How to connect Vectorshift to OpenClaw
Connect Vectorshift to OpenClaw with ClawLink: paste your Vectorshift key once and 11 tools work from chat. No MCP server to run, nothing stored on your machine.
VectorshiftAPI KEYMCPThe End-to-End AI Automations Platform for building and deploying AI workflows, pipelines, chatbots, and knowledge bases.. Once connected, OpenClaw can read and act on Vectorshift from chat — pairing, token refresh, and tool wiring handled for you.
The usual route to Vectorshift access for OpenClaw is an MCP server you configure and keep running, plus your own OAuth app or API keys. ClawLink gives OpenClaw a more practical Vectorshift setup: install one ClawHub skill, connect Vectorshift in the browser, and OpenClaw can call real Vectorshift actions from any chat surface with no auth, token refresh, or tool wiring to build yourself.
Setup
It takes three steps to connect OpenClaw to Vectorshift.
1Install the plugin
Paste the setup prompt into OpenClaw, or install from the terminal and ask OpenClaw to pair:
openclaw plugins install clawhub:clawlink-plugin- 2
Connect Vectorshift
Paste your API key in the dashboard.
- 3
Use it from chat
Ask OpenClaw: "What can you do with Vectorshift?"
Install by command
The setup prompt above does all of this in one paste. By hand, it is one install command plus a browser approval:
openclaw plugins install clawhub:clawlink-pluginThen ask OpenClaw to set up ClawLink. It starts browser pairing and prints an approval link — open it, approve the device, return to the chat, and say done. Finally, connect Vectorshift in the ClawLink dashboard — paste your Vectorshift API key once.
Verify the connection by asking OpenClaw:
Pull the relevant data from Vectorshift, summarize it in plain English, and point out anything that needs attention.
Using a different agent?
The OpenClaw plugin is one client of ClawLink's MCP server. Claude Code, Cursor, Codex, or any agent that can run a shell command pairs with the same ClawLink account through the CLI:
npx -y @useclawlink/cli loginlogin opens the same browser approval and stores a credential locally. Once Vectorshift is connected in the dashboard, that agent calls the same 11 Vectorshift tools over MCP. Full setup for MCP clients and shell agents: connect apps to any AI agent.
Vectorshift MCP for OpenClaw
Looking for a Vectorshift MCP server for OpenClaw? ClawLink connects Vectorshift to OpenClaw and exposes 11 Vectorshift tools your agent can call over MCP, with hosted auth and nothing to run or maintain yourself. Using Hermes instead? The Hermes Vectorshift integration works the same way.
What the OpenClaw Vectorshift integration can do
11 Vectorshift tools are ready for OpenClaw once the account is connected. The 10 below are the ones people reach for most; your agent can call all 11.
10 of 11 Vectorshift tools for OpenClaw
| Tool | What it does |
|---|---|
Get chatbot vectorshift_get_chatbot | Fetch an existing chatbot by its ID or name |
Get knowledge base vectorshift_get_knowledge_base | Fetch an existing knowledge base by its ID or name |
Get pipeline vectorshift_get_pipeline | Fetch an existing pipeline by its ID or name |
List chatbots vectorshift_list_chatbots | List all available chatbots in the account |
List pipelines vectorshift_list_pipelines | List all available pipelines in the VectorShift account |
List transformations vectorshift_list_transformations | List all available transformations in the account |
Create chatbot vectorshift_create_chatbot | Create a new chatbot |
Run pipeline vectorshift_run_pipeline | Run a VectorShift pipeline with the given inputs |
Run pipeline bulk vectorshift_run_pipeline_bulk | Run a VectorShift pipeline in bulk with multiple sets of inputs |
Terminate pipeline vectorshift_terminate_pipeline | Terminate a running pipeline execution |
Try it: find the Vectorshift tool you need
Browse the 10 Vectorshift tools
Click any tool to see exactly what OpenClaw can do and copy a ready-to-use prompt.
Example prompts
Pull the relevant data from Vectorshift, summarize it in plain English, and point out anything that needs attention.
Pull the relevant data from Vectorshift, summarize it in plain English, and point out anything that needs attention.
Pull the relevant data from Vectorshift, summarize it in plain English, and point out anything that needs attention.
List the relevant items in Vectorshift, group them by priority, and recommend what OpenClaw should do next.
ClawLink vs. building it yourself
The alternative to ClawLink is usually manual API key setup plus your own token handling, permission troubleshooting, and tool plumbing for OpenClaw. That is fine if you want to build and maintain the integration yourself. Most teams just want Vectorshift working from chat.
| Manual | ClawLink | |
|---|---|---|
| Credential handling | Collect, validate, store, and rotate the Vectorshift API key yourself, then make sure every tool call uses the right account. | Users complete the hosted ClawLink setup once and the connected Vectorshift account becomes available to the agent without you building credential management. |
| Ongoing maintenance | You own refresh logic, permission debugging, environment config, and every provider-specific edge case for Vectorshift. | ClawLink handles the repetitive integration plumbing so your team can focus on the workflow instead of the infrastructure. |
| Agent usability | You still need to expose the right Vectorshift actions to the runtime in a format your agent can reliably use. | 11 tools for Vectorshift are already exposed through ClawLink, so the agent can read and act from chat immediately. |
ClawLink vs. Composio
Composio also exposes Vectorshift to AI agents. It is developer infrastructure: Python and TypeScript SDKs, an MCP server, and a catalog past 1,000 apps, aimed at teams shipping agent products. ClawLink is built for OpenClaw users instead. You install the plugin once, connect Vectorshift in the browser, and the 11 tools above work from chat. There is no SDK and no config file, and the Vectorshift key you paste at setup is stored server-side rather than kept in your environment. Choosing between them? Read the full Composio alternatives comparison.
Troubleshooting
OpenClaw installed the Vectorshift skill but can't call the tools
The ClawHub skill teaches OpenClaw about Vectorshift, but the calls run through the ClawLink plugin and your connected account. Make sure Vectorshift is connected in the dashboard, then start a fresh chat so OpenClaw reloads the tool catalog. If OpenClaw runs as a persistent gateway, restart it so the new tools register.
Connection succeeds but no tools appear
Reconnect Vectorshift from the dashboard, then start a fresh chat if the runtime still has the old tool catalog loaded.
"Tool schema not loaded yet" error when calling Vectorshift tools
Vectorshift tool schemas load on demand the first time a tool runs and are cached after that, so this error usually clears on its own: wait a few seconds and retry the same request. If every Vectorshift call keeps failing with it in a fresh chat, reconnect from the dashboard, and contact support if it still persists — that pattern points to a configuration problem on our side, not something you can fix by reconnecting again.
Vectorshift returns 403 or "permission denied" on one action while others work
Two usual causes. The connected account may not have access to the specific workspace, inbox, store, or project in the request — check that first. If access looks right, the agent may have sent a placeholder value (like "YOUR_ID" or an example id from documentation) instead of a real one: ask it to run a list or search tool first, then retry the action with a real id from those results. Most failures at this stage are one of these two, not ClawLink bugs.
API key setup works but results look incomplete
Double-check that the API key for Vectorshift has the right scopes or account access. A valid key can still be too limited for some reads or writes.
FAQ
Is there a OpenClaw Vectorshift integration?
Yes. ClawLink is the fastest way to connect OpenClaw to Vectorshift: link your Vectorshift account once in the browser and OpenClaw can call the Vectorshift API through 11 ready-made tools — no custom code or token handling.
How do I add Vectorshift to OpenClaw with ClawLink?
Paste the setup prompt from this page into OpenClaw. It installs the ClawLink Vectorshift skill from ClawHub, then you click Connect in the dashboard to authorize Vectorshift. OpenClaw calls the tools from the next message — no config files, and the Vectorshift key you paste is stored server-side instead of in your environment.
How long does it take to connect Vectorshift to OpenClaw?
About two minutes. Sign in, click Connect next to Vectorshift in the dashboard, authenticate, and OpenClaw can use it from the next chat message.
Why use ClawLink instead of wiring Vectorshift up myself?
The alternative to ClawLink is usually manual API key setup plus your own token handling, permission troubleshooting, and tool plumbing for OpenClaw. That is fine if you want to build and maintain the integration yourself. Most teams just want Vectorshift working from chat.
OpenClaw installed the Vectorshift skill but can't call the tools
The ClawHub skill teaches OpenClaw about Vectorshift, but the calls run through the ClawLink plugin and your connected account. Make sure Vectorshift is connected in the dashboard, then start a fresh chat so OpenClaw reloads the tool catalog. If OpenClaw runs as a persistent gateway, restart it so the new tools register.
Related
OpenClaw DataRobot integration
DataRobot is a machine learning platform that automates model building, deployment, and monitoring, enabling organizations to derive predictive insights from large datasets.
Chatbotkit
ChatBotKit is a platform that enables developers to build and manage AI-powered chatbots, offering comprehensive APIs and SDKs for seamless integration into applications.
Just One API tools
Just One API provides unified access to public social media, creator, entertainment, and ecommerce data across hundreds of metered endpoints.