How to connect Postalytics to OpenClaw
Connect Postalytics to OpenClaw with ClawLink: paste your Postalytics key once and 24 tools work from chat. No MCP server to run, nothing stored on your machine.
PostalyticsAPI KEYMCPDirect Mail Automation software in the cloud with deep integration to CRM and workflows, making direct mail look, act and feel like a digital marketing channel.. Once connected, OpenClaw can read and act on Postalytics from chat — pairing, token refresh, and tool wiring handled for you.
The usual route to Postalytics access for OpenClaw is an MCP server you configure and keep running, plus your own OAuth app or API keys. ClawLink gives OpenClaw a more practical Postalytics setup: install one ClawHub skill, connect Postalytics in the browser, and OpenClaw can call real Postalytics actions from any chat surface with no auth, token refresh, or tool wiring to build yourself.
Setup
It takes three steps to connect OpenClaw to Postalytics.
1Install the plugin
Paste the setup prompt into OpenClaw, or install from the terminal and ask OpenClaw to pair:
openclaw plugins install clawhub:clawlink-plugin- 2
Connect Postalytics
Paste your API key in the dashboard.
- 3
Use it from chat
Ask OpenClaw: "What can you do with Postalytics?"
Install by command
The setup prompt above does all of this in one paste. By hand, it is one install command plus a browser approval:
openclaw plugins install clawhub:clawlink-pluginThen ask OpenClaw to set up ClawLink. It starts browser pairing and prints an approval link — open it, approve the device, return to the chat, and say done. Finally, connect Postalytics in the ClawLink dashboard — paste your Postalytics API key once.
Verify the connection by asking OpenClaw:
Pull the relevant data from Postalytics, summarize it in plain English, and point out anything that needs attention.
Using a different agent?
The OpenClaw plugin is one client of ClawLink's MCP server. Claude Code, Cursor, Codex, or any agent that can run a shell command pairs with the same ClawLink account through the CLI:
npx -y @useclawlink/cli loginlogin opens the same browser approval and stores a credential locally. Once Postalytics is connected in the dashboard, that agent calls the same 24 Postalytics tools over MCP. Full setup for MCP clients and shell agents: connect apps to any AI agent.
Postalytics MCP for OpenClaw
Looking for a Postalytics MCP server for OpenClaw? ClawLink connects Postalytics to OpenClaw and exposes 24 Postalytics tools your agent can call over MCP, with hosted auth and nothing to run or maintain yourself. Using Hermes instead? The Hermes Postalytics integration works the same way.
What the OpenClaw Postalytics integration can do
24 Postalytics tools are ready for OpenClaw once the account is connected. The 20 below are the ones people reach for most; your agent can call all 24.
20 of 24 Postalytics tools for OpenClaw
| Tool | What it does |
|---|---|
Get all contact lists postalytics_get_all_contact_lists | Retrieve all contact lists for an account |
Get all contacts on a list postalytics_get_all_contacts_on_a_list | Retrieve all contacts from a specified contact list with pagination support |
Get all drip campaigns postalytics_get_all_drip_campaigns | Retrieve all triggered drip campaign names and endpoint IDs in the account |
Get all flows postalytics_get_all_flows | Retrieve all flows for the requester's account |
Get all webhooks postalytics_get_all_webhooks | Retrieve all webhooks configured for the authenticated account |
Get integrations postalytics_get_integrations | Retrieve all Connect integrations configured for the authenticated user's account |
Get my account postalytics_get_my_account | Retrieve basic account information for the authenticated user |
Get suppression list postalytics_get_suppression_list | Get the details of a suppression list based on the id supplied |
Get suppression list contact postalytics_get_suppression_list_contact | Retrieve a specific contact from a suppression list |
Get suppression list contacts postalytics_get_suppression_list_contacts | Get all contacts on a specified suppression list |
Get suppression lists postalytics_get_suppression_lists | Retrieve all suppression lists for the authenticated user |
Add account postalytics_add_account | Create a new sub-account in the Postalytics system |
Add contact postalytics_add_contact | Add a contact to a specified contact list with their information |
Create new campaign postalytics_create_new_campaign | Create a new direct mail campaign in Postalytics |
Create suppression list postalytics_create_suppression_list | Create a new suppression list that can be used in campaigns to suppress contacts from being |
Create suppression list contact postalytics_create_suppression_list_contact | Create a new suppression contact on a specified suppression list |
Create template postalytics_create_template | Create a new template with full HTML for postcard or letter |
Create webhook postalytics_create_webhook | Create a new webhook to receive campaign event notifications from Postalytics |
Update account postalytics_update_account | Update an existing account in the Postalytics system |
Update suppression list contact postalytics_update_suppression_list_contact | Update a suppression contact on the specified suppression list |
Try it: find the Postalytics tool you need
Browse the 20 Postalytics tools
Click any tool to see exactly what OpenClaw can do and copy a ready-to-use prompt.
Example prompts
Pull the relevant data from Postalytics, summarize it in plain English, and point out anything that needs attention.
Pull the relevant data from Postalytics, summarize it in plain English, and point out anything that needs attention.
Pull the relevant data from Postalytics, summarize it in plain English, and point out anything that needs attention.
Pull the relevant data from Postalytics, summarize it in plain English, and point out anything that needs attention.
ClawLink vs. building it yourself
The alternative to ClawLink is usually manual API key setup plus your own token handling, permission troubleshooting, and tool plumbing for OpenClaw. That is fine if you want to build and maintain the integration yourself. Most teams just want Postalytics working from chat.
| Manual | ClawLink | |
|---|---|---|
| Credential handling | Collect, validate, store, and rotate the Postalytics API key yourself, then make sure every tool call uses the right account. | Users complete the hosted ClawLink setup once and the connected Postalytics account becomes available to the agent without you building credential management. |
| Ongoing maintenance | You own refresh logic, permission debugging, environment config, and every provider-specific edge case for Postalytics. | ClawLink handles the repetitive integration plumbing so your team can focus on the workflow instead of the infrastructure. |
| Agent usability | You still need to expose the right Postalytics actions to the runtime in a format your agent can reliably use. | 24 tools for Postalytics are already exposed through ClawLink, so the agent can read and act from chat immediately. |
ClawLink vs. Composio
Composio also exposes Postalytics to AI agents. It is developer infrastructure: Python and TypeScript SDKs, an MCP server, and a catalog past 1,000 apps, aimed at teams shipping agent products. ClawLink is built for OpenClaw users instead. You install the plugin once, connect Postalytics in the browser, and the 24 tools above work from chat. There is no SDK and no config file, and the Postalytics key you paste at setup is stored server-side rather than kept in your environment. Choosing between them? Read the full Composio alternatives comparison.
Troubleshooting
OpenClaw installed the Postalytics skill but can't call the tools
The ClawHub skill teaches OpenClaw about Postalytics, but the calls run through the ClawLink plugin and your connected account. Make sure Postalytics is connected in the dashboard, then start a fresh chat so OpenClaw reloads the tool catalog. If OpenClaw runs as a persistent gateway, restart it so the new tools register.
Connection succeeds but no tools appear
Reconnect Postalytics from the dashboard, then start a fresh chat if the runtime still has the old tool catalog loaded.
"Tool schema not loaded yet" error when calling Postalytics tools
Postalytics tool schemas load on demand the first time a tool runs and are cached after that, so this error usually clears on its own: wait a few seconds and retry the same request. If every Postalytics call keeps failing with it in a fresh chat, reconnect from the dashboard, and contact support if it still persists — that pattern points to a configuration problem on our side, not something you can fix by reconnecting again.
Postalytics returns 403 or "permission denied" on one action while others work
Two usual causes. The connected account may not have access to the specific workspace, inbox, store, or project in the request — check that first. If access looks right, the agent may have sent a placeholder value (like "YOUR_ID" or an example id from documentation) instead of a real one: ask it to run a list or search tool first, then retry the action with a real id from those results. Most failures at this stage are one of these two, not ClawLink bugs.
API key setup works but results look incomplete
Double-check that the API key for Postalytics has the right scopes or account access. A valid key can still be too limited for some reads or writes.
FAQ
Is there a OpenClaw Postalytics integration?
Yes. ClawLink is the fastest way to connect OpenClaw to Postalytics: link your Postalytics account once in the browser and OpenClaw can call the Postalytics API through 24 ready-made tools — no custom code or token handling.
How do I add Postalytics to OpenClaw with ClawLink?
Paste the setup prompt from this page into OpenClaw. It installs the ClawLink Postalytics skill from ClawHub, then you click Connect in the dashboard to authorize Postalytics. OpenClaw calls the tools from the next message — no config files, and the Postalytics key you paste is stored server-side instead of in your environment.
How long does it take to connect Postalytics to OpenClaw?
About two minutes. Sign in, click Connect next to Postalytics in the dashboard, authenticate, and OpenClaw can use it from the next chat message.
Why use ClawLink instead of wiring Postalytics up myself?
The alternative to ClawLink is usually manual API key setup plus your own token handling, permission troubleshooting, and tool plumbing for OpenClaw. That is fine if you want to build and maintain the integration yourself. Most teams just want Postalytics working from chat.
OpenClaw installed the Postalytics skill but can't call the tools
The ClawHub skill teaches OpenClaw about Postalytics, but the calls run through the ClawLink plugin and your connected account. Make sure Postalytics is connected in the dashboard, then start a fresh chat so OpenClaw reloads the tool catalog. If OpenClaw runs as a persistent gateway, restart it so the new tools register.
