How to connect LeadBoxer to OpenClaw
Connect LeadBoxer to OpenClaw with ClawLink: paste your LeadBoxer key once and 9 tools work from chat. No MCP server to run, nothing stored on your machine.
LeadBoxerAPI KEYMCPLead generation platform that gives you real-time info about companies and people that visit your website.. Once connected, OpenClaw can read and act on LeadBoxer from chat — pairing, token refresh, and tool wiring handled for you.
The usual route to LeadBoxer access for OpenClaw is an MCP server you configure and keep running, plus your own OAuth app or API keys. ClawLink gives OpenClaw a more practical LeadBoxer setup: install one ClawHub skill, connect LeadBoxer in the browser, and OpenClaw can call real LeadBoxer actions from any chat surface with no auth, token refresh, or tool wiring to build yourself.
Setup
It takes three steps to connect OpenClaw to LeadBoxer.
1Install the plugin
Paste the setup prompt into OpenClaw, or install from the terminal and ask OpenClaw to pair:
openclaw plugins install clawhub:clawlink-plugin- 2
Connect LeadBoxer
Paste your API key in the dashboard.
- 3
Use it from chat
Ask OpenClaw: "What can you do with LeadBoxer?"
Install by command
The setup prompt above does all of this in one paste. By hand, it is one install command plus a browser approval:
openclaw plugins install clawhub:clawlink-pluginThen ask OpenClaw to set up ClawLink. It starts browser pairing and prints an approval link — open it, approve the device, return to the chat, and say done. Finally, connect LeadBoxer in the ClawLink dashboard — paste your LeadBoxer API key once.
Verify the connection by asking OpenClaw:
Pull the relevant data from LeadBoxer, summarize it in plain English, and point out anything that needs attention.
Using a different agent?
The OpenClaw plugin is one client of ClawLink's MCP server. Claude Code, Cursor, Codex, or any agent that can run a shell command pairs with the same ClawLink account through the CLI:
npx -y @useclawlink/cli loginlogin opens the same browser approval and stores a credential locally. Once LeadBoxer is connected in the dashboard, that agent calls the same 9 LeadBoxer tools over MCP. Full setup for MCP clients and shell agents: connect apps to any AI agent.
LeadBoxer MCP for OpenClaw
Looking for a LeadBoxer MCP server for OpenClaw? ClawLink connects LeadBoxer to OpenClaw and exposes 9 LeadBoxer tools your agent can call over MCP, with hosted auth and nothing to run or maintain yourself. Using Hermes instead? The Hermes LeadBoxer integration works the same way.
What the OpenClaw LeadBoxer integration can do
9 LeadBoxer tools are ready for OpenClaw once the account is connected. The 8 below are the ones people reach for most; your agent can call all 9.
8 of 9 LeadBoxer tools for OpenClaw
| Tool | What it does |
|---|---|
Get events leadboxer_get_events | Fetch events for specified sessions from LeadBoxer |
Get lead score formula leadboxer_get_lead_score_formula | Fetch the lead score formula for a specific dataset |
Get sessions leadboxer_get_sessions | Fetch sessions for a specified lead ID from LeadBoxer |
Management ctd leadboxer_management_ctd | Fetch custom tracking domain entries for a dataset |
Views lead detail leadboxer_views_lead_detail | Fetch detailed information about a lead based on filters |
Add or update lead tags leadboxer_add_or_update_lead_tags | Add or update lead tags in LeadBoxer |
Log event leadboxer_log_event | Track server-side events in LeadBoxer |
Post event leadboxer_post_event | Send event data for tracking user activities via POST request |
Try it: find the LeadBoxer tool you need
Browse the 8 LeadBoxer tools
Click any tool to see exactly what OpenClaw can do and copy a ready-to-use prompt.
Example prompts
Pull the relevant data from LeadBoxer, summarize it in plain English, and point out anything that needs attention.
Pull the relevant data from LeadBoxer, summarize it in plain English, and point out anything that needs attention.
Pull the relevant data from LeadBoxer, summarize it in plain English, and point out anything that needs attention.
Use LeadBoxer to management ctd and walk me through the result in plain English.
ClawLink vs. building it yourself
The alternative to ClawLink is usually manual API key setup plus your own token handling, permission troubleshooting, and tool plumbing for OpenClaw. That is fine if you want to build and maintain the integration yourself. Most teams just want LeadBoxer working from chat.
| Manual | ClawLink | |
|---|---|---|
| Credential handling | Collect, validate, store, and rotate the LeadBoxer API key yourself, then make sure every tool call uses the right account. | Users complete the hosted ClawLink setup once and the connected LeadBoxer account becomes available to the agent without you building credential management. |
| Ongoing maintenance | You own refresh logic, permission debugging, environment config, and every provider-specific edge case for LeadBoxer. | ClawLink handles the repetitive integration plumbing so your team can focus on the workflow instead of the infrastructure. |
| Agent usability | You still need to expose the right LeadBoxer actions to the runtime in a format your agent can reliably use. | 9 tools for LeadBoxer are already exposed through ClawLink, so the agent can read and act from chat immediately. |
ClawLink vs. Composio
Composio also exposes LeadBoxer to AI agents. It is developer infrastructure: Python and TypeScript SDKs, an MCP server, and a catalog past 1,000 apps, aimed at teams shipping agent products. ClawLink is built for OpenClaw users instead. You install the plugin once, connect LeadBoxer in the browser, and the 9 tools above work from chat. There is no SDK and no config file, and the LeadBoxer key you paste at setup is stored server-side rather than kept in your environment. Choosing between them? Read the full Composio alternatives comparison.
Troubleshooting
OpenClaw installed the LeadBoxer skill but can't call the tools
The ClawHub skill teaches OpenClaw about LeadBoxer, but the calls run through the ClawLink plugin and your connected account. Make sure LeadBoxer is connected in the dashboard, then start a fresh chat so OpenClaw reloads the tool catalog. If OpenClaw runs as a persistent gateway, restart it so the new tools register.
Connection succeeds but no tools appear
Reconnect LeadBoxer from the dashboard, then start a fresh chat if the runtime still has the old tool catalog loaded.
"Tool schema not loaded yet" error when calling LeadBoxer tools
LeadBoxer tool schemas load on demand the first time a tool runs and are cached after that, so this error usually clears on its own: wait a few seconds and retry the same request. If every LeadBoxer call keeps failing with it in a fresh chat, reconnect from the dashboard, and contact support if it still persists — that pattern points to a configuration problem on our side, not something you can fix by reconnecting again.
LeadBoxer returns 403 or "permission denied" on one action while others work
Two usual causes. The connected account may not have access to the specific workspace, inbox, store, or project in the request — check that first. If access looks right, the agent may have sent a placeholder value (like "YOUR_ID" or an example id from documentation) instead of a real one: ask it to run a list or search tool first, then retry the action with a real id from those results. Most failures at this stage are one of these two, not ClawLink bugs.
API key setup works but results look incomplete
Double-check that the API key for LeadBoxer has the right scopes or account access. A valid key can still be too limited for some reads or writes.
FAQ
Is there a OpenClaw LeadBoxer integration?
Yes. ClawLink is the fastest way to connect OpenClaw to LeadBoxer: link your LeadBoxer account once in the browser and OpenClaw can call the LeadBoxer API through 9 ready-made tools — no custom code or token handling.
How do I add LeadBoxer to OpenClaw with ClawLink?
Paste the setup prompt from this page into OpenClaw. It installs the ClawLink LeadBoxer skill from ClawHub, then you click Connect in the dashboard to authorize LeadBoxer. OpenClaw calls the tools from the next message — no config files, and the LeadBoxer key you paste is stored server-side instead of in your environment.
How long does it take to connect LeadBoxer to OpenClaw?
About two minutes. Sign in, click Connect next to LeadBoxer in the dashboard, authenticate, and OpenClaw can use it from the next chat message.
Why use ClawLink instead of wiring LeadBoxer up myself?
The alternative to ClawLink is usually manual API key setup plus your own token handling, permission troubleshooting, and tool plumbing for OpenClaw. That is fine if you want to build and maintain the integration yourself. Most teams just want LeadBoxer working from chat.
OpenClaw installed the LeadBoxer skill but can't call the tools
The ClawHub skill teaches OpenClaw about LeadBoxer, but the calls run through the ClawLink plugin and your connected account. Make sure LeadBoxer is connected in the dashboard, then start a fresh chat so OpenClaw reloads the tool catalog. If OpenClaw runs as a persistent gateway, restart it so the new tools register.
