How to connect Woodpecker Co to OpenClaw
Connect Woodpecker Co to OpenClaw with ClawLink: paste your Woodpecker Co key once and 8 tools work from chat. No MCP server to run, nothing stored on your machine.
Woodpecker CoAPI KEYMCPWoodpecker.co is a cold email tool that automates personalized email outreach and follow-ups for sales teams and agencies.. Once connected, OpenClaw can read and act on Woodpecker Co from chat — pairing, token refresh, and tool wiring handled for you.
The usual route to Woodpecker Co access for OpenClaw is an MCP server you configure and keep running, plus your own OAuth app or API keys. ClawLink gives OpenClaw a more practical Woodpecker Co setup: install one ClawHub skill, connect Woodpecker Co in the browser, and OpenClaw can call real Woodpecker Co actions from any chat surface with no auth, token refresh, or tool wiring to build yourself.
Setup
It takes three steps to connect OpenClaw to Woodpecker Co.
1Install the plugin
Paste the setup prompt into OpenClaw, or install from the terminal and ask OpenClaw to pair:
openclaw plugins install clawhub:clawlink-plugin- 2
Connect Woodpecker Co
Paste your API key in the dashboard.
- 3
Use it from chat
Ask OpenClaw: "What can you do with Woodpecker Co?"
Install by command
The setup prompt above does all of this in one paste. By hand, it is one install command plus a browser approval:
openclaw plugins install clawhub:clawlink-pluginThen ask OpenClaw to set up ClawLink. It starts browser pairing and prints an approval link — open it, approve the device, return to the chat, and say done. Finally, connect Woodpecker Co in the ClawLink dashboard — paste your Woodpecker Co API key once.
Verify the connection by asking OpenClaw:
Pull the relevant data from Woodpecker Co, summarize it in plain English, and point out anything that needs attention.
Using a different agent?
The OpenClaw plugin is one client of ClawLink's MCP server. Claude Code, Cursor, Codex, or any agent that can run a shell command pairs with the same ClawLink account through the CLI:
npx -y @useclawlink/cli loginlogin opens the same browser approval and stores a credential locally. Once Woodpecker Co is connected in the dashboard, that agent calls the same 8 Woodpecker Co tools over MCP. Full setup for MCP clients and shell agents: connect apps to any AI agent.
Woodpecker Co MCP for OpenClaw
Looking for a Woodpecker Co MCP server for OpenClaw? ClawLink connects Woodpecker Co to OpenClaw and exposes 8 Woodpecker Co tools your agent can call over MCP, with hosted auth and nothing to run or maintain yourself. Using Hermes instead? The Hermes Woodpecker Co integration works the same way.
What the OpenClaw Woodpecker Co integration can do
8 Woodpecker Co tools are ready for OpenClaw once the account is connected. The 7 below are the ones people reach for most; your agent can call all 8.
7 of 8 Woodpecker Co tools for OpenClaw
| Tool | What it does |
|---|---|
Get prospects in campaigns v1 woodpecker_co_get_prospects_in_campaigns_v1 | Retrieve prospects enrolled in specified campaigns |
List available webhook events woodpecker_co_list_available_webhook_events | List all webhook event names supported by Woodpecker |
List campaigns v1 woodpecker_co_list_campaigns_v1 | List campaigns |
Add prospects to campaign v1 woodpecker_co_add_prospects_to_campaign_v1 | Add one or multiple prospects to a campaign |
Pause campaign woodpecker_co_pause_campaign | Pause a campaign |
Run campaign woodpecker_co_run_campaign | Run a campaign and set its status to RUNNING |
Stop campaign woodpecker_co_stop_campaign | Stop a campaign |
Try it: find the Woodpecker Co tool you need
Browse the 7 Woodpecker Co tools
Click any tool to see exactly what OpenClaw can do and copy a ready-to-use prompt.
Example prompts
Pull the relevant data from Woodpecker Co, summarize it in plain English, and point out anything that needs attention.
List the relevant items in Woodpecker Co, group them by priority, and recommend what OpenClaw should do next.
List the relevant items in Woodpecker Co, group them by priority, and recommend what OpenClaw should do next.
Use Woodpecker Co to add prospects to campaign v1 and walk me through the result in plain English.
ClawLink vs. building it yourself
The alternative to ClawLink is usually manual API key setup plus your own token handling, permission troubleshooting, and tool plumbing for OpenClaw. That is fine if you want to build and maintain the integration yourself. Most teams just want Woodpecker Co working from chat.
| Manual | ClawLink | |
|---|---|---|
| Credential handling | Collect, validate, store, and rotate the Woodpecker Co API key yourself, then make sure every tool call uses the right account. | Users complete the hosted ClawLink setup once and the connected Woodpecker Co account becomes available to the agent without you building credential management. |
| Ongoing maintenance | You own refresh logic, permission debugging, environment config, and every provider-specific edge case for Woodpecker Co. | ClawLink handles the repetitive integration plumbing so your team can focus on the workflow instead of the infrastructure. |
| Agent usability | You still need to expose the right Woodpecker Co actions to the runtime in a format your agent can reliably use. | 8 tools for Woodpecker Co are already exposed through ClawLink, so the agent can read and act from chat immediately. |
ClawLink vs. Composio
Composio also exposes Woodpecker Co to AI agents. It is developer infrastructure: Python and TypeScript SDKs, an MCP server, and a catalog past 1,000 apps, aimed at teams shipping agent products. ClawLink is built for OpenClaw users instead. You install the plugin once, connect Woodpecker Co in the browser, and the 8 tools above work from chat. There is no SDK and no config file, and the Woodpecker Co key you paste at setup is stored server-side rather than kept in your environment. Choosing between them? Read the full Composio alternatives comparison.
Troubleshooting
OpenClaw installed the Woodpecker Co skill but can't call the tools
The ClawHub skill teaches OpenClaw about Woodpecker Co, but the calls run through the ClawLink plugin and your connected account. Make sure Woodpecker Co is connected in the dashboard, then start a fresh chat so OpenClaw reloads the tool catalog. If OpenClaw runs as a persistent gateway, restart it so the new tools register.
Connection succeeds but no tools appear
Reconnect Woodpecker Co from the dashboard, then start a fresh chat if the runtime still has the old tool catalog loaded.
"Tool schema not loaded yet" error when calling Woodpecker Co tools
Woodpecker Co tool schemas load on demand the first time a tool runs and are cached after that, so this error usually clears on its own: wait a few seconds and retry the same request. If every Woodpecker Co call keeps failing with it in a fresh chat, reconnect from the dashboard, and contact support if it still persists — that pattern points to a configuration problem on our side, not something you can fix by reconnecting again.
Woodpecker Co returns 403 or "permission denied" on one action while others work
Two usual causes. The connected account may not have access to the specific workspace, inbox, store, or project in the request — check that first. If access looks right, the agent may have sent a placeholder value (like "YOUR_ID" or an example id from documentation) instead of a real one: ask it to run a list or search tool first, then retry the action with a real id from those results. Most failures at this stage are one of these two, not ClawLink bugs.
API key setup works but results look incomplete
Double-check that the API key for Woodpecker Co has the right scopes or account access. A valid key can still be too limited for some reads or writes.
FAQ
Is there a OpenClaw Woodpecker Co integration?
Yes. ClawLink is the fastest way to connect OpenClaw to Woodpecker Co: link your Woodpecker Co account once in the browser and OpenClaw can call the Woodpecker Co API through 8 ready-made tools — no custom code or token handling.
How do I add Woodpecker Co to OpenClaw with ClawLink?
Paste the setup prompt from this page into OpenClaw. It installs the ClawLink Woodpecker Co skill from ClawHub, then you click Connect in the dashboard to authorize Woodpecker Co. OpenClaw calls the tools from the next message — no config files, and the Woodpecker Co key you paste is stored server-side instead of in your environment.
How long does it take to connect Woodpecker Co to OpenClaw?
About two minutes. Sign in, click Connect next to Woodpecker Co in the dashboard, authenticate, and OpenClaw can use it from the next chat message.
Why use ClawLink instead of wiring Woodpecker Co up myself?
The alternative to ClawLink is usually manual API key setup plus your own token handling, permission troubleshooting, and tool plumbing for OpenClaw. That is fine if you want to build and maintain the integration yourself. Most teams just want Woodpecker Co working from chat.
OpenClaw installed the Woodpecker Co skill but can't call the tools
The ClawHub skill teaches OpenClaw about Woodpecker Co, but the calls run through the ClawLink plugin and your connected account. Make sure Woodpecker Co is connected in the dashboard, then start a fresh chat so OpenClaw reloads the tool catalog. If OpenClaw runs as a persistent gateway, restart it so the new tools register.
Related
OpenClaw ActiveCampaign integration
Marketing automation, CRM, and email marketing
OpenClaw Benchmark Email integration
Benchmark Email is a comprehensive email marketing platform offering tools for creating, sending, and analyzing email campaigns.
Connect Mailchimp
Create email campaigns and manage audiences