How to connect Ip2Location to OpenClaw
Connect Ip2Location to OpenClaw with ClawLink: paste your Ip2Location key once and 8 tools work from chat. No MCP server to run, nothing stored on your machine.
Ip2LocationAPI KEYMCPIP2Location.io provides fast and accurate IP geolocation data, including country, city, ISP, latitude, longitude, and more, supporting both IPv4 and IPv6 lookups.. Once connected, OpenClaw can read and act on Ip2Location from chat — pairing, token refresh, and tool wiring handled for you.
The usual route to Ip2Location access for OpenClaw is an MCP server you configure and keep running, plus your own OAuth app or API keys. ClawLink gives OpenClaw a more practical Ip2Location setup: install one ClawHub skill, connect Ip2Location in the browser, and OpenClaw can call real Ip2Location actions from any chat surface with no auth, token refresh, or tool wiring to build yourself.
Setup
It takes three steps to connect OpenClaw to Ip2Location.
1Install the plugin
Paste the setup prompt into OpenClaw, or install from the terminal and ask OpenClaw to pair:
openclaw plugins install clawhub:clawlink-plugin- 2
Connect Ip2Location
Paste your API key in the dashboard.
- 3
Use it from chat
Ask OpenClaw: "What can you do with Ip2Location?"
Install by command
The setup prompt above does all of this in one paste. By hand, it is one install command plus a browser approval:
openclaw plugins install clawhub:clawlink-pluginThen ask OpenClaw to set up ClawLink. It starts browser pairing and prints an approval link — open it, approve the device, return to the chat, and say done. Finally, connect Ip2Location in the ClawLink dashboard — paste your Ip2Location API key once.
Verify the connection by asking OpenClaw:
Use Ip2Location to bulk ip geolocation and walk me through the result in plain English.
Using a different agent?
The OpenClaw plugin is one client of ClawLink's MCP server. Claude Code, Cursor, Codex, or any agent that can run a shell command pairs with the same ClawLink account through the CLI:
npx -y @useclawlink/cli loginlogin opens the same browser approval and stores a credential locally. Once Ip2Location is connected in the dashboard, that agent calls the same 8 Ip2Location tools over MCP. Full setup for MCP clients and shell agents: connect apps to any AI agent.
Ip2Location MCP for OpenClaw
Looking for a Ip2Location MCP server for OpenClaw? ClawLink connects Ip2Location to OpenClaw and exposes 8 Ip2Location tools your agent can call over MCP, with hosted auth and nothing to run or maintain yourself. Using Hermes instead? The Hermes Ip2Location integration works the same way.
What the OpenClaw Ip2Location integration can do
8 Ip2Location tools are ready for OpenClaw once the account is connected.
All 8 Ip2Location tools for OpenClaw
| Tool | What it does |
|---|---|
Bulk ip geolocation ip2location_bulk_ip_geolocation | Retrieve geolocation information for multiple IP addresses in a single request |
Check credits ip2location_check_credits | Check remaining IP2Location API credits |
Distance ip2location_distance | Calculate the great-circle distance between two IP addresses based on their geographic locations |
Get hosted domains ip2location_get_hosted_domains | Retrieves a list of domain names hosted on a specific IP address (IPv4 or IPv6) |
Get ip geolocation ip2location_get_ip_geolocation | Retrieve geolocation data for an IP address |
Get proxy detection ip2location_get_proxy_detection | Detect if an IP is a proxy, VPN, or TOR exit node |
Ip2 whois domain whois ip2location_ip2_whois_domain_whois | Retrieve WHOIS information for a domain |
List ips ip2location_list_ips | List a curated set of test IPv4 and IPv6 addresses |
Try it: find the Ip2Location tool you need
Browse the 8 Ip2Location tools
Click any tool to see exactly what OpenClaw can do and copy a ready-to-use prompt.
Example prompts
Use Ip2Location to bulk ip geolocation and walk me through the result in plain English.
Use Ip2Location to check credits and walk me through the result in plain English.
Use Ip2Location to distance and walk me through the result in plain English.
Pull the relevant data from Ip2Location, summarize it in plain English, and point out anything that needs attention.
ClawLink vs. building it yourself
The alternative to ClawLink is usually manual API key setup plus your own token handling, permission troubleshooting, and tool plumbing for OpenClaw. That is fine if you want to build and maintain the integration yourself. Most teams just want Ip2Location working from chat.
| Manual | ClawLink | |
|---|---|---|
| Credential handling | Collect, validate, store, and rotate the Ip2Location API key yourself, then make sure every tool call uses the right account. | Users complete the hosted ClawLink setup once and the connected Ip2Location account becomes available to the agent without you building credential management. |
| Ongoing maintenance | You own refresh logic, permission debugging, environment config, and every provider-specific edge case for Ip2Location. | ClawLink handles the repetitive integration plumbing so your team can focus on the workflow instead of the infrastructure. |
| Agent usability | You still need to expose the right Ip2Location actions to the runtime in a format your agent can reliably use. | 8 tools for Ip2Location are already exposed through ClawLink, so the agent can read and act from chat immediately. |
ClawLink vs. Composio
Composio also exposes Ip2Location to AI agents. It is developer infrastructure: Python and TypeScript SDKs, an MCP server, and a catalog past 1,000 apps, aimed at teams shipping agent products. ClawLink is built for OpenClaw users instead. You install the plugin once, connect Ip2Location in the browser, and the 8 tools above work from chat. There is no SDK and no config file, and the Ip2Location key you paste at setup is stored server-side rather than kept in your environment. Choosing between them? Read the full Composio alternatives comparison.
Troubleshooting
OpenClaw installed the Ip2Location skill but can't call the tools
The ClawHub skill teaches OpenClaw about Ip2Location, but the calls run through the ClawLink plugin and your connected account. Make sure Ip2Location is connected in the dashboard, then start a fresh chat so OpenClaw reloads the tool catalog. If OpenClaw runs as a persistent gateway, restart it so the new tools register.
Connection succeeds but no tools appear
Reconnect Ip2Location from the dashboard, then start a fresh chat if the runtime still has the old tool catalog loaded.
"Tool schema not loaded yet" error when calling Ip2Location tools
Ip2Location tool schemas load on demand the first time a tool runs and are cached after that, so this error usually clears on its own: wait a few seconds and retry the same request. If every Ip2Location call keeps failing with it in a fresh chat, reconnect from the dashboard, and contact support if it still persists — that pattern points to a configuration problem on our side, not something you can fix by reconnecting again.
Ip2Location returns 403 or "permission denied" on one action while others work
Two usual causes. The connected account may not have access to the specific workspace, inbox, store, or project in the request — check that first. If access looks right, the agent may have sent a placeholder value (like "YOUR_ID" or an example id from documentation) instead of a real one: ask it to run a list or search tool first, then retry the action with a real id from those results. Most failures at this stage are one of these two, not ClawLink bugs.
API key setup works but results look incomplete
Double-check that the API key for Ip2Location has the right scopes or account access. A valid key can still be too limited for some reads or writes.
FAQ
Is there a OpenClaw Ip2Location integration?
Yes. ClawLink is the fastest way to connect OpenClaw to Ip2Location: link your Ip2Location account once in the browser and OpenClaw can call the Ip2Location API through 8 ready-made tools — no custom code or token handling.
How do I add Ip2Location to OpenClaw with ClawLink?
Paste the setup prompt from this page into OpenClaw. It installs the ClawLink Ip2Location skill from ClawHub, then you click Connect in the dashboard to authorize Ip2Location. OpenClaw calls the tools from the next message — no config files, and the Ip2Location key you paste is stored server-side instead of in your environment.
How long does it take to connect Ip2Location to OpenClaw?
About two minutes. Sign in, click Connect next to Ip2Location in the dashboard, authenticate, and OpenClaw can use it from the next chat message.
Why use ClawLink instead of wiring Ip2Location up myself?
The alternative to ClawLink is usually manual API key setup plus your own token handling, permission troubleshooting, and tool plumbing for OpenClaw. That is fine if you want to build and maintain the integration yourself. Most teams just want Ip2Location working from chat.
OpenClaw installed the Ip2Location skill but can't call the tools
The ClawHub skill teaches OpenClaw about Ip2Location, but the calls run through the ClawLink plugin and your connected account. Make sure Ip2Location is connected in the dashboard, then start a fresh chat so OpenClaw reloads the tool catalog. If OpenClaw runs as a persistent gateway, restart it so the new tools register.
Related
OpenClaw PostHog integration
Track user behavior and feature flags
DataforSEO
SEO data APIs for keywords, SERP, and site audits
OpenClaw Metabase integration
Metabase is an open-source business intelligence tool that lets you ask questions about your data and visualize answers as charts, graphs, and dashboards.