How to connect Documint to OpenClaw
Connect Documint to OpenClaw with ClawLink: paste your Documint key once and 6 tools work from chat. No MCP server to run, nothing stored on your machine.
DocumintAPI KEYMCPDocumint is a document generation platform that allows you to create dynamic documents from templates.. Once connected, OpenClaw can read and act on Documint from chat — pairing, token refresh, and tool wiring handled for you.
The usual route to Documint access for OpenClaw is an MCP server you configure and keep running, plus your own OAuth app or API keys. ClawLink gives OpenClaw a more practical Documint setup: install one ClawHub skill, connect Documint in the browser, and OpenClaw can call real Documint actions from any chat surface with no auth, token refresh, or tool wiring to build yourself.
Setup
It takes three steps to connect OpenClaw to Documint.
1Install the plugin
Paste the setup prompt into OpenClaw, or install from the terminal and ask OpenClaw to pair:
openclaw plugins install clawhub:clawlink-plugin- 2
Connect Documint
Paste your API key in the dashboard.
- 3
Use it from chat
Ask OpenClaw: "What can you do with Documint?"
Install by command
The setup prompt above does all of this in one paste. By hand, it is one install command plus a browser approval:
openclaw plugins install clawhub:clawlink-pluginThen ask OpenClaw to set up ClawLink. It starts browser pairing and prints an approval link — open it, approve the device, return to the chat, and say done. Finally, connect Documint in the ClawLink dashboard — paste your Documint API key once.
Verify the connection by asking OpenClaw:
Pull the relevant data from Documint, summarize it in plain English, and point out anything that needs attention.
Using a different agent?
The OpenClaw plugin is one client of ClawLink's MCP server. Claude Code, Cursor, Codex, or any agent that can run a shell command pairs with the same ClawLink account through the CLI:
npx -y @useclawlink/cli loginlogin opens the same browser approval and stores a credential locally. Once Documint is connected in the dashboard, that agent calls the same 6 Documint tools over MCP. Full setup for MCP clients and shell agents: connect apps to any AI agent.
Documint MCP for OpenClaw
Looking for a Documint MCP server for OpenClaw? ClawLink connects Documint to OpenClaw and exposes 6 Documint tools your agent can call over MCP, with hosted auth and nothing to run or maintain yourself. Using Hermes instead? The Hermes Documint integration works the same way.
What the OpenClaw Documint integration can do
6 Documint tools are ready for OpenClaw once the account is connected. The 5 below are the ones people reach for most; your agent can call all 6.
5 of 6 Documint tools for OpenClaw
| Tool | What it does |
|---|---|
Get template documint_get_template | Retrieve a single template by its ID |
List documents documint_list_documents | Retrieves documents from the authenticated user's Documint account with optional pagination |
List templates documint_list_templates | List all templates in the authenticated user's account |
Create document documint_create_document | Merge data into a template to create a document (PDF generation) |
Update template documint_update_template | Update a single template by its ID |
Try it: find the Documint tool you need
Browse the 5 Documint tools
Click any tool to see exactly what OpenClaw can do and copy a ready-to-use prompt.
Example prompts
Pull the relevant data from Documint, summarize it in plain English, and point out anything that needs attention.
List the relevant items in Documint, group them by priority, and recommend what OpenClaw should do next.
List the relevant items in Documint, group them by priority, and recommend what OpenClaw should do next.
Create it in Documint for me, then confirm the important fields before you finish.
ClawLink vs. building it yourself
The alternative to ClawLink is usually manual API key setup plus your own token handling, permission troubleshooting, and tool plumbing for OpenClaw. That is fine if you want to build and maintain the integration yourself. Most teams just want Documint working from chat.
| Manual | ClawLink | |
|---|---|---|
| Credential handling | Collect, validate, store, and rotate the Documint API key yourself, then make sure every tool call uses the right account. | Users complete the hosted ClawLink setup once and the connected Documint account becomes available to the agent without you building credential management. |
| Ongoing maintenance | You own refresh logic, permission debugging, environment config, and every provider-specific edge case for Documint. | ClawLink handles the repetitive integration plumbing so your team can focus on the workflow instead of the infrastructure. |
| Agent usability | You still need to expose the right Documint actions to the runtime in a format your agent can reliably use. | 6 tools for Documint are already exposed through ClawLink, so the agent can read and act from chat immediately. |
ClawLink vs. Composio
Composio also exposes Documint to AI agents. It is developer infrastructure: Python and TypeScript SDKs, an MCP server, and a catalog past 1,000 apps, aimed at teams shipping agent products. ClawLink is built for OpenClaw users instead. You install the plugin once, connect Documint in the browser, and the 6 tools above work from chat. There is no SDK and no config file, and the Documint key you paste at setup is stored server-side rather than kept in your environment. Choosing between them? Read the full Composio alternatives comparison.
Troubleshooting
OpenClaw installed the Documint skill but can't call the tools
The ClawHub skill teaches OpenClaw about Documint, but the calls run through the ClawLink plugin and your connected account. Make sure Documint is connected in the dashboard, then start a fresh chat so OpenClaw reloads the tool catalog. If OpenClaw runs as a persistent gateway, restart it so the new tools register.
Connection succeeds but no tools appear
Reconnect Documint from the dashboard, then start a fresh chat if the runtime still has the old tool catalog loaded.
"Tool schema not loaded yet" error when calling Documint tools
Documint tool schemas load on demand the first time a tool runs and are cached after that, so this error usually clears on its own: wait a few seconds and retry the same request. If every Documint call keeps failing with it in a fresh chat, reconnect from the dashboard, and contact support if it still persists — that pattern points to a configuration problem on our side, not something you can fix by reconnecting again.
Documint returns 403 or "permission denied" on one action while others work
Two usual causes. The connected account may not have access to the specific workspace, inbox, store, or project in the request — check that first. If access looks right, the agent may have sent a placeholder value (like "YOUR_ID" or an example id from documentation) instead of a real one: ask it to run a list or search tool first, then retry the action with a real id from those results. Most failures at this stage are one of these two, not ClawLink bugs.
API key setup works but results look incomplete
Double-check that the API key for Documint has the right scopes or account access. A valid key can still be too limited for some reads or writes.
FAQ
Is there a OpenClaw Documint integration?
Yes. ClawLink is the fastest way to connect OpenClaw to Documint: link your Documint account once in the browser and OpenClaw can call the Documint API through 6 ready-made tools — no custom code or token handling.
How do I add Documint to OpenClaw with ClawLink?
Paste the setup prompt from this page into OpenClaw. It installs the ClawLink Documint skill from ClawHub, then you click Connect in the dashboard to authorize Documint. OpenClaw calls the tools from the next message — no config files, and the Documint key you paste is stored server-side instead of in your environment.
How long does it take to connect Documint to OpenClaw?
About two minutes. Sign in, click Connect next to Documint in the dashboard, authenticate, and OpenClaw can use it from the next chat message.
Why use ClawLink instead of wiring Documint up myself?
The alternative to ClawLink is usually manual API key setup plus your own token handling, permission troubleshooting, and tool plumbing for OpenClaw. That is fine if you want to build and maintain the integration yourself. Most teams just want Documint working from chat.
OpenClaw installed the Documint skill but can't call the tools
The ClawHub skill teaches OpenClaw about Documint, but the calls run through the ClawLink plugin and your connected account. Make sure Documint is connected in the dashboard, then start a fresh chat so OpenClaw reloads the tool catalog. If OpenClaw runs as a persistent gateway, restart it so the new tools register.
Related
Connect GitHub
Manage repositories, issues, pull requests, and workflows
OpenClaw PagerDuty integration
Manage incidents, on-call schedules, and services
OpenClaw SafetyCulture integration
SafetyCulture (formerly iAuditor) is a workplace operations platform that enables teams to conduct digital inspections, manage audits, track issues, schedule tasks, and maintain compliance through mobile and web applications.