How to connect Y gy to OpenClaw
Connect Y gy to OpenClaw with ClawLink: paste your Y gy key once and 8 tools work from chat. No MCP server to run, nothing stored on your machine.
Y gyAPI KEYMCPy.gy is a URL shortener and QR code generator that allows users to create short, memorable links from long URLs, customize them with unique endings, and integrate with an API for programmatic link creation.. Once connected, OpenClaw can read and act on Y gy from chat — pairing, token refresh, and tool wiring handled for you.
The usual route to Y gy access for OpenClaw is an MCP server you configure and keep running, plus your own OAuth app or API keys. ClawLink gives OpenClaw a more practical Y gy setup: install one ClawHub skill, connect Y gy in the browser, and OpenClaw can call real Y gy actions from any chat surface with no auth, token refresh, or tool wiring to build yourself.
Setup
It takes three steps to connect OpenClaw to Y gy.
1Install the plugin
Paste the setup prompt into OpenClaw, or install from the terminal and ask OpenClaw to pair:
openclaw plugins install clawhub:clawlink-plugin- 2
Connect Y gy
Paste your API key in the dashboard.
- 3
Use it from chat
Ask OpenClaw: "What can you do with Y gy?"
Install by command
The setup prompt above does all of this in one paste. By hand, it is one install command plus a browser approval:
openclaw plugins install clawhub:clawlink-pluginThen ask OpenClaw to set up ClawLink. It starts browser pairing and prints an approval link — open it, approve the device, return to the chat, and say done. Finally, connect Y gy in the ClawLink dashboard — paste your Y gy API key once.
Verify the connection by asking OpenClaw:
Pull the relevant data from Y gy, summarize it in plain English, and point out anything that needs attention.
Using a different agent?
The OpenClaw plugin is one client of ClawLink's MCP server. Claude Code, Cursor, Codex, or any agent that can run a shell command pairs with the same ClawLink account through the CLI:
npx -y @useclawlink/cli loginlogin opens the same browser approval and stores a credential locally. Once Y gy is connected in the dashboard, that agent calls the same 8 Y gy tools over MCP. Full setup for MCP clients and shell agents: connect apps to any AI agent.
Y gy MCP for OpenClaw
Looking for a Y gy MCP server for OpenClaw? ClawLink connects Y gy to OpenClaw and exposes 8 Y gy tools your agent can call over MCP, with hosted auth and nothing to run or maintain yourself. Using Hermes instead? The Hermes Y gy integration works the same way.
What the OpenClaw Y gy integration can do
8 Y gy tools are ready for OpenClaw once the account is connected. The 6 below are the ones people reach for most; your agent can call all 8.
6 of 8 Y gy tools for OpenClaw
| Tool | What it does |
|---|---|
Get all links y_gy_get_all_links | Fetch all short links with optional pagination |
Get all tags y_gy_get_all_tags | Retrieve all tags associated with the organization |
Get link y_gy_get_link | Retrieve a specific short link by its ID |
Create link y_gy_create_link | Create a comprehensive Y.gy shortened link with advanced features |
Create tag y_gy_create_tag | Create a new tag |
Register user y_gy_register_user | Register a new user account |
Try it: find the Y gy tool you need
Browse the 6 Y gy tools
Click any tool to see exactly what OpenClaw can do and copy a ready-to-use prompt.
Example prompts
Pull the relevant data from Y gy, summarize it in plain English, and point out anything that needs attention.
Pull the relevant data from Y gy, summarize it in plain English, and point out anything that needs attention.
Create it in Y gy for me, then confirm the important fields before you finish.
ClawLink vs. building it yourself
The alternative to ClawLink is usually manual API key setup plus your own token handling, permission troubleshooting, and tool plumbing for OpenClaw. That is fine if you want to build and maintain the integration yourself. Most teams just want Y gy working from chat.
| Manual | ClawLink | |
|---|---|---|
| Credential handling | Collect, validate, store, and rotate the Y gy API key yourself, then make sure every tool call uses the right account. | Users complete the hosted ClawLink setup once and the connected Y gy account becomes available to the agent without you building credential management. |
| Ongoing maintenance | You own refresh logic, permission debugging, environment config, and every provider-specific edge case for Y gy. | ClawLink handles the repetitive integration plumbing so your team can focus on the workflow instead of the infrastructure. |
| Agent usability | You still need to expose the right Y gy actions to the runtime in a format your agent can reliably use. | 8 tools for Y gy are already exposed through ClawLink, so the agent can read and act from chat immediately. |
ClawLink vs. Composio
Composio also exposes Y gy to AI agents. It is developer infrastructure: Python and TypeScript SDKs, an MCP server, and a catalog past 1,000 apps, aimed at teams shipping agent products. ClawLink is built for OpenClaw users instead. You install the plugin once, connect Y gy in the browser, and the 8 tools above work from chat. There is no SDK and no config file, and the Y gy key you paste at setup is stored server-side rather than kept in your environment. Choosing between them? Read the full Composio alternatives comparison.
Troubleshooting
OpenClaw installed the Y gy skill but can't call the tools
The ClawHub skill teaches OpenClaw about Y gy, but the calls run through the ClawLink plugin and your connected account. Make sure Y gy is connected in the dashboard, then start a fresh chat so OpenClaw reloads the tool catalog. If OpenClaw runs as a persistent gateway, restart it so the new tools register.
Connection succeeds but no tools appear
Reconnect Y gy from the dashboard, then start a fresh chat if the runtime still has the old tool catalog loaded.
"Tool schema not loaded yet" error when calling Y gy tools
Y gy tool schemas load on demand the first time a tool runs and are cached after that, so this error usually clears on its own: wait a few seconds and retry the same request. If every Y gy call keeps failing with it in a fresh chat, reconnect from the dashboard, and contact support if it still persists — that pattern points to a configuration problem on our side, not something you can fix by reconnecting again.
Y gy returns 403 or "permission denied" on one action while others work
Two usual causes. The connected account may not have access to the specific workspace, inbox, store, or project in the request — check that first. If access looks right, the agent may have sent a placeholder value (like "YOUR_ID" or an example id from documentation) instead of a real one: ask it to run a list or search tool first, then retry the action with a real id from those results. Most failures at this stage are one of these two, not ClawLink bugs.
API key setup works but results look incomplete
Double-check that the API key for Y gy has the right scopes or account access. A valid key can still be too limited for some reads or writes.
FAQ
Is there a OpenClaw Y gy integration?
Yes. ClawLink is the fastest way to connect OpenClaw to Y gy: link your Y gy account once in the browser and OpenClaw can call the Y gy API through 8 ready-made tools — no custom code or token handling.
How do I add Y gy to OpenClaw with ClawLink?
Paste the setup prompt from this page into OpenClaw. It installs the ClawLink Y gy skill from ClawHub, then you click Connect in the dashboard to authorize Y gy. OpenClaw calls the tools from the next message — no config files, and the Y gy key you paste is stored server-side instead of in your environment.
How long does it take to connect Y gy to OpenClaw?
About two minutes. Sign in, click Connect next to Y gy in the dashboard, authenticate, and OpenClaw can use it from the next chat message.
Why use ClawLink instead of wiring Y gy up myself?
The alternative to ClawLink is usually manual API key setup plus your own token handling, permission troubleshooting, and tool plumbing for OpenClaw. That is fine if you want to build and maintain the integration yourself. Most teams just want Y gy working from chat.
OpenClaw installed the Y gy skill but can't call the tools
The ClawHub skill teaches OpenClaw about Y gy, but the calls run through the ClawLink plugin and your connected account. Make sure Y gy is connected in the dashboard, then start a fresh chat so OpenClaw reloads the tool catalog. If OpenClaw runs as a persistent gateway, restart it so the new tools register.
