How to connect ImageKit to OpenClaw
Connect ImageKit to OpenClaw with ClawLink: paste your ImageKit key once and 26 tools work from chat. No MCP server to run, nothing stored on your machine.
ImageKitAPI KEYMCPImageKit.io is a comprehensive media management solution offering real-time image and video optimization, transformation, and delivery through a global content delivery network (CDN).. Once connected, OpenClaw can read and act on ImageKit from chat — pairing, token refresh, and tool wiring handled for you.
The usual route to ImageKit access for OpenClaw is an MCP server you configure and keep running, plus your own OAuth app or API keys. ClawLink gives OpenClaw a more practical ImageKit setup: install one ClawHub skill, connect ImageKit in the browser, and OpenClaw can call real ImageKit actions from any chat surface with no auth, token refresh, or tool wiring to build yourself.
Setup
It takes three steps to connect OpenClaw to ImageKit.
1Install the plugin
Paste the setup prompt into OpenClaw, or install from the terminal and ask OpenClaw to pair:
openclaw plugins install clawhub:clawlink-plugin- 2
Connect ImageKit
Paste your API key in the dashboard.
- 3
Use it from chat
Ask OpenClaw: "What can you do with ImageKit?"
Install by command
The setup prompt above does all of this in one paste. By hand, it is one install command plus a browser approval:
openclaw plugins install clawhub:clawlink-pluginThen ask OpenClaw to set up ClawLink. It starts browser pairing and prints an approval link — open it, approve the device, return to the chat, and say done. Finally, connect ImageKit in the ClawLink dashboard — paste your ImageKit API key once.
Verify the connection by asking OpenClaw:
Use ImageKit to bulk job status and walk me through the result in plain English.
Using a different agent?
The OpenClaw plugin is one client of ClawLink's MCP server. Claude Code, Cursor, Codex, or any agent that can run a shell command pairs with the same ClawLink account through the CLI:
npx -y @useclawlink/cli loginlogin opens the same browser approval and stores a credential locally. Once ImageKit is connected in the dashboard, that agent calls the same 26 ImageKit tools over MCP. Full setup for MCP clients and shell agents: connect apps to any AI agent.
ImageKit MCP for OpenClaw
Looking for a ImageKit MCP server for OpenClaw? ClawLink connects ImageKit to OpenClaw and exposes 26 ImageKit tools your agent can call over MCP, with hosted auth and nothing to run or maintain yourself. Using Hermes instead? The Hermes ImageKit integration works the same way.
What the OpenClaw ImageKit integration can do
26 ImageKit tools are ready for OpenClaw once the account is connected. The 19 below are the ones people reach for most; your agent can call all 26.
19 of 26 ImageKit tools for OpenClaw
| Tool | What it does |
|---|---|
Bulk job status imagekit_io_bulk_job_status | Retrieve the status of a bulk folder operation |
Get authentication parameters imagekit_io_get_authentication_parameters | Generate authentication parameters for client-side file uploads |
Get file details imagekit_io_get_file_details | Retrieve details of a specific file |
Get file metadata imagekit_io_get_file_metadata | Retrieve metadata of an uploaded file |
Get file version details imagekit_io_get_file_version_details | Retrieve details of a specific file version |
Get usage imagekit_io_get_usage | Retrieve ImageKit account usage metrics for a specified date range |
List and search assets imagekit_io_list_and_search_assets | List and search media assets (files, folders, file-versions) in your ImageKit media library |
List custom metadata fields imagekit_io_list_custom_metadata_fields | List all custom metadata fields defined in the ImageKit Media Library |
List file versions imagekit_io_list_file_versions | Retrieves all versions of a specific file in ImageKit |
Bulk move files imagekit_io_bulk_move_files | Move multiple files in bulk |
Bulk remove tags imagekit_io_bulk_remove_tags | Remove tags from multiple files in bulk |
Copy folder imagekit_io_copy_folder | Initiate an asynchronous bulk copy of a folder and all its contents to a new location |
Create custom metadata field imagekit_io_create_custom_metadata_field | Create a new custom metadata field in ImageKit DAM |
Create folder imagekit_io_create_folder | Creates a new folder in ImageKit.io media library |
Move folder imagekit_io_move_folder | Move a folder from one location to another in your ImageKit media library |
Rename file imagekit_io_rename_file | Renames an existing file in the ImageKit media library |
Restore file version imagekit_io_restore_file_version | Restores a non-current file version to become the current version in ImageKit |
Update custom metadata field imagekit_io_update_custom_metadata_field | Updates an existing custom metadata field's label or schema constraints in ImageKit DAM |
Update file details imagekit_io_update_file_details | Update file details in ImageKit media library |
Try it: find the ImageKit tool you need
Browse the 19 ImageKit tools
Click any tool to see exactly what OpenClaw can do and copy a ready-to-use prompt.
Example prompts
Use ImageKit to bulk job status and walk me through the result in plain English.
Pull the relevant data from ImageKit, summarize it in plain English, and point out anything that needs attention.
Pull the relevant data from ImageKit, summarize it in plain English, and point out anything that needs attention.
Pull the relevant data from ImageKit, summarize it in plain English, and point out anything that needs attention.
ClawLink vs. building it yourself
The alternative to ClawLink is usually manual API key setup plus your own token handling, permission troubleshooting, and tool plumbing for OpenClaw. That is fine if you want to build and maintain the integration yourself. Most teams just want ImageKit working from chat.
| Manual | ClawLink | |
|---|---|---|
| Credential handling | Collect, validate, store, and rotate the ImageKit API key yourself, then make sure every tool call uses the right account. | Users complete the hosted ClawLink setup once and the connected ImageKit account becomes available to the agent without you building credential management. |
| Ongoing maintenance | You own refresh logic, permission debugging, environment config, and every provider-specific edge case for ImageKit. | ClawLink handles the repetitive integration plumbing so your team can focus on the workflow instead of the infrastructure. |
| Agent usability | You still need to expose the right ImageKit actions to the runtime in a format your agent can reliably use. | 26 tools for ImageKit are already exposed through ClawLink, so the agent can read and act from chat immediately. |
ClawLink vs. Composio
Composio also exposes ImageKit to AI agents. It is developer infrastructure: Python and TypeScript SDKs, an MCP server, and a catalog past 1,000 apps, aimed at teams shipping agent products. ClawLink is built for OpenClaw users instead. You install the plugin once, connect ImageKit in the browser, and the 26 tools above work from chat. There is no SDK and no config file, and the ImageKit key you paste at setup is stored server-side rather than kept in your environment. Choosing between them? Read the full Composio alternatives comparison.
Troubleshooting
OpenClaw installed the ImageKit skill but can't call the tools
The ClawHub skill teaches OpenClaw about ImageKit, but the calls run through the ClawLink plugin and your connected account. Make sure ImageKit is connected in the dashboard, then start a fresh chat so OpenClaw reloads the tool catalog. If OpenClaw runs as a persistent gateway, restart it so the new tools register.
Connection succeeds but no tools appear
Reconnect ImageKit from the dashboard, then start a fresh chat if the runtime still has the old tool catalog loaded.
"Tool schema not loaded yet" error when calling ImageKit tools
ImageKit tool schemas load on demand the first time a tool runs and are cached after that, so this error usually clears on its own: wait a few seconds and retry the same request. If every ImageKit call keeps failing with it in a fresh chat, reconnect from the dashboard, and contact support if it still persists — that pattern points to a configuration problem on our side, not something you can fix by reconnecting again.
ImageKit returns 403 or "permission denied" on one action while others work
Two usual causes. The connected account may not have access to the specific workspace, inbox, store, or project in the request — check that first. If access looks right, the agent may have sent a placeholder value (like "YOUR_ID" or an example id from documentation) instead of a real one: ask it to run a list or search tool first, then retry the action with a real id from those results. Most failures at this stage are one of these two, not ClawLink bugs.
API key setup works but results look incomplete
Double-check that the API key for ImageKit has the right scopes or account access. A valid key can still be too limited for some reads or writes.
FAQ
Is there a OpenClaw ImageKit integration?
Yes. ClawLink is the fastest way to connect OpenClaw to ImageKit: link your ImageKit account once in the browser and OpenClaw can call the ImageKit API through 26 ready-made tools — no custom code or token handling.
How do I add ImageKit to OpenClaw with ClawLink?
Paste the setup prompt from this page into OpenClaw. It installs the ClawLink ImageKit skill from ClawHub, then you click Connect in the dashboard to authorize ImageKit. OpenClaw calls the tools from the next message — no config files, and the ImageKit key you paste is stored server-side instead of in your environment.
How long does it take to connect ImageKit to OpenClaw?
About two minutes. Sign in, click Connect next to ImageKit in the dashboard, authenticate, and OpenClaw can use it from the next chat message.
Why use ClawLink instead of wiring ImageKit up myself?
The alternative to ClawLink is usually manual API key setup plus your own token handling, permission troubleshooting, and tool plumbing for OpenClaw. That is fine if you want to build and maintain the integration yourself. Most teams just want ImageKit working from chat.
OpenClaw installed the ImageKit skill but can't call the tools
The ClawHub skill teaches OpenClaw about ImageKit, but the calls run through the ClawLink plugin and your connected account. Make sure ImageKit is connected in the dashboard, then start a fresh chat so OpenClaw reloads the tool catalog. If OpenClaw runs as a persistent gateway, restart it so the new tools register.
