How to connect Leexi to OpenClaw
Connect Leexi to OpenClaw with ClawLink: paste your Leexi key once and 9 tools work from chat. No MCP server to run, nothing stored on your machine.
LeexiAPI KEYMCPAI notetaker - Transcribe, analyse and summarize your calls and meetings.. Once connected, OpenClaw can read and act on Leexi from chat — pairing, token refresh, and tool wiring handled for you.
The usual route to Leexi access for OpenClaw is an MCP server you configure and keep running, plus your own OAuth app or API keys. ClawLink gives OpenClaw a more practical Leexi setup: install one ClawHub skill, connect Leexi in the browser, and OpenClaw can call real Leexi actions from any chat surface with no auth, token refresh, or tool wiring to build yourself.
Setup
It takes three steps to connect OpenClaw to Leexi.
1Install the plugin
Paste the setup prompt into OpenClaw, or install from the terminal and ask OpenClaw to pair:
openclaw plugins install clawhub:clawlink-plugin- 2
Connect Leexi
Paste your API key in the dashboard.
- 3
Use it from chat
Ask OpenClaw: "What can you do with Leexi?"
Install by command
The setup prompt above does all of this in one paste. By hand, it is one install command plus a browser approval:
openclaw plugins install clawhub:clawlink-pluginThen ask OpenClaw to set up ClawLink. It starts browser pairing and prints an approval link — open it, approve the device, return to the chat, and say done. Finally, connect Leexi in the ClawLink dashboard — paste your Leexi API key once.
Verify the connection by asking OpenClaw:
Pull the relevant data from Leexi, summarize it in plain English, and point out anything that needs attention.
Using a different agent?
The OpenClaw plugin is one client of ClawLink's MCP server. Claude Code, Cursor, Codex, or any agent that can run a shell command pairs with the same ClawLink account through the CLI:
npx -y @useclawlink/cli loginlogin opens the same browser approval and stores a credential locally. Once Leexi is connected in the dashboard, that agent calls the same 9 Leexi tools over MCP. Full setup for MCP clients and shell agents: connect apps to any AI agent.
Leexi MCP for OpenClaw
Looking for a Leexi MCP server for OpenClaw? ClawLink connects Leexi to OpenClaw and exposes 9 Leexi tools your agent can call over MCP, with hosted auth and nothing to run or maintain yourself. Using Hermes instead? The Hermes Leexi integration works the same way.
What the OpenClaw Leexi integration can do
9 Leexi tools are ready for OpenClaw once the account is connected. The 8 below are the ones people reach for most; your agent can call all 9.
8 of 9 Leexi tools for OpenClaw
| Tool | What it does |
|---|---|
Get call leexi_get_call | Get details of a specific call or meeting by UUID from Leexi |
Get meeting event leexi_get_meeting_event | Retrieve a specific meeting event by UUID from Leexi |
List calls leexi_list_calls | List all calls and meetings in your Leexi workspace with pagination support |
List meeting events leexi_list_meeting_events | List all meeting events in your Leexi workspace with pagination support |
List teams leexi_list_teams | List all teams in your Leexi workspace with pagination support |
List users leexi_list_users | List all users in your Leexi workspace |
Create meeting event leexi_create_meeting_event | Create a new meeting event in Leexi with timing, participants, and recording preferences |
Request presigned URL leexi_request_presigned_url | Request a presigned URL for uploading a call recording before creating the call |
Try it: find the Leexi tool you need
Browse the 8 Leexi tools
Click any tool to see exactly what OpenClaw can do and copy a ready-to-use prompt.
Example prompts
Pull the relevant data from Leexi, summarize it in plain English, and point out anything that needs attention.
Pull the relevant data from Leexi, summarize it in plain English, and point out anything that needs attention.
List the relevant items in Leexi, group them by priority, and recommend what OpenClaw should do next.
List the relevant items in Leexi, group them by priority, and recommend what OpenClaw should do next.
ClawLink vs. building it yourself
The alternative to ClawLink is usually manual API key setup plus your own token handling, permission troubleshooting, and tool plumbing for OpenClaw. That is fine if you want to build and maintain the integration yourself. Most teams just want Leexi working from chat.
| Manual | ClawLink | |
|---|---|---|
| Credential handling | Collect, validate, store, and rotate the Leexi API key yourself, then make sure every tool call uses the right account. | Users complete the hosted ClawLink setup once and the connected Leexi account becomes available to the agent without you building credential management. |
| Ongoing maintenance | You own refresh logic, permission debugging, environment config, and every provider-specific edge case for Leexi. | ClawLink handles the repetitive integration plumbing so your team can focus on the workflow instead of the infrastructure. |
| Agent usability | You still need to expose the right Leexi actions to the runtime in a format your agent can reliably use. | 9 tools for Leexi are already exposed through ClawLink, so the agent can read and act from chat immediately. |
ClawLink vs. Composio
Composio also exposes Leexi to AI agents. It is developer infrastructure: Python and TypeScript SDKs, an MCP server, and a catalog past 1,000 apps, aimed at teams shipping agent products. ClawLink is built for OpenClaw users instead. You install the plugin once, connect Leexi in the browser, and the 9 tools above work from chat. There is no SDK and no config file, and the Leexi key you paste at setup is stored server-side rather than kept in your environment. Choosing between them? Read the full Composio alternatives comparison.
Troubleshooting
OpenClaw installed the Leexi skill but can't call the tools
The ClawHub skill teaches OpenClaw about Leexi, but the calls run through the ClawLink plugin and your connected account. Make sure Leexi is connected in the dashboard, then start a fresh chat so OpenClaw reloads the tool catalog. If OpenClaw runs as a persistent gateway, restart it so the new tools register.
Connection succeeds but no tools appear
Reconnect Leexi from the dashboard, then start a fresh chat if the runtime still has the old tool catalog loaded.
"Tool schema not loaded yet" error when calling Leexi tools
Leexi tool schemas load on demand the first time a tool runs and are cached after that, so this error usually clears on its own: wait a few seconds and retry the same request. If every Leexi call keeps failing with it in a fresh chat, reconnect from the dashboard, and contact support if it still persists — that pattern points to a configuration problem on our side, not something you can fix by reconnecting again.
Leexi returns 403 or "permission denied" on one action while others work
Two usual causes. The connected account may not have access to the specific workspace, inbox, store, or project in the request — check that first. If access looks right, the agent may have sent a placeholder value (like "YOUR_ID" or an example id from documentation) instead of a real one: ask it to run a list or search tool first, then retry the action with a real id from those results. Most failures at this stage are one of these two, not ClawLink bugs.
API key setup works but results look incomplete
Double-check that the API key for Leexi has the right scopes or account access. A valid key can still be too limited for some reads or writes.
FAQ
Is there a OpenClaw Leexi integration?
Yes. ClawLink is the fastest way to connect OpenClaw to Leexi: link your Leexi account once in the browser and OpenClaw can call the Leexi API through 9 ready-made tools — no custom code or token handling.
How do I add Leexi to OpenClaw with ClawLink?
Paste the setup prompt from this page into OpenClaw. It installs the ClawLink Leexi skill from ClawHub, then you click Connect in the dashboard to authorize Leexi. OpenClaw calls the tools from the next message — no config files, and the Leexi key you paste is stored server-side instead of in your environment.
How long does it take to connect Leexi to OpenClaw?
About two minutes. Sign in, click Connect next to Leexi in the dashboard, authenticate, and OpenClaw can use it from the next chat message.
Why use ClawLink instead of wiring Leexi up myself?
The alternative to ClawLink is usually manual API key setup plus your own token handling, permission troubleshooting, and tool plumbing for OpenClaw. That is fine if you want to build and maintain the integration yourself. Most teams just want Leexi working from chat.
OpenClaw installed the Leexi skill but can't call the tools
The ClawHub skill teaches OpenClaw about Leexi, but the calls run through the ClawLink plugin and your connected account. Make sure Leexi is connected in the dashboard, then start a fresh chat so OpenClaw reloads the tool catalog. If OpenClaw runs as a persistent gateway, restart it so the new tools register.
Related
Connect DataRobot
DataRobot is a machine learning platform that automates model building, deployment, and monitoring, enabling organizations to derive predictive insights from large datasets.
Connect Chatbotkit
ChatBotKit is a platform that enables developers to build and manage AI-powered chatbots, offering comprehensive APIs and SDKs for seamless integration into applications.
Just One API
Just One API provides unified access to public social media, creator, entertainment, and ecommerce data across hundreds of metered endpoints.