How to connect Dropcontact to OpenClaw
Connect Dropcontact to OpenClaw with ClawLink: paste your Dropcontact key once and 7 tools work from chat. No MCP server to run, nothing stored on your machine.
DropcontactAPI KEYMCPDropcontact is a B2B email finder and data enrichment service that provides verified professional email addresses and enriches contact information.. Once connected, OpenClaw can read and act on Dropcontact from chat — pairing, token refresh, and tool wiring handled for you.
The usual route to Dropcontact access for OpenClaw is an MCP server you configure and keep running, plus your own OAuth app or API keys. ClawLink gives OpenClaw a more practical Dropcontact setup: install one ClawHub skill, connect Dropcontact in the browser, and OpenClaw can call real Dropcontact actions from any chat surface with no auth, token refresh, or tool wiring to build yourself.
Setup
It takes three steps to connect OpenClaw to Dropcontact.
1Install the plugin
Paste the setup prompt into OpenClaw, or install from the terminal and ask OpenClaw to pair:
openclaw plugins install clawhub:clawlink-plugin- 2
Connect Dropcontact
Paste your API key in the dashboard.
- 3
Use it from chat
Ask OpenClaw: "What can you do with Dropcontact?"
Install by command
The setup prompt above does all of this in one paste. By hand, it is one install command plus a browser approval:
openclaw plugins install clawhub:clawlink-pluginThen ask OpenClaw to set up ClawLink. It starts browser pairing and prints an approval link — open it, approve the device, return to the chat, and say done. Finally, connect Dropcontact in the ClawLink dashboard — paste your Dropcontact API key once.
Verify the connection by asking OpenClaw:
List the relevant items in Dropcontact, group them by priority, and recommend what OpenClaw should do next.
Using a different agent?
The OpenClaw plugin is one client of ClawLink's MCP server. Claude Code, Cursor, Codex, or any agent that can run a shell command pairs with the same ClawLink account through the CLI:
npx -y @useclawlink/cli loginlogin opens the same browser approval and stores a credential locally. Once Dropcontact is connected in the dashboard, that agent calls the same 7 Dropcontact tools over MCP. Full setup for MCP clients and shell agents: connect apps to any AI agent.
Dropcontact MCP for OpenClaw
Looking for a Dropcontact MCP server for OpenClaw? ClawLink connects Dropcontact to OpenClaw and exposes 7 Dropcontact tools your agent can call over MCP, with hosted auth and nothing to run or maintain yourself. Using Hermes instead? The Hermes Dropcontact integration works the same way.
What the OpenClaw Dropcontact integration can do
7 Dropcontact tools are ready for OpenClaw once the account is connected. The 6 below are the ones people reach for most; your agent can call all 7.
6 of 7 Dropcontact tools for OpenClaw
| Tool | What it does |
|---|---|
List webhook subscriptions dropcontact_list_webhook_subscriptions | List webhook subscriptions |
List webhook subscriptions v2 dropcontact_list_webhook_subscriptions_v2 | List all webhook subscriptions configured for the account |
Retrieve enrichment results dropcontact_retrieve_enrichment_results | Retrieves enriched contact data by request ID after submitting contacts for enrichment |
Create webhook subscription dropcontact_create_webhook_subscription | Create a new webhook subscription for receiving automatic notifications when enrichment results |
Enrich contacts dropcontact_enrich_contacts | Initiates asynchronous batch enrichment for up to 250 contacts with email finding, validation |
Update webhook subscription dropcontact_update_webhook_subscription | Update an existing webhook subscription |
Try it: find the Dropcontact tool you need
Browse the 6 Dropcontact tools
Click any tool to see exactly what OpenClaw can do and copy a ready-to-use prompt.
Example prompts
List the relevant items in Dropcontact, group them by priority, and recommend what OpenClaw should do next.
List the relevant items in Dropcontact, group them by priority, and recommend what OpenClaw should do next.
Pull the relevant data from Dropcontact, summarize it in plain English, and point out anything that needs attention.
Create it in Dropcontact for me, then confirm the important fields before you finish.
ClawLink vs. building it yourself
The alternative to ClawLink is usually manual API key setup plus your own token handling, permission troubleshooting, and tool plumbing for OpenClaw. That is fine if you want to build and maintain the integration yourself. Most teams just want Dropcontact working from chat.
| Manual | ClawLink | |
|---|---|---|
| Credential handling | Collect, validate, store, and rotate the Dropcontact API key yourself, then make sure every tool call uses the right account. | Users complete the hosted ClawLink setup once and the connected Dropcontact account becomes available to the agent without you building credential management. |
| Ongoing maintenance | You own refresh logic, permission debugging, environment config, and every provider-specific edge case for Dropcontact. | ClawLink handles the repetitive integration plumbing so your team can focus on the workflow instead of the infrastructure. |
| Agent usability | You still need to expose the right Dropcontact actions to the runtime in a format your agent can reliably use. | 7 tools for Dropcontact are already exposed through ClawLink, so the agent can read and act from chat immediately. |
ClawLink vs. Composio
Composio also exposes Dropcontact to AI agents. It is developer infrastructure: Python and TypeScript SDKs, an MCP server, and a catalog past 1,000 apps, aimed at teams shipping agent products. ClawLink is built for OpenClaw users instead. You install the plugin once, connect Dropcontact in the browser, and the 7 tools above work from chat. There is no SDK and no config file, and the Dropcontact key you paste at setup is stored server-side rather than kept in your environment. Choosing between them? Read the full Composio alternatives comparison.
Troubleshooting
OpenClaw installed the Dropcontact skill but can't call the tools
The ClawHub skill teaches OpenClaw about Dropcontact, but the calls run through the ClawLink plugin and your connected account. Make sure Dropcontact is connected in the dashboard, then start a fresh chat so OpenClaw reloads the tool catalog. If OpenClaw runs as a persistent gateway, restart it so the new tools register.
Connection succeeds but no tools appear
Reconnect Dropcontact from the dashboard, then start a fresh chat if the runtime still has the old tool catalog loaded.
"Tool schema not loaded yet" error when calling Dropcontact tools
Dropcontact tool schemas load on demand the first time a tool runs and are cached after that, so this error usually clears on its own: wait a few seconds and retry the same request. If every Dropcontact call keeps failing with it in a fresh chat, reconnect from the dashboard, and contact support if it still persists — that pattern points to a configuration problem on our side, not something you can fix by reconnecting again.
Dropcontact returns 403 or "permission denied" on one action while others work
Two usual causes. The connected account may not have access to the specific workspace, inbox, store, or project in the request — check that first. If access looks right, the agent may have sent a placeholder value (like "YOUR_ID" or an example id from documentation) instead of a real one: ask it to run a list or search tool first, then retry the action with a real id from those results. Most failures at this stage are one of these two, not ClawLink bugs.
API key setup works but results look incomplete
Double-check that the API key for Dropcontact has the right scopes or account access. A valid key can still be too limited for some reads or writes.
FAQ
Is there a OpenClaw Dropcontact integration?
Yes. ClawLink is the fastest way to connect OpenClaw to Dropcontact: link your Dropcontact account once in the browser and OpenClaw can call the Dropcontact API through 7 ready-made tools — no custom code or token handling.
How do I add Dropcontact to OpenClaw with ClawLink?
Paste the setup prompt from this page into OpenClaw. It installs the ClawLink Dropcontact skill from ClawHub, then you click Connect in the dashboard to authorize Dropcontact. OpenClaw calls the tools from the next message — no config files, and the Dropcontact key you paste is stored server-side instead of in your environment.
How long does it take to connect Dropcontact to OpenClaw?
About two minutes. Sign in, click Connect next to Dropcontact in the dashboard, authenticate, and OpenClaw can use it from the next chat message.
Why use ClawLink instead of wiring Dropcontact up myself?
The alternative to ClawLink is usually manual API key setup plus your own token handling, permission troubleshooting, and tool plumbing for OpenClaw. That is fine if you want to build and maintain the integration yourself. Most teams just want Dropcontact working from chat.
OpenClaw installed the Dropcontact skill but can't call the tools
The ClawHub skill teaches OpenClaw about Dropcontact, but the calls run through the ClawLink plugin and your connected account. Make sure Dropcontact is connected in the dashboard, then start a fresh chat so OpenClaw reloads the tool catalog. If OpenClaw runs as a persistent gateway, restart it so the new tools register.
