How to connect Dart to OpenClaw
Connect Dart to OpenClaw with ClawLink: paste your Dart key once and 18 tools work from chat. No MCP server to run, nothing stored on your machine.
DartAPI KEYMCPTask management and project planning with AI assistance. Once connected, OpenClaw can read and act on Dart from chat — pairing, token refresh, and tool wiring handled for you.
The usual route to Dart access for OpenClaw is an MCP server you configure and keep running, plus your own OAuth app or API keys. ClawLink gives OpenClaw a more practical Dart setup: install one ClawHub skill, connect Dart in the browser, and OpenClaw can call real Dart actions from any chat surface with no auth, token refresh, or tool wiring to build yourself.
Copy this prompt into OpenClaw, or open the Dart skill on ClawHub.
Before installing anything, inspect the ClawHub skill metadata and setup requirements.
If the skill asks you to install a third-party package or CLI, verify its source, maintainer, and package contents before running the install command.
Install the skill "Dart" (hith3sh/dart) from ClawHub only after those checks pass.
Skill page: https://clawhub.ai/hith3sh/dart
Keep the work scoped to this skill only.
After install, help me finish setup from verified skill metadata.
Use only the metadata you can verify from ClawHub; do not invent missing requirements.
Ask before making any broader environment changes.Setup
It takes three steps to connect OpenClaw to Dart.
1Install the plugin
Paste the setup prompt into OpenClaw, or install from the terminal and ask OpenClaw to pair:
openclaw plugins install clawhub:clawlink-plugin- 2
Connect Dart
Paste your API key in the dashboard.
- 3
Use it from chat
Ask OpenClaw: "What can you do with Dart?"
Install by command
The setup prompt above does all of this in one paste. By hand, it is one install command plus a browser approval:
openclaw plugins install clawhub:clawlink-pluginThen ask OpenClaw to set up ClawLink. It starts browser pairing and prints an approval link — open it, approve the device, return to the chat, and say done. Finally, connect Dart in the ClawLink dashboard — paste your Dart API key once.
Verify the connection by asking OpenClaw:
Pull the relevant data from Dart, summarize it in plain English, and point out anything that needs attention.
Using a different agent?
The OpenClaw plugin is one client of ClawLink's MCP server. Claude Code, Cursor, Codex, or any agent that can run a shell command pairs with the same ClawLink account through the CLI:
npx -y @useclawlink/cli loginlogin opens the same browser approval and stores a credential locally. Once Dart is connected in the dashboard, that agent calls the same 18 Dart tools over MCP. Full setup for MCP clients and shell agents: connect apps to any AI agent.
Dart MCP for OpenClaw
Looking for a Dart MCP server for OpenClaw? ClawLink connects Dart to OpenClaw and exposes 18 Dart tools your agent can call over MCP, with hosted auth and nothing to run or maintain yourself. Using Hermes instead? The Hermes Dart integration works the same way.
What the OpenClaw Dart integration can do
18 Dart tools are ready for OpenClaw once the account is connected. The 16 below are the ones people reach for most; your agent can call all 18.
16 of 18 Dart tools for OpenClaw
| Tool | What it does |
|---|---|
Get config dart_get_config | Retrieve workspace configuration including dartboards, folders, types, statuses, and more |
Get doc dart_get_doc | Retrieve an existing doc with metadata and content |
Get task dart_get_task | Retrieve an existing task with full details including title, dartboard, status, and description |
List comments dart_list_comments | List comments for a task with filtering options |
List docs dart_list_docs | List docs with filtering and search capabilities |
List help center articles dart_list_help_center_articles | Search help center articles by semantic similarity to query |
List tasks dart_list_tasks | List tasks with powerful filtering options |
Retrieve skill by title dart_retrieve_skill_by_title | Retrieve a skill by its exact title from the workspace |
Add task attachment from URL dart_add_task_attachment_from_url | Attach a file from a provided URL to a task |
Add task comment dart_add_task_comment | Create a new comment on a DART task |
Add task time tracking dart_add_task_time_tracking | Add a time tracking entry to a DART task |
Create doc dart_create_doc | Create a new doc in Dart |
Create task dart_create_task | Create a new task in DART with title and optional metadata |
Move task dart_move_task | Move a task to a specific position within its dartboard |
Update doc dart_update_doc | Update an existing doc in Dart |
Update task dart_update_task | Update an existing task in DART with new properties |
Try it: find the Dart tool you need
Browse the 16 Dart tools
Click any tool to see exactly what OpenClaw can do and copy a ready-to-use prompt.
Example prompts
Pull the relevant data from Dart, summarize it in plain English, and point out anything that needs attention.
Pull the relevant data from Dart, summarize it in plain English, and point out anything that needs attention.
Pull the relevant data from Dart, summarize it in plain English, and point out anything that needs attention.
List the relevant items in Dart, group them by priority, and recommend what OpenClaw should do next.
ClawLink vs. building it yourself
The alternative to ClawLink is usually manual API key setup plus your own token handling, permission troubleshooting, and tool plumbing for OpenClaw. That is fine if you want to build and maintain the integration yourself. Most teams just want Dart working from chat.
| Manual | ClawLink | |
|---|---|---|
| Credential handling | Collect, validate, store, and rotate the Dart API key yourself, then make sure every tool call uses the right account. | Users complete the hosted ClawLink setup once and the connected Dart account becomes available to the agent without you building credential management. |
| Ongoing maintenance | You own refresh logic, permission debugging, environment config, and every provider-specific edge case for Dart. | ClawLink handles the repetitive integration plumbing so your team can focus on the workflow instead of the infrastructure. |
| Agent usability | You still need to expose the right Dart actions to the runtime in a format your agent can reliably use. | 18 tools for Dart are already exposed through ClawLink, so the agent can read and act from chat immediately. |
ClawLink vs. Composio
Composio also exposes Dart to AI agents. It is developer infrastructure: Python and TypeScript SDKs, an MCP server, and a catalog past 1,000 apps, aimed at teams shipping agent products. ClawLink is built for OpenClaw users instead. You install the plugin once, connect Dart in the browser, and the 18 tools above work from chat. There is no SDK and no config file, and the Dart key you paste at setup is stored server-side rather than kept in your environment. Choosing between them? Read the full Composio alternatives comparison.
Troubleshooting
OpenClaw installed the Dart skill but can't call the tools
The ClawHub skill teaches OpenClaw about Dart, but the calls run through the ClawLink plugin and your connected account. Make sure Dart is connected in the dashboard, then start a fresh chat so OpenClaw reloads the tool catalog. If OpenClaw runs as a persistent gateway, restart it so the new tools register.
Connection succeeds but no tools appear
Reconnect Dart from the dashboard, then start a fresh chat if the runtime still has the old tool catalog loaded.
"Tool schema not loaded yet" error when calling Dart tools
Dart tool schemas load on demand the first time a tool runs and are cached after that, so this error usually clears on its own: wait a few seconds and retry the same request. If every Dart call keeps failing with it in a fresh chat, reconnect from the dashboard, and contact support if it still persists — that pattern points to a configuration problem on our side, not something you can fix by reconnecting again.
Dart returns 403 or "permission denied" on one action while others work
Two usual causes. The connected account may not have access to the specific workspace, inbox, store, or project in the request — check that first. If access looks right, the agent may have sent a placeholder value (like "YOUR_ID" or an example id from documentation) instead of a real one: ask it to run a list or search tool first, then retry the action with a real id from those results. Most failures at this stage are one of these two, not ClawLink bugs.
API key setup works but results look incomplete
Double-check that the API key for Dart has the right scopes or account access. A valid key can still be too limited for some reads or writes.
FAQ
Is there a OpenClaw Dart integration?
Yes. ClawLink is the fastest way to connect OpenClaw to Dart: link your Dart account once in the browser and OpenClaw can call the Dart API through 18 ready-made tools — no custom code or token handling.
How do I add Dart to OpenClaw with ClawLink?
Paste the setup prompt from this page into OpenClaw. It installs the ClawLink Dart skill from ClawHub, then you click Connect in the dashboard to authorize Dart. OpenClaw calls the tools from the next message — no config files, and the Dart key you paste is stored server-side instead of in your environment.
How long does it take to connect Dart to OpenClaw?
About two minutes. Sign in, click Connect next to Dart in the dashboard, authenticate, and OpenClaw can use it from the next chat message.
Why use ClawLink instead of wiring Dart up myself?
The alternative to ClawLink is usually manual API key setup plus your own token handling, permission troubleshooting, and tool plumbing for OpenClaw. That is fine if you want to build and maintain the integration yourself. Most teams just want Dart working from chat.
OpenClaw installed the Dart skill but can't call the tools
The ClawHub skill teaches OpenClaw about Dart, but the calls run through the ClawLink plugin and your connected account. Make sure Dart is connected in the dashboard, then start a fresh chat so OpenClaw reloads the tool catalog. If OpenClaw runs as a persistent gateway, restart it so the new tools register.
