How to connect AbuseIPDB to OpenClaw
Connect AbuseIPDB to OpenClaw with ClawLink: paste your AbuseIPDB key once and 6 tools work from chat. No MCP server to run, nothing stored on your machine.
AbuseIPDBAPI KEYMCPAbuseIPDB is a project dedicated to helping make the internet safer by providing a central repository for reporting and checking IP addresses associated with malicious activities.. Once connected, OpenClaw can read and act on AbuseIPDB from chat — pairing, token refresh, and tool wiring handled for you.
The usual route to AbuseIPDB access for OpenClaw is an MCP server you configure and keep running, plus your own OAuth app or API keys. ClawLink gives OpenClaw a more practical AbuseIPDB setup: install one ClawHub skill, connect AbuseIPDB in the browser, and OpenClaw can call real AbuseIPDB actions from any chat surface with no auth, token refresh, or tool wiring to build yourself.
Setup
It takes three steps to connect OpenClaw to AbuseIPDB.
1Install the plugin
Paste the setup prompt into OpenClaw, or install from the terminal and ask OpenClaw to pair:
openclaw plugins install clawhub:clawlink-plugin- 2
Connect AbuseIPDB
Paste your API key in the dashboard.
- 3
Use it from chat
Ask OpenClaw: "What can you do with AbuseIPDB?"
Install by command
The setup prompt above does all of this in one paste. By hand, it is one install command plus a browser approval:
openclaw plugins install clawhub:clawlink-pluginThen ask OpenClaw to set up ClawLink. It starts browser pairing and prints an approval link — open it, approve the device, return to the chat, and say done. Finally, connect AbuseIPDB in the ClawLink dashboard — paste your AbuseIPDB API key once.
Verify the connection by asking OpenClaw:
Use AbuseIPDB to blacklist and walk me through the result in plain English.
Using a different agent?
The OpenClaw plugin is one client of ClawLink's MCP server. Claude Code, Cursor, Codex, or any agent that can run a shell command pairs with the same ClawLink account through the CLI:
npx -y @useclawlink/cli loginlogin opens the same browser approval and stores a credential locally. Once AbuseIPDB is connected in the dashboard, that agent calls the same 6 AbuseIPDB tools over MCP. Full setup for MCP clients and shell agents: connect apps to any AI agent.
AbuseIPDB MCP for OpenClaw
Looking for a AbuseIPDB MCP server for OpenClaw? ClawLink connects AbuseIPDB to OpenClaw and exposes 6 AbuseIPDB tools your agent can call over MCP, with hosted auth and nothing to run or maintain yourself. Using Hermes instead? The Hermes AbuseIPDB integration works the same way.
What the OpenClaw AbuseIPDB integration can do
6 AbuseIPDB tools are ready for OpenClaw once the account is connected.
All 6 AbuseIPDB tools for OpenClaw
| Tool | What it does |
|---|---|
Blacklist abuselpdb_blacklist | Retrieves a list of the most reported malicious IP addresses from AbuseIPDB's database |
Check block abuselpdb_check_block | Check the reputation of all IP addresses in a CIDR range |
Check ip abuselpdb_check_ip | Check the reputation of an IP address |
Get reports abuselpdb_get_reports | Retrieve abuse reports for a specific IP address from AbuseIPDB |
Bulk report abuselpdb_bulk_report | Submit multiple IP abuse reports to AbuseIPDB in bulk via CSV upload |
Clear address abuselpdb_clear_address | Remove all reports associated with a specific IP address |
Try it: find the AbuseIPDB tool you need
Browse the 6 AbuseIPDB tools
Click any tool to see exactly what OpenClaw can do and copy a ready-to-use prompt.
Example prompts
Use AbuseIPDB to blacklist and walk me through the result in plain English.
Use AbuseIPDB to check block and walk me through the result in plain English.
Use AbuseIPDB to check ip and walk me through the result in plain English.
Pull the relevant data from AbuseIPDB, summarize it in plain English, and point out anything that needs attention.
ClawLink vs. building it yourself
The alternative to ClawLink is usually manual API key setup plus your own token handling, permission troubleshooting, and tool plumbing for OpenClaw. That is fine if you want to build and maintain the integration yourself. Most teams just want AbuseIPDB working from chat.
| Manual | ClawLink | |
|---|---|---|
| Credential handling | Collect, validate, store, and rotate the AbuseIPDB API key yourself, then make sure every tool call uses the right account. | Users complete the hosted ClawLink setup once and the connected AbuseIPDB account becomes available to the agent without you building credential management. |
| Ongoing maintenance | You own refresh logic, permission debugging, environment config, and every provider-specific edge case for AbuseIPDB. | ClawLink handles the repetitive integration plumbing so your team can focus on the workflow instead of the infrastructure. |
| Agent usability | You still need to expose the right AbuseIPDB actions to the runtime in a format your agent can reliably use. | 6 tools for AbuseIPDB are already exposed through ClawLink, so the agent can read and act from chat immediately. |
ClawLink vs. Composio
Composio also exposes AbuseIPDB to AI agents. It is developer infrastructure: Python and TypeScript SDKs, an MCP server, and a catalog past 1,000 apps, aimed at teams shipping agent products. ClawLink is built for OpenClaw users instead. You install the plugin once, connect AbuseIPDB in the browser, and the 6 tools above work from chat. There is no SDK and no config file, and the AbuseIPDB key you paste at setup is stored server-side rather than kept in your environment. Choosing between them? Read the full Composio alternatives comparison.
Troubleshooting
OpenClaw installed the AbuseIPDB skill but can't call the tools
The ClawHub skill teaches OpenClaw about AbuseIPDB, but the calls run through the ClawLink plugin and your connected account. Make sure AbuseIPDB is connected in the dashboard, then start a fresh chat so OpenClaw reloads the tool catalog. If OpenClaw runs as a persistent gateway, restart it so the new tools register.
Connection succeeds but no tools appear
Reconnect AbuseIPDB from the dashboard, then start a fresh chat if the runtime still has the old tool catalog loaded.
"Tool schema not loaded yet" error when calling AbuseIPDB tools
AbuseIPDB tool schemas load on demand the first time a tool runs and are cached after that, so this error usually clears on its own: wait a few seconds and retry the same request. If every AbuseIPDB call keeps failing with it in a fresh chat, reconnect from the dashboard, and contact support if it still persists — that pattern points to a configuration problem on our side, not something you can fix by reconnecting again.
AbuseIPDB returns 403 or "permission denied" on one action while others work
Two usual causes. The connected account may not have access to the specific workspace, inbox, store, or project in the request — check that first. If access looks right, the agent may have sent a placeholder value (like "YOUR_ID" or an example id from documentation) instead of a real one: ask it to run a list or search tool first, then retry the action with a real id from those results. Most failures at this stage are one of these two, not ClawLink bugs.
API key setup works but results look incomplete
Double-check that the API key for AbuseIPDB has the right scopes or account access. A valid key can still be too limited for some reads or writes.
FAQ
Is there a OpenClaw AbuseIPDB integration?
Yes. ClawLink is the fastest way to connect OpenClaw to AbuseIPDB: link your AbuseIPDB account once in the browser and OpenClaw can call the AbuseIPDB API through 6 ready-made tools — no custom code or token handling.
How do I add AbuseIPDB to OpenClaw with ClawLink?
Paste the setup prompt from this page into OpenClaw. It installs the ClawLink AbuseIPDB skill from ClawHub, then you click Connect in the dashboard to authorize AbuseIPDB. OpenClaw calls the tools from the next message — no config files, and the AbuseIPDB key you paste is stored server-side instead of in your environment.
How long does it take to connect AbuseIPDB to OpenClaw?
About two minutes. Sign in, click Connect next to AbuseIPDB in the dashboard, authenticate, and OpenClaw can use it from the next chat message.
Why use ClawLink instead of wiring AbuseIPDB up myself?
The alternative to ClawLink is usually manual API key setup plus your own token handling, permission troubleshooting, and tool plumbing for OpenClaw. That is fine if you want to build and maintain the integration yourself. Most teams just want AbuseIPDB working from chat.
OpenClaw installed the AbuseIPDB skill but can't call the tools
The ClawHub skill teaches OpenClaw about AbuseIPDB, but the calls run through the ClawLink plugin and your connected account. Make sure AbuseIPDB is connected in the dashboard, then start a fresh chat so OpenClaw reloads the tool catalog. If OpenClaw runs as a persistent gateway, restart it so the new tools register.
Related
GitHub
Manage repositories, issues, pull requests, and workflows
Connect PagerDuty
Manage incidents, on-call schedules, and services
OpenClaw SafetyCulture integration
SafetyCulture (formerly iAuditor) is a workplace operations platform that enables teams to conduct digital inspections, manage audits, track issues, schedule tasks, and maintain compliance through mobile and web applications.