How to connect ManyReach to OpenClaw (paste one key, 16 tools)

The usual route to ManyReach access for OpenClaw is an MCP server you configure and keep running, plus your own OAuth app or API keys. ClawLink gives OpenClaw a more practical ManyReach setup: install one ClawHub skill, connect ManyReach in the browser, and OpenClaw can call real ManyReach actions from any chat surface with no auth, token refresh, or tool wiring to build yourself.

Setup

It takes three steps to connect OpenClaw to ManyReach.

1
Install the plugin
Paste the setup prompt into OpenClaw, or install from the terminal and ask OpenClaw to pair:
openclaw plugins install clawhub:clawlink-plugin
2
Connect ManyReach
Paste your API key in the dashboard.
3
Use it from chat
Ask OpenClaw: "What can you do with ManyReach?"

Install by command

The setup prompt above does all of this in one paste. By hand, it is one install command plus a browser approval:

openclaw plugins install clawhub:clawlink-plugin

Then ask OpenClaw to set up ClawLink. It starts browser pairing and prints an approval link — open it, approve the device, return to the chat, and say done. Finally, connect ManyReach in the ClawLink dashboard — paste your ManyReach API key once.

Verify the connection by asking OpenClaw:

Pull the relevant data from ManyReach, summarize it in plain English, and point out anything that needs attention.

Using a different agent?

The OpenClaw plugin is one client of ClawLink's MCP server. Claude Code, Cursor, Codex, or any agent that can run a shell command pairs with the same ClawLink account through the CLI:

npx -y @useclawlink/cli login

login opens the same browser approval and stores a credential locally. Once ManyReach is connected in the dashboard, that agent calls the same 16 ManyReach tools over MCP. Full setup for MCP clients and shell agents: connect apps to any AI agent.

ManyReach MCP for OpenClaw

Looking for a ManyReach MCP server for OpenClaw? ClawLink connects ManyReach to OpenClaw and exposes 16 ManyReach tools your agent can call over MCP, with hosted auth and nothing to run or maintain yourself. Using Hermes instead? The Hermes ManyReach integration works the same way.

What the OpenClaw ManyReach integration can do

16 ManyReach tools are ready for OpenClaw once the account is connected. The 15 below are the ones people reach for most; your agent can call all 16.

15 of 16 ManyReach tools for OpenClaw

Tool	What it does
Get account overview `manyreach_get_account_overview`	Return the authenticated ManyReach organization together with its sending-credit and data-token
List campaigns `manyreach_list_campaigns`	Find campaigns in the authenticated organization, optionally filtering by lifecycle status or
List lists `manyreach_list_lists`	Return one page of mailing lists available for organizing and importing prospects
List messages `manyreach_list_messages`	Retrieve one read-only page of reply, sent, or manually sent messages with campaign, followup
List prospects `manyreach_list_prospects`	Search and filter prospects by identity, CRM status, tags, campaign membership, and existing
List senders `manyreach_list_senders`	Find configured sender mailboxes by folder, connection status, warmup state, or search text
List tags `manyreach_list_tags`	Find CRM, campaign, or sender tags and optionally include prospect counts
Create campaign `manyreach_create_campaign`	Create and save a new draft campaign's configuration
Create list `manyreach_create_list`	Create a ManyReach mailing list
Create prospect `manyreach_create_prospect`	Create one ManyReach prospect
Create tag `manyreach_create_tag`	Create a CRM, campaign, or sender tag
Update campaign `manyreach_update_campaign`	Update an existing draft campaign's configuration
Update list `manyreach_update_list`	Rename or move an existing ManyReach mailing list
Update prospect `manyreach_update_prospect`	Update contact, personalization, list, CRM, or campaign-sending eligibility fields for one
Update tag `manyreach_update_tag`	Update an existing tag's title and description

Try it: find the ManyReach tool you need

Browse the 15 ManyReach tools

Click any tool to see exactly what OpenClaw can do and copy a ready-to-use prompt.

Example prompts

Pull the relevant data from ManyReach, summarize it in plain English, and point out anything that needs attention.

List the relevant items in ManyReach, group them by priority, and recommend what OpenClaw should do next.

ClawLink vs. building it yourself

The alternative to ClawLink is usually manual API key setup plus your own token handling, permission troubleshooting, and tool plumbing for OpenClaw. That is fine if you want to build and maintain the integration yourself. Most teams just want ManyReach working from chat.

	Manual	ClawLink
Credential handling	Collect, validate, store, and rotate the ManyReach API key yourself, then make sure every tool call uses the right account.	Users complete the hosted ClawLink setup once and the connected ManyReach account becomes available to the agent without you building credential management.
Ongoing maintenance	You own refresh logic, permission debugging, environment config, and every provider-specific edge case for ManyReach.	ClawLink handles the repetitive integration plumbing so your team can focus on the workflow instead of the infrastructure.
Agent usability	You still need to expose the right ManyReach actions to the runtime in a format your agent can reliably use.	16 tools for ManyReach are already exposed through ClawLink, so the agent can read and act from chat immediately.

ClawLink vs. Composio

Composio also exposes ManyReach to AI agents. It is developer infrastructure: Python and TypeScript SDKs, an MCP server, and a catalog past 1,000 apps, aimed at teams shipping agent products. ClawLink is built for OpenClaw users instead. You install the plugin once, connect ManyReach in the browser, and the 16 tools above work from chat. There is no SDK and no config file, and the ManyReach key you paste at setup is stored server-side rather than kept in your environment. Choosing between them? Read the full Composio alternatives comparison.

Troubleshooting

OpenClaw installed the ManyReach skill but can't call the tools

The ClawHub skill teaches OpenClaw about ManyReach, but the calls run through the ClawLink plugin and your connected account. Make sure ManyReach is connected in the dashboard, then start a fresh chat so OpenClaw reloads the tool catalog. If OpenClaw runs as a persistent gateway, restart it so the new tools register.

Connection succeeds but no tools appear

Reconnect ManyReach from the dashboard, then start a fresh chat if the runtime still has the old tool catalog loaded.

"Tool schema not loaded yet" error when calling ManyReach tools

ManyReach tool schemas load on demand the first time a tool runs and are cached after that, so this error usually clears on its own: wait a few seconds and retry the same request. If every ManyReach call keeps failing with it in a fresh chat, reconnect from the dashboard, and contact support if it still persists — that pattern points to a configuration problem on our side, not something you can fix by reconnecting again.

ManyReach returns 403 or "permission denied" on one action while others work

Two usual causes. The connected account may not have access to the specific workspace, inbox, store, or project in the request — check that first. If access looks right, the agent may have sent a placeholder value (like "YOUR_ID" or an example id from documentation) instead of a real one: ask it to run a list or search tool first, then retry the action with a real id from those results. Most failures at this stage are one of these two, not ClawLink bugs.

API key setup works but results look incomplete

Double-check that the API key for ManyReach has the right scopes or account access. A valid key can still be too limited for some reads or writes.

FAQ

Is there a OpenClaw ManyReach integration?

Yes. ClawLink is the fastest way to connect OpenClaw to ManyReach: link your ManyReach account once in the browser and OpenClaw can call the ManyReach API through 16 ready-made tools — no custom code or token handling.

How do I add ManyReach to OpenClaw with ClawLink?

Paste the setup prompt from this page into OpenClaw. It installs the ClawLink ManyReach skill from ClawHub, then you click Connect in the dashboard to authorize ManyReach. OpenClaw calls the tools from the next message — no config files, and the ManyReach key you paste is stored server-side instead of in your environment.

How long does it take to connect ManyReach to OpenClaw?

About two minutes. Sign in, click Connect next to ManyReach in the dashboard, authenticate, and OpenClaw can use it from the next chat message.

Why use ClawLink instead of wiring ManyReach up myself?

OpenClaw installed the ManyReach skill but can't call the tools

How to connect ManyReach to OpenClaw

Setup

Install the plugin

Connect ManyReach

Use it from chat