How to connect Bolt Iot to Hermes Agent (paste one key, 6 tools)

Most guides for giving Hermes Agent Bolt Iot access start with registering your own OAuth app or pasting API keys into env files, then leave the token refresh and tool wiring to you. ClawLink gives Hermes a more practical Bolt Iot setup: pair once in the browser and your always-on Hermes agent can act on Bolt Iot for you, reading and doing real work on your behalf with no auth, token refresh, or tool wiring to build yourself.

Setup

It takes three steps to connect Hermes to Bolt Iot.

1
Install and pair
Install the ClawLink plugin, then pair Hermes with a one-time browser approval:
hermes plugins install ClawLink-HQ/hermes-plugin --enable
2
Connect Bolt Iot
Paste your API key in the dashboard.
3
Use it from chat
Ask Hermes Agent: "What can you do with Bolt Iot?"

Install by command

The prompt above walks Hermes through this. By hand, it is four commands and a browser approval:

hermes plugins install ClawLink-HQ/hermes-plugin --enable
hermes clawlink begin    # prints an approval link — open it and approve
hermes clawlink finish   # after approving in the browser
hermes clawlink test

Then connect Bolt Iot in the ClawLink dashboard — paste your Bolt Iot API key once.

Verify the connection by asking Hermes:

Use Bolt Iot to analog read and walk me through the result in plain English.

Using a different agent?

The Hermes plugin is one client of ClawLink's MCP server. Claude Code, Cursor, Codex, or any agent that can run a shell command pairs with the same ClawLink account through the CLI:

npx -y @useclawlink/cli login

login opens the same browser approval and stores a credential locally. Once Bolt Iot is connected in the dashboard, that agent calls the same 6 Bolt Iot tools over MCP. Full setup for MCP clients and shell agents: connect apps to any AI agent.

Bolt Iot MCP for Hermes

Looking for a Bolt Iot MCP server for Hermes Agent? ClawLink connects Bolt Iot to Hermes Agent and exposes 6 Bolt Iot tools your agent can call over MCP, with hosted auth and nothing to run or maintain yourself. Using OpenClaw instead? The OpenClaw Bolt Iot integration works the same way.

What the Hermes Agent Bolt Iot integration can do

6 Bolt Iot tools are ready for Hermes Agent once the account is connected.

All 6 Bolt Iot tools for Hermes

Tool	What it does
Analog read `bolt_iot_analog_read`	Read the analog value from a specified pin on a Bolt device
Check device status `bolt_iot_check_device_status`	Check whether a specified Bolt device is online
Serial read `bolt_iot_serial_read`	Read incoming serial data from a Bolt device
Digital write `bolt_iot_digital_write`	Set a digital pin HIGH or LOW on a specified Bolt device
Serial write `bolt_iot_serial_write`	Send serial data to a Bolt device
Serial write read `bolt_iot_serial_write_read`	Send serial data and read the response on a Bolt device

Try it: find the Bolt Iot tool you need

Browse the 6 Bolt Iot tools

Click any tool to see exactly what Hermes can do and copy a ready-to-use prompt.

Example prompts

Use Bolt Iot to analog read and walk me through the result in plain English.

Use Bolt Iot to check device status and walk me through the result in plain English.

Use Bolt Iot to serial read and walk me through the result in plain English.

Use Bolt Iot to digital write and walk me through the result in plain English.

ClawLink vs. building it yourself

The alternative to ClawLink is usually manual API key setup plus your own token handling, permission troubleshooting, and tool plumbing for Hermes Agent. That is fine if you want to build and maintain the integration yourself. Most teams just want Bolt Iot working from chat.

	Manual	ClawLink
Credential handling	Collect, validate, store, and rotate the Bolt Iot API key yourself, then make sure every tool call uses the right account.	Users complete the hosted ClawLink setup once and the connected Bolt Iot account becomes available to the agent without you building credential management.
Ongoing maintenance	You own refresh logic, permission debugging, environment config, and every provider-specific edge case for Bolt Iot.	ClawLink handles the repetitive integration plumbing so your team can focus on the workflow instead of the infrastructure.
Agent usability	You still need to expose the right Bolt Iot actions to the runtime in a format your agent can reliably use.	6 tools for Bolt Iot are already exposed through ClawLink, so the agent can read and act from chat immediately.

ClawLink vs. Composio

Composio also exposes Bolt Iot to AI agents. It is developer infrastructure: Python and TypeScript SDKs, an MCP server, and a catalog past 1,000 apps, aimed at teams shipping agent products. ClawLink is built for Hermes Agent users instead. You install the plugin once, connect Bolt Iot in the browser, and the 6 tools above work from chat. There is no SDK and no config file, and the Bolt Iot key you paste at setup is stored server-side rather than kept in your environment. Choosing between them? Read the full Composio alternatives comparison.

Troubleshooting

Hermes paired but still can't use Bolt Iot

Pairing is a two-step handshake: run hermes clawlink begin, approve the link in your browser, then run hermes clawlink finish. If you ran finish before approving, or the approval link expired, run hermes clawlink begin again to get a fresh link. Confirm the plugin was installed with --enable, then verify with hermes clawlink test.

Connection succeeds but no tools appear

Reconnect Bolt Iot from the dashboard, then start a fresh chat if the runtime still has the old tool catalog loaded.

"Tool schema not loaded yet" error when calling Bolt Iot tools

Bolt Iot tool schemas load on demand the first time a tool runs and are cached after that, so this error usually clears on its own: wait a few seconds and retry the same request. If every Bolt Iot call keeps failing with it in a fresh chat, reconnect from the dashboard, and contact support if it still persists — that pattern points to a configuration problem on our side, not something you can fix by reconnecting again.

Bolt Iot returns 403 or "permission denied" on one action while others work

Two usual causes. The connected account may not have access to the specific workspace, inbox, store, or project in the request — check that first. If access looks right, the agent may have sent a placeholder value (like "YOUR_ID" or an example id from documentation) instead of a real one: ask it to run a list or search tool first, then retry the action with a real id from those results. Most failures at this stage are one of these two, not ClawLink bugs.

API key setup works but results look incomplete

Double-check that the API key for Bolt Iot has the right scopes or account access. A valid key can still be too limited for some reads or writes.

FAQ

Is there a Hermes Agent Bolt Iot integration?

Yes. ClawLink is the fastest way to connect Hermes to Bolt Iot: link your Bolt Iot account once in the browser and Hermes Agent can call the Bolt Iot API through 6 ready-made tools — no custom code or token handling.

How do I connect Bolt Iot to Hermes with ClawLink?

Install the plugin with hermes plugins install ClawLink-HQ/hermes-plugin --enable, then pair once: run hermes clawlink begin, approve the link in your browser, and run hermes clawlink finish. Connect Bolt Iot in the dashboard and Hermes can use it from the next message — no config files, and the Bolt Iot key you paste is stored server-side instead of in your environment.

How long does it take to connect Bolt Iot to Hermes Agent?

About two minutes. Sign in, click Connect next to Bolt Iot in the dashboard, authenticate, and Hermes Agent can use it from the next chat message.

Why use ClawLink instead of wiring Bolt Iot up myself?

Hermes paired but still can't use Bolt Iot

How to connect Bolt Iot to Hermes Agent

Setup

Install and pair

Connect Bolt Iot

Use it from chat