How to connect Zep to OpenClaw
Connect Zep to OpenClaw with ClawLink: paste your Zep key once and 41 tools work from chat. No MCP server to run, nothing stored on your machine.
ZepAPI KEYMCPThe Foundational Memory Layer for AI.. Once connected, OpenClaw can read and act on Zep from chat — pairing, token refresh, and tool wiring handled for you.
The usual route to Zep access for OpenClaw is an MCP server you configure and keep running, plus your own OAuth app or API keys. ClawLink gives OpenClaw a more practical Zep setup: install one ClawHub skill, connect Zep in the browser, and OpenClaw can call real Zep actions from any chat surface with no auth, token refresh, or tool wiring to build yourself.
Setup
It takes three steps to connect OpenClaw to Zep.
1Install the plugin
Paste the setup prompt into OpenClaw, or install from the terminal and ask OpenClaw to pair:
openclaw plugins install clawhub:clawlink-plugin- 2
Connect Zep
Paste your API key in the dashboard.
- 3
Use it from chat
Ask OpenClaw: "What can you do with Zep?"
Install by command
The setup prompt above does all of this in one paste. By hand, it is one install command plus a browser approval:
openclaw plugins install clawhub:clawlink-pluginThen ask OpenClaw to set up ClawLink. It starts browser pairing and prints an approval link — open it, approve the device, return to the chat, and say done. Finally, connect Zep in the ClawLink dashboard — paste your Zep API key once.
Verify the connection by asking OpenClaw:
Pull the relevant data from Zep, summarize it in plain English, and point out anything that needs attention.
Using a different agent?
The OpenClaw plugin is one client of ClawLink's MCP server. Claude Code, Cursor, Codex, or any agent that can run a shell command pairs with the same ClawLink account through the CLI:
npx -y @useclawlink/cli loginlogin opens the same browser approval and stores a credential locally. Once Zep is connected in the dashboard, that agent calls the same 41 Zep tools over MCP. Full setup for MCP clients and shell agents: connect apps to any AI agent.
Zep MCP for OpenClaw
Looking for a Zep MCP server for OpenClaw? ClawLink connects Zep to OpenClaw and exposes 41 Zep tools your agent can call over MCP, with hosted auth and nothing to run or maintain yourself. Using Hermes instead? The Hermes Zep integration works the same way.
What the OpenClaw Zep integration can do
41 Zep tools are ready for OpenClaw once the account is connected. The 30 below are the ones people reach for most; your agent can call all 41.
30 of 41 Zep tools for OpenClaw
| Tool | What it does |
|---|---|
Get edge zep_get_edge | Retrieve a specific edge by its UUID from the Zep knowledge graph |
Get graph by ID zep_get_graph_by_id | Retrieve a graph by its unique identifier from Zep |
Get group zep_get_group | Retrieve a group by ID from Zep |
Get node edges zep_get_node_edges | Retrieve all entity edges for a specific node in the Zep knowledge graph |
Get project info zep_get_project_info | Retrieve project information based on the provided API key |
Get session zep_get_session | Retrieve a session by its unique identifier from Zep |
Get session memory zep_get_session_memory | Retrieve memory for a given session including relevant facts and entities |
Get session message zep_get_session_message | Retrieve a specific message by UUID from a Zep session |
Get session messages zep_get_session_messages | Retrieve messages for a given session from Zep |
Get task status zep_get_task_status | Check the status of asynchronous operations in Zep |
Get thread messages zep_get_thread_messages | Retrieve conversation history for a specific thread from Zep |
Get thread user context zep_get_thread_user_context | Retrieve the most relevant user context from the user graph based on thread messages |
Get user zep_get_user | Retrieve a user by their user ID from Zep |
Get user node zep_get_user_node | Retrieve a user's graph node and summary from Zep |
Get user nodes zep_get_user_nodes | Retrieve all nodes for a specific user from their graph in Zep |
Get user sessions zep_get_user_sessions | Retrieve all sessions for a user from Zep |
Get user threads zep_get_user_threads | Retrieve all threads for a specific user from Zep |
Graph search zep_graph_search | Perform hybrid graph search combining semantic similarity and BM25 full-text search across the |
List groups ordered zep_list_groups_ordered | Retrieve all groups from Zep with pagination support |
List sessions ordered zep_list_sessions_ordered | Retrieve all sessions from Zep with pagination and ordering support |
List threads zep_list_threads | Retrieve all threads from Zep with pagination support |
List users ordered zep_list_users_ordered | Retrieve all users from Zep with pagination support |
Add fact triple zep_add_fact_triple | Add a manually specified fact triple (subject-predicate-object) to the Zep knowledge graph |
Add session memory zep_add_session_memory | Add memory messages to a specified Zep session |
Add thread messages zep_add_thread_messages | Add chat messages to a thread in Zep and ingest them into the user knowledge graph |
Clone graph zep_clone_graph | Clone a user or group graph with new identifiers in Zep |
Create graph zep_create_graph | Create a new graph by adding data to Zep |
Create group zep_create_group | Create a new group in Zep for multi-user graph management |
Create session zep_create_session | Create a new session in Zep for storing conversation memory |
Create thread zep_create_thread | Create a new thread in Zep for a specific user |
Try it: find the Zep tool you need
Browse the 30 Zep tools
Click any tool to see exactly what OpenClaw can do and copy a ready-to-use prompt.
Example prompts
Pull the relevant data from Zep, summarize it in plain English, and point out anything that needs attention.
Pull the relevant data from Zep, summarize it in plain English, and point out anything that needs attention.
Pull the relevant data from Zep, summarize it in plain English, and point out anything that needs attention.
Pull the relevant data from Zep, summarize it in plain English, and point out anything that needs attention.
ClawLink vs. building it yourself
The alternative to ClawLink is usually manual API key setup plus your own token handling, permission troubleshooting, and tool plumbing for OpenClaw. That is fine if you want to build and maintain the integration yourself. Most teams just want Zep working from chat.
| Manual | ClawLink | |
|---|---|---|
| Credential handling | Collect, validate, store, and rotate the Zep API key yourself, then make sure every tool call uses the right account. | Users complete the hosted ClawLink setup once and the connected Zep account becomes available to the agent without you building credential management. |
| Ongoing maintenance | You own refresh logic, permission debugging, environment config, and every provider-specific edge case for Zep. | ClawLink handles the repetitive integration plumbing so your team can focus on the workflow instead of the infrastructure. |
| Agent usability | You still need to expose the right Zep actions to the runtime in a format your agent can reliably use. | 41 tools for Zep are already exposed through ClawLink, so the agent can read and act from chat immediately. |
ClawLink vs. Composio
Composio also exposes Zep to AI agents. It is developer infrastructure: Python and TypeScript SDKs, an MCP server, and a catalog past 1,000 apps, aimed at teams shipping agent products. ClawLink is built for OpenClaw users instead. You install the plugin once, connect Zep in the browser, and the 41 tools above work from chat. There is no SDK and no config file, and the Zep key you paste at setup is stored server-side rather than kept in your environment. Choosing between them? Read the full Composio alternatives comparison.
Troubleshooting
OpenClaw installed the Zep skill but can't call the tools
The ClawHub skill teaches OpenClaw about Zep, but the calls run through the ClawLink plugin and your connected account. Make sure Zep is connected in the dashboard, then start a fresh chat so OpenClaw reloads the tool catalog. If OpenClaw runs as a persistent gateway, restart it so the new tools register.
Connection succeeds but no tools appear
Reconnect Zep from the dashboard, then start a fresh chat if the runtime still has the old tool catalog loaded.
"Tool schema not loaded yet" error when calling Zep tools
Zep tool schemas load on demand the first time a tool runs and are cached after that, so this error usually clears on its own: wait a few seconds and retry the same request. If every Zep call keeps failing with it in a fresh chat, reconnect from the dashboard, and contact support if it still persists — that pattern points to a configuration problem on our side, not something you can fix by reconnecting again.
Zep returns 403 or "permission denied" on one action while others work
Two usual causes. The connected account may not have access to the specific workspace, inbox, store, or project in the request — check that first. If access looks right, the agent may have sent a placeholder value (like "YOUR_ID" or an example id from documentation) instead of a real one: ask it to run a list or search tool first, then retry the action with a real id from those results. Most failures at this stage are one of these two, not ClawLink bugs.
API key setup works but results look incomplete
Double-check that the API key for Zep has the right scopes or account access. A valid key can still be too limited for some reads or writes.
FAQ
Is there a OpenClaw Zep integration?
Yes. ClawLink is the fastest way to connect OpenClaw to Zep: link your Zep account once in the browser and OpenClaw can call the Zep API through 41 ready-made tools — no custom code or token handling.
How do I add Zep to OpenClaw with ClawLink?
Paste the setup prompt from this page into OpenClaw. It installs the ClawLink Zep skill from ClawHub, then you click Connect in the dashboard to authorize Zep. OpenClaw calls the tools from the next message — no config files, and the Zep key you paste is stored server-side instead of in your environment.
How long does it take to connect Zep to OpenClaw?
About two minutes. Sign in, click Connect next to Zep in the dashboard, authenticate, and OpenClaw can use it from the next chat message.
Why use ClawLink instead of wiring Zep up myself?
The alternative to ClawLink is usually manual API key setup plus your own token handling, permission troubleshooting, and tool plumbing for OpenClaw. That is fine if you want to build and maintain the integration yourself. Most teams just want Zep working from chat.
OpenClaw installed the Zep skill but can't call the tools
The ClawHub skill teaches OpenClaw about Zep, but the calls run through the ClawLink plugin and your connected account. Make sure Zep is connected in the dashboard, then start a fresh chat so OpenClaw reloads the tool catalog. If OpenClaw runs as a persistent gateway, restart it so the new tools register.
Related
Connect DataRobot
DataRobot is a machine learning platform that automates model building, deployment, and monitoring, enabling organizations to derive predictive insights from large datasets.
OpenClaw Chatbotkit integration
ChatBotKit is a platform that enables developers to build and manage AI-powered chatbots, offering comprehensive APIs and SDKs for seamless integration into applications.
Just One API
Just One API provides unified access to public social media, creator, entertainment, and ecommerce data across hundreds of metered endpoints.