How to connect Ignisign to OpenClaw
Connect Ignisign to OpenClaw with ClawLink: paste your Ignisign key once and 32 tools work from chat. No MCP server to run, nothing stored on your machine.
IgnisignAPI KEYMCPIgniSign is a comprehensive electronic signature platform that enables users to sign, send, and manage documents securely online.. Once connected, OpenClaw can read and act on Ignisign from chat — pairing, token refresh, and tool wiring handled for you.
The usual route to Ignisign access for OpenClaw is an MCP server you configure and keep running, plus your own OAuth app or API keys. ClawLink gives OpenClaw a more practical Ignisign setup: install one ClawHub skill, connect Ignisign in the browser, and OpenClaw can call real Ignisign actions from any chat surface with no auth, token refresh, or tool wiring to build yourself.
Setup
It takes three steps to connect OpenClaw to Ignisign.
1Install the plugin
Paste the setup prompt into OpenClaw, or install from the terminal and ask OpenClaw to pair:
openclaw plugins install clawhub:clawlink-plugin- 2
Connect Ignisign
Paste your API key in the dashboard.
- 3
Use it from chat
Ask OpenClaw: "What can you do with Ignisign?"
Install by command
The setup prompt above does all of this in one paste. By hand, it is one install command plus a browser approval:
openclaw plugins install clawhub:clawlink-pluginThen ask OpenClaw to set up ClawLink. It starts browser pairing and prints an approval link — open it, approve the device, return to the chat, and say done. Finally, connect Ignisign in the ClawLink dashboard — paste your Ignisign API key once.
Verify the connection by asking OpenClaw:
Pull the relevant data from Ignisign, summarize it in plain English, and point out anything that needs attention.
Using a different agent?
The OpenClaw plugin is one client of ClawLink's MCP server. Claude Code, Cursor, Codex, or any agent that can run a shell command pairs with the same ClawLink account through the CLI:
npx -y @useclawlink/cli loginlogin opens the same browser approval and stores a credential locally. Once Ignisign is connected in the dashboard, that agent calls the same 32 Ignisign tools over MCP. Full setup for MCP clients and shell agents: connect apps to any AI agent.
Ignisign MCP for OpenClaw
Looking for a Ignisign MCP server for OpenClaw? ClawLink connects Ignisign to OpenClaw and exposes 32 Ignisign tools your agent can call over MCP, with hosted auth and nothing to run or maintain yourself. Using Hermes instead? The Hermes Ignisign integration works the same way.
What the OpenClaw Ignisign integration can do
32 Ignisign tools are ready for OpenClaw once the account is connected. The 28 below are the ones people reach for most; your agent can call all 32.
28 of 32 Ignisign tools for OpenClaw
| Tool | What it does |
|---|---|
Get application context ignisign_get_application_context | Retrieve the global context of an application |
Get document information ignisign_get_document_information | Retrieve document metadata by ID |
Get missing signer inputs ignisign_get_missing_signer_inputs | Determine missing inputs needed for a signer in a specific signature profile |
Get signature request details ignisign_get_signature_request_details | Retrieve detailed information for a specific signature request |
Get signature request document ignisign_get_signature_request_document | Retrieve the document associated with a specific signature request |
Get signature requests ignisign_get_signature_requests | Retrieves a paginated list of signature requests for a specific Ignisign application and |
Get signed document ignisign_get_signed_document | Download the signed document (signature proof) for a signature request |
Get signer input constraints ignisign_get_signer_input_constraints | Get signer input constraints |
Get signer inputs ignisign_get_signer_inputs | Retrieves the inputs provided by a specific signer for a signature request |
Get signer profile ignisign_get_signer_profile | Retrieve detailed information about a specific signer profile by its ID |
Get signer profiles ignisign_get_signer_profiles | Retrieve all signer profiles for a specific Ignisign application environment |
Get webhooks ignisign_get_webhooks | Retrieves all webhook endpoints configured for a specific Ignisign application environment |
List documents ignisign_list_documents | Retrieve documents linked to a signature request |
Search signers ignisign_search_signers | Search for signers within an application environment with pagination support |
API authentication ignisign_api_authentication | Authenticate an application over Ignisign API and retrieve a JWT |
Create document ignisign_create_document | Initialize a document for a signature request |
Create signer ignisign_create_signer | Create a new signer |
Create webhook endpoint ignisign_create_webhook_endpoint | Create a new webhook endpoint for an application |
Init signature request ignisign_init_signature_request | Initialize a new signature request in Ignisign |
Provide document content data json ignisign_provide_document_content_data_json | Provides JSON content to an existing document in Ignisign |
Provide document content file ignisign_provide_document_content_file | Provide file content for a document |
Provide document content private file ignisign_provide_document_content_private_file | Provides private document content by submitting its SHA-256 hash to IgniSign |
Publish signature request ignisign_publish_signature_request | Publish a draft signature request |
Update document information ignisign_update_document_information | Update document metadata |
Update signature request ignisign_update_signature_request | Partially update a signature request in DRAFT state |
Update signer ignisign_update_signer | Updates an existing signer's profile assignment |
Update webhook endpoint ignisign_update_webhook_endpoint | Update an existing webhook endpoint |
Cancel signature request ignisign_cancel_signature_request | Cancel (close) a signature request to terminate it |
Try it: find the Ignisign tool you need
Browse the 28 Ignisign tools
Click any tool to see exactly what OpenClaw can do and copy a ready-to-use prompt.
Example prompts
Pull the relevant data from Ignisign, summarize it in plain English, and point out anything that needs attention.
Pull the relevant data from Ignisign, summarize it in plain English, and point out anything that needs attention.
Pull the relevant data from Ignisign, summarize it in plain English, and point out anything that needs attention.
Pull the relevant data from Ignisign, summarize it in plain English, and point out anything that needs attention.
ClawLink vs. building it yourself
The alternative to ClawLink is usually manual API key setup plus your own token handling, permission troubleshooting, and tool plumbing for OpenClaw. That is fine if you want to build and maintain the integration yourself. Most teams just want Ignisign working from chat.
| Manual | ClawLink | |
|---|---|---|
| Credential handling | Collect, validate, store, and rotate the Ignisign API key yourself, then make sure every tool call uses the right account. | Users complete the hosted ClawLink setup once and the connected Ignisign account becomes available to the agent without you building credential management. |
| Ongoing maintenance | You own refresh logic, permission debugging, environment config, and every provider-specific edge case for Ignisign. | ClawLink handles the repetitive integration plumbing so your team can focus on the workflow instead of the infrastructure. |
| Agent usability | You still need to expose the right Ignisign actions to the runtime in a format your agent can reliably use. | 32 tools for Ignisign are already exposed through ClawLink, so the agent can read and act from chat immediately. |
ClawLink vs. Composio
Composio also exposes Ignisign to AI agents. It is developer infrastructure: Python and TypeScript SDKs, an MCP server, and a catalog past 1,000 apps, aimed at teams shipping agent products. ClawLink is built for OpenClaw users instead. You install the plugin once, connect Ignisign in the browser, and the 32 tools above work from chat. There is no SDK and no config file, and the Ignisign key you paste at setup is stored server-side rather than kept in your environment. Choosing between them? Read the full Composio alternatives comparison.
Troubleshooting
OpenClaw installed the Ignisign skill but can't call the tools
The ClawHub skill teaches OpenClaw about Ignisign, but the calls run through the ClawLink plugin and your connected account. Make sure Ignisign is connected in the dashboard, then start a fresh chat so OpenClaw reloads the tool catalog. If OpenClaw runs as a persistent gateway, restart it so the new tools register.
Connection succeeds but no tools appear
Reconnect Ignisign from the dashboard, then start a fresh chat if the runtime still has the old tool catalog loaded.
"Tool schema not loaded yet" error when calling Ignisign tools
Ignisign tool schemas load on demand the first time a tool runs and are cached after that, so this error usually clears on its own: wait a few seconds and retry the same request. If every Ignisign call keeps failing with it in a fresh chat, reconnect from the dashboard, and contact support if it still persists — that pattern points to a configuration problem on our side, not something you can fix by reconnecting again.
Ignisign returns 403 or "permission denied" on one action while others work
Two usual causes. The connected account may not have access to the specific workspace, inbox, store, or project in the request — check that first. If access looks right, the agent may have sent a placeholder value (like "YOUR_ID" or an example id from documentation) instead of a real one: ask it to run a list or search tool first, then retry the action with a real id from those results. Most failures at this stage are one of these two, not ClawLink bugs.
API key setup works but results look incomplete
Double-check that the API key for Ignisign has the right scopes or account access. A valid key can still be too limited for some reads or writes.
FAQ
Is there a OpenClaw Ignisign integration?
Yes. ClawLink is the fastest way to connect OpenClaw to Ignisign: link your Ignisign account once in the browser and OpenClaw can call the Ignisign API through 32 ready-made tools — no custom code or token handling.
How do I add Ignisign to OpenClaw with ClawLink?
Paste the setup prompt from this page into OpenClaw. It installs the ClawLink Ignisign skill from ClawHub, then you click Connect in the dashboard to authorize Ignisign. OpenClaw calls the tools from the next message — no config files, and the Ignisign key you paste is stored server-side instead of in your environment.
How long does it take to connect Ignisign to OpenClaw?
About two minutes. Sign in, click Connect next to Ignisign in the dashboard, authenticate, and OpenClaw can use it from the next chat message.
Why use ClawLink instead of wiring Ignisign up myself?
The alternative to ClawLink is usually manual API key setup plus your own token handling, permission troubleshooting, and tool plumbing for OpenClaw. That is fine if you want to build and maintain the integration yourself. Most teams just want Ignisign working from chat.
OpenClaw installed the Ignisign skill but can't call the tools
The ClawHub skill teaches OpenClaw about Ignisign, but the calls run through the ClawLink plugin and your connected account. Make sure Ignisign is connected in the dashboard, then start a fresh chat so OpenClaw reloads the tool catalog. If OpenClaw runs as a persistent gateway, restart it so the new tools register.
Related
GitHub
Manage repositories, issues, pull requests, and workflows
PagerDuty tools
Manage incidents, on-call schedules, and services
SafetyCulture tools
SafetyCulture (formerly iAuditor) is a workplace operations platform that enables teams to conduct digital inspections, manage audits, track issues, schedule tasks, and maintain compliance through mobile and web applications.