How to connect Motion to Hermes Agent
Connect Motion to Hermes with ClawLink: paste your Motion key once and 27 tools work from chat. No MCP server to run, nothing stored on your machine.
MotionAPI KEYMCPManage Motion workspaces, projects, and tasks. Once connected, Hermes Agent can read and act on Motion from chat — pairing, token refresh, and tool wiring handled for you.
Most guides for giving Hermes Agent Motion access start with registering your own OAuth app or pasting API keys into env files, then leave the token refresh and tool wiring to you. ClawLink gives Hermes a more practical Motion setup: pair once in the browser and your always-on Hermes agent can act on Motion for you, reading and doing real work on your behalf with no auth, token refresh, or tool wiring to build yourself.
Copy this prompt into Hermes to install the plugin and pair your account.
Set up ClawLink for Hermes and tell me when it's ready.
1. Install the plugin:
hermes plugins install ClawLink-HQ/hermes-plugin --enable
2. Start pairing. It prints an approval link, so show me the link and stop, don't wait:
hermes clawlink begin
3. I'll approve it in my browser, then reply "approved".
4. When I say approved, finish setup:
hermes clawlink finish
5. Then run `hermes clawlink test` and tell me whether ClawLink is ready.Setup
It takes three steps to connect Hermes to Motion.
1Install and pair
Install the ClawLink plugin, then pair Hermes with a one-time browser approval:
hermes plugins install ClawLink-HQ/hermes-plugin --enable- 2
Connect Motion
Paste your API key in the dashboard.
- 3
Use it from chat
Ask Hermes Agent: "What can you do with Motion?"
Install by command
The prompt above walks Hermes through this. By hand, it is four commands and a browser approval:
hermes plugins install ClawLink-HQ/hermes-plugin --enable
hermes clawlink begin # prints an approval link — open it and approve
hermes clawlink finish # after approving in the browser
hermes clawlink testThen connect Motion in the ClawLink dashboard — paste your Motion API key once.
Verify the connection by asking Hermes:
Create it in Motion for me, then confirm the important fields before you finish.
Using a different agent?
The Hermes plugin is one client of ClawLink's MCP server. Claude Code, Cursor, Codex, or any agent that can run a shell command pairs with the same ClawLink account through the CLI:
npx -y @useclawlink/cli loginlogin opens the same browser approval and stores a credential locally. Once Motion is connected in the dashboard, that agent calls the same 27 Motion tools over MCP. Full setup for MCP clients and shell agents: connect apps to any AI agent.
Motion MCP for Hermes
Looking for a Motion MCP server for Hermes Agent? ClawLink connects Motion to Hermes Agent and exposes 27 Motion tools your agent can call over MCP, with hosted auth and nothing to run or maintain yourself. Using OpenClaw instead? The OpenClaw Motion integration works the same way.
What the Hermes Agent Motion integration can do
27 Motion tools are ready for Hermes Agent once the account is connected. The 22 below are the ones people reach for most; your agent can call all 27.
22 of 27 Motion tools for Hermes
| Tool | What it does |
|---|---|
Create comment motion_create_comment | Create a comment on a Motion task |
Create project motion_create_project | Create a new Motion project |
Create task motion_create_task | Create a new Motion task |
Get my user motion_get_my_user | Get the connected Motion user |
Get project motion_get_project | Get a Motion project by ID |
Get task motion_get_task | Get a Motion task by ID |
List comments motion_list_comments | List Motion comments |
List projects motion_list_projects | List Motion projects |
List recurring tasks motion_list_recurring_tasks | List Motion recurring tasks |
List schedules motion_list_schedules | List Motion schedules |
List tasks motion_list_tasks | List Motion tasks |
List users motion_list_users | List Motion workspace users |
List workspaces motion_list_workspaces | List Motion workspaces |
Move task motion_move_task | Move a Motion task to another project or status |
Update task motion_update_task | Update a Motion task |
List custom fields motion_list_custom_fields | Retrieve all custom fields for a given Motion workspace |
List statuses motion_list_statuses | Get a list of statuses for a Motion workspace |
Add custom field to project motion_add_custom_field_to_project | Add a custom field value to a project in Motion |
Add custom field to task motion_add_custom_field_to_task | Add a custom field value to a task in Motion |
Create custom field motion_create_custom_field | Create a new custom field in a Motion workspace |
Create recurring task motion_create_recurring_task | Create a new recurring task in Motion |
Unassign task motion_unassign_task | Unassign a task from its current assignee |
Try it: find the Motion tool you need
Browse the 22 Motion tools
Click any tool to see exactly what Hermes can do and copy a ready-to-use prompt.
Example prompts
Create it in Motion for me, then confirm the important fields before you finish.
Create it in Motion for me, then confirm the important fields before you finish.
Create it in Motion for me, then confirm the important fields before you finish.
Pull the relevant data from Motion, summarize it in plain English, and point out anything that needs attention.
ClawLink vs. building it yourself
The alternative to ClawLink is usually manual API key setup plus your own token handling, permission troubleshooting, and tool plumbing for Hermes Agent. That is fine if you want to build and maintain the integration yourself. Most teams just want Motion working from chat.
| Manual | ClawLink | |
|---|---|---|
| Credential handling | Collect, validate, store, and rotate the Motion API key yourself, then make sure every tool call uses the right account. | Users complete the hosted ClawLink setup once and the connected Motion account becomes available to the agent without you building credential management. |
| Ongoing maintenance | You own refresh logic, permission debugging, environment config, and every provider-specific edge case for Motion. | ClawLink handles the repetitive integration plumbing so your team can focus on the workflow instead of the infrastructure. |
| Agent usability | You still need to expose the right Motion actions to the runtime in a format your agent can reliably use. | 27 tools for Motion are already exposed through ClawLink, so the agent can read and act from chat immediately. |
ClawLink vs. Composio
Composio also exposes Motion to AI agents. It is developer infrastructure: Python and TypeScript SDKs, an MCP server, and a catalog past 1,000 apps, aimed at teams shipping agent products. ClawLink is built for Hermes Agent users instead. You install the plugin once, connect Motion in the browser, and the 27 tools above work from chat. There is no SDK and no config file, and the Motion key you paste at setup is stored server-side rather than kept in your environment. Choosing between them? Read the full Composio alternatives comparison.
Troubleshooting
Hermes paired but still can't use Motion
Pairing is a two-step handshake: run hermes clawlink begin, approve the link in your browser, then run hermes clawlink finish. If you ran finish before approving, or the approval link expired, run hermes clawlink begin again to get a fresh link. Confirm the plugin was installed with --enable, then verify with hermes clawlink test.
Connection succeeds but no tools appear
Reconnect Motion from the dashboard, then start a fresh chat if the runtime still has the old tool catalog loaded.
"Tool schema not loaded yet" error when calling Motion tools
Motion tool schemas load on demand the first time a tool runs and are cached after that, so this error usually clears on its own: wait a few seconds and retry the same request. If every Motion call keeps failing with it in a fresh chat, reconnect from the dashboard, and contact support if it still persists — that pattern points to a configuration problem on our side, not something you can fix by reconnecting again.
Motion returns 403 or "permission denied" on one action while others work
Two usual causes. The connected account may not have access to the specific workspace, inbox, store, or project in the request — check that first. If access looks right, the agent may have sent a placeholder value (like "YOUR_ID" or an example id from documentation) instead of a real one: ask it to run a list or search tool first, then retry the action with a real id from those results. Most failures at this stage are one of these two, not ClawLink bugs.
API key setup works but results look incomplete
Double-check that the API key for Motion has the right scopes or account access. A valid key can still be too limited for some reads or writes.
FAQ
Is there a Hermes Agent Motion integration?
Yes. ClawLink is the fastest way to connect Hermes to Motion: link your Motion account once in the browser and Hermes Agent can call the Motion API through 27 ready-made tools — no custom code or token handling.
How do I connect Motion to Hermes with ClawLink?
Install the plugin with hermes plugins install ClawLink-HQ/hermes-plugin --enable, then pair once: run hermes clawlink begin, approve the link in your browser, and run hermes clawlink finish. Connect Motion in the dashboard and Hermes can use it from the next message — no config files, and the Motion key you paste is stored server-side instead of in your environment.
How long does it take to connect Motion to Hermes Agent?
About two minutes. Sign in, click Connect next to Motion in the dashboard, authenticate, and Hermes Agent can use it from the next chat message.
Why use ClawLink instead of wiring Motion up myself?
The alternative to ClawLink is usually manual API key setup plus your own token handling, permission troubleshooting, and tool plumbing for Hermes Agent. That is fine if you want to build and maintain the integration yourself. Most teams just want Motion working from chat.
Hermes paired but still can't use Motion
Pairing is a two-step handshake: run hermes clawlink begin, approve the link in your browser, then run hermes clawlink finish. If you ran finish before approving, or the approval link expired, run hermes clawlink begin again to get a fresh link. Confirm the plugin was installed with --enable, then verify with hermes clawlink test.
