pull the relevant data from Getprospect, summarize it in plain English, and point out anything that needs attention. **Get All Companies** > Pull the relevant data from Getprospect, summarize it in plain English, and point out anything that needs attention. **Get All Lists** > Pull the relevant data from Getprospect, summarize it in plain English, and point out anything that needs attention. ## ClawLink vs. building it yourself The alternative to ClawLink is usually manual API key setup plus your own token handling, permission troubleshooting, and tool plumbing for Hermes Agent. That is fine if you want to build and maintain the integration yourself. Most teams just want Getprospect working from chat. | | Manual | ClawLink | |---|---|---| | **Credential handling** | Collect, validate, store, and rotate the Getprospect API key yourself, then make sure every tool call uses the right account. | Users complete the hosted ClawLink setup once and the connected Getprospect account becomes available to the agent without you building credential management. | | **Ongoing maintenance** | You own refresh logic, permission debugging, environment config, and every provider-specific edge case for Getprospect. | ClawLink handles the repetitive integration plumbing so your team can focus on the workflow instead of the infrastructure. | | **Agent usability** | You still need to expose the right Getprospect actions to the runtime in a format your agent can reliably use. | 22 tools for Getprospect are already exposed through ClawLink, so the agent can read and act from chat immediately. | ## ClawLink vs. Composio Composio also exposes Getprospect to AI agents. It is developer infrastructure: Python and TypeScript SDKs, an MCP server, and a catalog past 1,000 apps, aimed at teams shipping agent products. ClawLink is built for Hermes Agent users instead. You install the plugin once, connect Getprospect in the browser, and the 22 tools above work from chat. There is no SDK and no config file, and the Getprospect key you paste at setup is stored server-side rather than kept in your environment. Choosing between them? Read the full [Composio alternatives](https://claw-link.dev/hub/composio-alternatives) comparison. ### Hermes paired but still can't use Getprospect Pairing is a two-step handshake: run `hermes clawlink begin`, approve the link in your browser, then run `hermes clawlink finish`. If you ran finish before approving, or the approval link expired, run `hermes clawlink begin` again to get a fresh link. Confirm the plugin was installed with `--enable`, then verify with `hermes clawlink test`. ### Connection succeeds but no tools appear Reconnect Getprospect from the dashboard, then start a fresh chat if the runtime still has the old tool catalog loaded. ### "Tool schema not loaded yet" error when calling Getprospect tools Getprospect tool schemas load on demand the first time a tool runs and are cached after that, so this error usually clears on its own: wait a few seconds and retry the same request. If every Getprospect call keeps failing with it in a fresh chat, reconnect from the dashboard, and contact support if it still persists — that pattern points to a configuration problem on our side, not something you can fix by reconnecting again. ### Getprospect returns 403 or "permission denied" on one action while others work Two usual causes. The connected account may not have access to the specific workspace, inbox, store, or project in the request — check that first. If access looks right, the agent may have sent a placeholder value (like "YOUR_ID" or an example id from documentation) instead of a real one: ask it to run a list or search tool first, then retry the action with a real id from those results. Most failures at this stage are one of these two, not ClawLink bugs. ### API key setup works but results look incomplete Double-check that the API key for Getprospect has the right scopes or account access. A valid key can still be too limited for some reads or writes. ### Is there a Hermes Agent Getprospect integration? Yes. ClawLink is the fastest way to connect Hermes to Getprospect: link your Getprospect account once in the browser and Hermes Agent can call the Getprospect API through 22 ready-made tools — no custom code or token handling. ### How do I connect Getprospect to Hermes with ClawLink? Install the plugin with `hermes plugins install ClawLink-HQ/hermes-plugin --enable`, then pair once: run `hermes clawlink begin`, approve the link in your browser, and run `hermes clawlink finish`. Connect Getprospect in the dashboard and Hermes can use it from the next message — no config files, and the Getprospect key you paste is stored server-side instead of in your environment. ### How long does it take to connect Getprospect to Hermes Agent? About two minutes. Sign in, click Connect next to Getprospect in the dashboard, authenticate, and Hermes Agent can use it from the next chat message. ### Why use ClawLink instead of wiring Getprospect up myself? The alternative to ClawLink is usually manual API key setup plus your own token handling, permission troubleshooting, and tool plumbing for Hermes Agent. That is fine if you want to build and maintain the integration yourself. Most teams just want Getprospect working from chat. ### Hermes paired but still can't use Getprospect Pairing is a two-step handshake: run `hermes clawlink begin`, approve the link in your browser, then run `hermes clawlink finish`. If you ran finish before approving, or the approval link expired, run `hermes clawlink begin` again to get a fresh link. Confirm the plugin was installed with `--enable`, then verify with `hermes clawlink test`. ## Related - [Hermes ActiveCampaign integration](https://claw-link.dev/hermes/activecampaign) — Marketing automation, CRM, and email marketing - [Benchmark Email](https://claw-link.dev/hermes/benchmark-email) — Benchmark Email is a comprehensive email marketing platform offering tools for creating, sending, and analyzing email campaigns. - [Mailchimp tools](https://claw-link.dev/hermes/mailchimp) — Create email campaigns and manage audiences