How to connect Nusii proposals to OpenClaw
Connect Nusii proposals to OpenClaw with ClawLink: paste your Nusii proposals key once and 29 tools work from chat. No MCP server to run, nothing stored on your machine.
Nusii proposalsAPI KEYMCPProposal software that both you and your clients will love.. Once connected, OpenClaw can read and act on Nusii proposals from chat — pairing, token refresh, and tool wiring handled for you.
The usual route to Nusii proposals access for OpenClaw is an MCP server you configure and keep running, plus your own OAuth app or API keys. ClawLink gives OpenClaw a more practical Nusii proposals setup: install one ClawHub skill, connect Nusii proposals in the browser, and OpenClaw can call real Nusii proposals actions from any chat surface with no auth, token refresh, or tool wiring to build yourself.
Setup
It takes three steps to connect OpenClaw to Nusii proposals.
1Install the plugin
Paste the setup prompt into OpenClaw, or install from the terminal and ask OpenClaw to pair:
openclaw plugins install clawhub:clawlink-plugin- 2
Connect Nusii proposals
Paste your API key in the dashboard.
- 3
Use it from chat
Ask OpenClaw: "What can you do with Nusii proposals?"
Install by command
The setup prompt above does all of this in one paste. By hand, it is one install command plus a browser approval:
openclaw plugins install clawhub:clawlink-pluginThen ask OpenClaw to set up ClawLink. It starts browser pairing and prints an approval link — open it, approve the device, return to the chat, and say done. Finally, connect Nusii proposals in the ClawLink dashboard — paste your Nusii proposals API key once.
Verify the connection by asking OpenClaw:
Pull the relevant data from Nusii proposals, summarize it in plain English, and point out anything that needs attention.
Using a different agent?
The OpenClaw plugin is one client of ClawLink's MCP server. Claude Code, Cursor, Codex, or any agent that can run a shell command pairs with the same ClawLink account through the CLI:
npx -y @useclawlink/cli loginlogin opens the same browser approval and stores a credential locally. Once Nusii proposals is connected in the dashboard, that agent calls the same 29 Nusii proposals tools over MCP. Full setup for MCP clients and shell agents: connect apps to any AI agent.
Nusii proposals MCP for OpenClaw
Looking for a Nusii proposals MCP server for OpenClaw? ClawLink connects Nusii proposals to OpenClaw and exposes 29 Nusii proposals tools your agent can call over MCP, with hosted auth and nothing to run or maintain yourself. Using Hermes instead? The Hermes Nusii proposals integration works the same way.
What the OpenClaw Nusii proposals integration can do
29 Nusii proposals tools are ready for OpenClaw once the account is connected. The 24 below are the ones people reach for most; your agent can call all 29.
24 of 29 Nusii proposals tools for OpenClaw
| Tool | What it does |
|---|---|
Get account me nusii_proposals_get_account_me | Retrieve authenticated user's personal account information and settings |
Get client nusii_proposals_get_client | Retrieve a single client from Nusii using their unique identifier |
Get proposal nusii_proposals_get_proposal | Retrieve a single proposal with complete details and sections |
Get section nusii_proposals_get_section | Retrieve a single section from a proposal or template in Nusii |
Get webhook endpoint nusii_proposals_get_webhook_endpoint | Retrieve a single webhook endpoint configuration |
List clients nusii_proposals_list_clients | Retrieve all clients associated with the account |
List line items nusii_proposals_list_line_items | Retrieve all line items from Nusii Proposals with pagination support |
List proposal activities nusii_proposals_list_proposal_activities | Retrieve all proposal activities with optional filtering by proposal or client ID |
List proposals nusii_proposals_list_proposals | Retrieve all proposals from your Nusii account with pagination and filtering options |
List section line items nusii_proposals_list_section_line_items | Retrieve all line items from a specific section |
List sections nusii_proposals_list_sections | Retrieve all sections with optional filtering for proposals or templates |
List themes nusii_proposals_list_themes | Retrieve all available themes for proposals in Nusii |
List users nusii_proposals_list_users | Retrieve all users in paginated format |
List webhook endpoints nusii_proposals_list_webhook_endpoints | Retrieve all webhook endpoints configured for your Nusii account |
Archive proposal nusii_proposals_archive_proposal | Archive a specific proposal in Nusii |
Create client nusii_proposals_create_client | Create a new client in Nusii Proposals |
Create line item nusii_proposals_create_line_item | Create a line item within a proposal section |
Create proposal nusii_proposals_create_proposal | Create a new proposal in Nusii |
Create section nusii_proposals_create_section | Create a section for a proposal or template in Nusii Proposals |
Create webhook endpoint nusii_proposals_create_webhook_endpoint | Create a webhook endpoint to subscribe to Nusii events |
Update client nusii_proposals_update_client | Update an existing client's information in Nusii |
Update line item nusii_proposals_update_line_item | Update an existing line item in Nusii proposals |
Update proposal nusii_proposals_update_proposal | Update an existing proposal in Nusii |
Update section nusii_proposals_update_section | Update an existing section in a proposal or template |
Try it: find the Nusii proposals tool you need
Browse the 24 Nusii proposals tools
Click any tool to see exactly what OpenClaw can do and copy a ready-to-use prompt.
Example prompts
Pull the relevant data from Nusii proposals, summarize it in plain English, and point out anything that needs attention.
Pull the relevant data from Nusii proposals, summarize it in plain English, and point out anything that needs attention.
Pull the relevant data from Nusii proposals, summarize it in plain English, and point out anything that needs attention.
Pull the relevant data from Nusii proposals, summarize it in plain English, and point out anything that needs attention.
ClawLink vs. building it yourself
The alternative to ClawLink is usually manual API key setup plus your own token handling, permission troubleshooting, and tool plumbing for OpenClaw. That is fine if you want to build and maintain the integration yourself. Most teams just want Nusii proposals working from chat.
| Manual | ClawLink | |
|---|---|---|
| Credential handling | Collect, validate, store, and rotate the Nusii proposals API key yourself, then make sure every tool call uses the right account. | Users complete the hosted ClawLink setup once and the connected Nusii proposals account becomes available to the agent without you building credential management. |
| Ongoing maintenance | You own refresh logic, permission debugging, environment config, and every provider-specific edge case for Nusii proposals. | ClawLink handles the repetitive integration plumbing so your team can focus on the workflow instead of the infrastructure. |
| Agent usability | You still need to expose the right Nusii proposals actions to the runtime in a format your agent can reliably use. | 29 tools for Nusii proposals are already exposed through ClawLink, so the agent can read and act from chat immediately. |
ClawLink vs. Composio
Composio also exposes Nusii proposals to AI agents. It is developer infrastructure: Python and TypeScript SDKs, an MCP server, and a catalog past 1,000 apps, aimed at teams shipping agent products. ClawLink is built for OpenClaw users instead. You install the plugin once, connect Nusii proposals in the browser, and the 29 tools above work from chat. There is no SDK and no config file, and the Nusii proposals key you paste at setup is stored server-side rather than kept in your environment. Choosing between them? Read the full Composio alternatives comparison.
Troubleshooting
OpenClaw installed the Nusii proposals skill but can't call the tools
The ClawHub skill teaches OpenClaw about Nusii proposals, but the calls run through the ClawLink plugin and your connected account. Make sure Nusii proposals is connected in the dashboard, then start a fresh chat so OpenClaw reloads the tool catalog. If OpenClaw runs as a persistent gateway, restart it so the new tools register.
Connection succeeds but no tools appear
Reconnect Nusii proposals from the dashboard, then start a fresh chat if the runtime still has the old tool catalog loaded.
"Tool schema not loaded yet" error when calling Nusii proposals tools
Nusii proposals tool schemas load on demand the first time a tool runs and are cached after that, so this error usually clears on its own: wait a few seconds and retry the same request. If every Nusii proposals call keeps failing with it in a fresh chat, reconnect from the dashboard, and contact support if it still persists — that pattern points to a configuration problem on our side, not something you can fix by reconnecting again.
Nusii proposals returns 403 or "permission denied" on one action while others work
Two usual causes. The connected account may not have access to the specific workspace, inbox, store, or project in the request — check that first. If access looks right, the agent may have sent a placeholder value (like "YOUR_ID" or an example id from documentation) instead of a real one: ask it to run a list or search tool first, then retry the action with a real id from those results. Most failures at this stage are one of these two, not ClawLink bugs.
API key setup works but results look incomplete
Double-check that the API key for Nusii proposals has the right scopes or account access. A valid key can still be too limited for some reads or writes.
FAQ
Is there a OpenClaw Nusii proposals integration?
Yes. ClawLink is the fastest way to connect OpenClaw to Nusii proposals: link your Nusii proposals account once in the browser and OpenClaw can call the Nusii proposals API through 29 ready-made tools — no custom code or token handling.
How do I add Nusii proposals to OpenClaw with ClawLink?
Paste the setup prompt from this page into OpenClaw. It installs the ClawLink Nusii proposals skill from ClawHub, then you click Connect in the dashboard to authorize Nusii proposals. OpenClaw calls the tools from the next message — no config files, and the Nusii proposals key you paste is stored server-side instead of in your environment.
How long does it take to connect Nusii proposals to OpenClaw?
About two minutes. Sign in, click Connect next to Nusii proposals in the dashboard, authenticate, and OpenClaw can use it from the next chat message.
Why use ClawLink instead of wiring Nusii proposals up myself?
The alternative to ClawLink is usually manual API key setup plus your own token handling, permission troubleshooting, and tool plumbing for OpenClaw. That is fine if you want to build and maintain the integration yourself. Most teams just want Nusii proposals working from chat.
OpenClaw installed the Nusii proposals skill but can't call the tools
The ClawHub skill teaches OpenClaw about Nusii proposals, but the calls run through the ClawLink plugin and your connected account. Make sure Nusii proposals is connected in the dashboard, then start a fresh chat so OpenClaw reloads the tool catalog. If OpenClaw runs as a persistent gateway, restart it so the new tools register.
Related
Connect GitHub
Manage repositories, issues, pull requests, and workflows
Connect PagerDuty
Manage incidents, on-call schedules, and services
OpenClaw SafetyCulture integration
SafetyCulture (formerly iAuditor) is a workplace operations platform that enables teams to conduct digital inspections, manage audits, track issues, schedule tasks, and maintain compliance through mobile and web applications.