How to connect Authyo to OpenClaw
Connect Authyo to OpenClaw with ClawLink: paste your Authyo key once and 5 tools work from chat. No MCP server to run, nothing stored on your machine.
AuthyoAPI KEYMCPAuthyo provides passwordless authentication, OTP verification, session management, and transactional notifications through its REST API.. Once connected, OpenClaw can read and act on Authyo from chat — pairing, token refresh, and tool wiring handled for you.
The usual route to Authyo access for OpenClaw is an MCP server you configure and keep running, plus your own OAuth app or API keys. ClawLink gives OpenClaw a more practical Authyo setup: install one ClawHub skill, connect Authyo in the browser, and OpenClaw can call real Authyo actions from any chat surface with no auth, token refresh, or tool wiring to build yourself.
Setup
It takes three steps to connect OpenClaw to Authyo.
1Install the plugin
Paste the setup prompt into OpenClaw, or install from the terminal and ask OpenClaw to pair:
openclaw plugins install clawhub:clawlink-plugin- 2
Connect Authyo
Paste your API key in the dashboard.
- 3
Use it from chat
Ask OpenClaw: "What can you do with Authyo?"
Install by command
The setup prompt above does all of this in one paste. By hand, it is one install command plus a browser approval:
openclaw plugins install clawhub:clawlink-pluginThen ask OpenClaw to set up ClawLink. It starts browser pairing and prints an approval link — open it, approve the device, return to the chat, and say done. Finally, connect Authyo in the ClawLink dashboard — paste your Authyo API key once.
Verify the connection by asking OpenClaw:
Use Authyo to verify token and walk me through the result in plain English.
Using a different agent?
The OpenClaw plugin is one client of ClawLink's MCP server. Claude Code, Cursor, Codex, or any agent that can run a shell command pairs with the same ClawLink account through the CLI:
npx -y @useclawlink/cli loginlogin opens the same browser approval and stores a credential locally. Once Authyo is connected in the dashboard, that agent calls the same 5 Authyo tools over MCP. Full setup for MCP clients and shell agents: connect apps to any AI agent.
Authyo MCP for OpenClaw
Looking for a Authyo MCP server for OpenClaw? ClawLink connects Authyo to OpenClaw and exposes 5 Authyo tools your agent can call over MCP, with hosted auth and nothing to run or maintain yourself. Using Hermes instead? The Hermes Authyo integration works the same way.
What the OpenClaw Authyo integration can do
5 Authyo tools are ready for OpenClaw once the account is connected.
All 5 Authyo tools for OpenClaw
| Tool | What it does |
|---|---|
Verify token authyo_verify_token | Validate an Authyo session JWT and return its associated user identity without returning the JWT |
Verify otp authyo_verify_otp | Verify a user-provided OTP for an Authyo mask ID and return the verified user identity without |
Revoke session authyo_revoke_session | Irreversibly revoke an Authyo user session identified by its JWT, typically during logout |
Send order notification authyo_send_order_notification | Send a usage-billed order or payment notification through an Authyo built-in template; requires |
Send otp authyo_send_otp | Send a usage-billed one-time password to an email address or international phone number using |
Try it: find the Authyo tool you need
Browse the 5 Authyo tools
Click any tool to see exactly what OpenClaw can do and copy a ready-to-use prompt.
Example prompts
Use Authyo to verify token and walk me through the result in plain English.
Use Authyo to verify otp and walk me through the result in plain English.
Use Authyo to revoke session and walk me through the result in plain English.
Use Authyo to send order notification for me and draft the message before sending.
ClawLink vs. building it yourself
The alternative to ClawLink is usually manual API key setup plus your own token handling, permission troubleshooting, and tool plumbing for OpenClaw. That is fine if you want to build and maintain the integration yourself. Most teams just want Authyo working from chat.
| Manual | ClawLink | |
|---|---|---|
| Credential handling | Collect, validate, store, and rotate the Authyo API key yourself, then make sure every tool call uses the right account. | Users complete the hosted ClawLink setup once and the connected Authyo account becomes available to the agent without you building credential management. |
| Ongoing maintenance | You own refresh logic, permission debugging, environment config, and every provider-specific edge case for Authyo. | ClawLink handles the repetitive integration plumbing so your team can focus on the workflow instead of the infrastructure. |
| Agent usability | You still need to expose the right Authyo actions to the runtime in a format your agent can reliably use. | 5 tools for Authyo are already exposed through ClawLink, so the agent can read and act from chat immediately. |
ClawLink vs. Composio
Composio also exposes Authyo to AI agents. It is developer infrastructure: Python and TypeScript SDKs, an MCP server, and a catalog past 1,000 apps, aimed at teams shipping agent products. ClawLink is built for OpenClaw users instead. You install the plugin once, connect Authyo in the browser, and the 5 tools above work from chat. There is no SDK and no config file, and the Authyo key you paste at setup is stored server-side rather than kept in your environment. Choosing between them? Read the full Composio alternatives comparison.
Troubleshooting
OpenClaw installed the Authyo skill but can't call the tools
The ClawHub skill teaches OpenClaw about Authyo, but the calls run through the ClawLink plugin and your connected account. Make sure Authyo is connected in the dashboard, then start a fresh chat so OpenClaw reloads the tool catalog. If OpenClaw runs as a persistent gateway, restart it so the new tools register.
Connection succeeds but no tools appear
Reconnect Authyo from the dashboard, then start a fresh chat if the runtime still has the old tool catalog loaded.
"Tool schema not loaded yet" error when calling Authyo tools
Authyo tool schemas load on demand the first time a tool runs and are cached after that, so this error usually clears on its own: wait a few seconds and retry the same request. If every Authyo call keeps failing with it in a fresh chat, reconnect from the dashboard, and contact support if it still persists — that pattern points to a configuration problem on our side, not something you can fix by reconnecting again.
Authyo returns 403 or "permission denied" on one action while others work
Two usual causes. The connected account may not have access to the specific workspace, inbox, store, or project in the request — check that first. If access looks right, the agent may have sent a placeholder value (like "YOUR_ID" or an example id from documentation) instead of a real one: ask it to run a list or search tool first, then retry the action with a real id from those results. Most failures at this stage are one of these two, not ClawLink bugs.
API key setup works but results look incomplete
Double-check that the API key for Authyo has the right scopes or account access. A valid key can still be too limited for some reads or writes.
FAQ
Is there a OpenClaw Authyo integration?
Yes. ClawLink is the fastest way to connect OpenClaw to Authyo: link your Authyo account once in the browser and OpenClaw can call the Authyo API through 5 ready-made tools — no custom code or token handling.
How do I add Authyo to OpenClaw with ClawLink?
Paste the setup prompt from this page into OpenClaw. It installs the ClawLink Authyo skill from ClawHub, then you click Connect in the dashboard to authorize Authyo. OpenClaw calls the tools from the next message — no config files, and the Authyo key you paste is stored server-side instead of in your environment.
How long does it take to connect Authyo to OpenClaw?
About two minutes. Sign in, click Connect next to Authyo in the dashboard, authenticate, and OpenClaw can use it from the next chat message.
Why use ClawLink instead of wiring Authyo up myself?
The alternative to ClawLink is usually manual API key setup plus your own token handling, permission troubleshooting, and tool plumbing for OpenClaw. That is fine if you want to build and maintain the integration yourself. Most teams just want Authyo working from chat.
OpenClaw installed the Authyo skill but can't call the tools
The ClawHub skill teaches OpenClaw about Authyo, but the calls run through the ClawLink plugin and your connected account. Make sure Authyo is connected in the dashboard, then start a fresh chat so OpenClaw reloads the tool catalog. If OpenClaw runs as a persistent gateway, restart it so the new tools register.
