How to connect Globalping to OpenClaw
Connect Globalping to OpenClaw with ClawLink: paste your Globalping key once and 5 tools work from chat. No MCP server to run, nothing stored on your machine.
GlobalpingAPI KEYMCPGlobalping is a global network of probes that allows users to run network tests like ping, traceroute, and DNS resolve from various locations worldwide.. Once connected, OpenClaw can read and act on Globalping from chat — pairing, token refresh, and tool wiring handled for you.
The usual route to Globalping access for OpenClaw is an MCP server you configure and keep running, plus your own OAuth app or API keys. ClawLink gives OpenClaw a more practical Globalping setup: install one ClawHub skill, connect Globalping in the browser, and OpenClaw can call real Globalping actions from any chat surface with no auth, token refresh, or tool wiring to build yourself.
Setup
It takes three steps to connect OpenClaw to Globalping.
1Install the plugin
Paste the setup prompt into OpenClaw, or install from the terminal and ask OpenClaw to pair:
openclaw plugins install clawhub:clawlink-plugin- 2
Connect Globalping
Paste your API key in the dashboard.
- 3
Use it from chat
Ask OpenClaw: "What can you do with Globalping?"
Install by command
The setup prompt above does all of this in one paste. By hand, it is one install command plus a browser approval:
openclaw plugins install clawhub:clawlink-pluginThen ask OpenClaw to set up ClawLink. It starts browser pairing and prints an approval link — open it, approve the device, return to the chat, and say done. Finally, connect Globalping in the ClawLink dashboard — paste your Globalping API key once.
Verify the connection by asking OpenClaw:
Pull the relevant data from Globalping, summarize it in plain English, and point out anything that needs attention.
Using a different agent?
The OpenClaw plugin is one client of ClawLink's MCP server. Claude Code, Cursor, Codex, or any agent that can run a shell command pairs with the same ClawLink account through the CLI:
npx -y @useclawlink/cli loginlogin opens the same browser approval and stores a credential locally. Once Globalping is connected in the dashboard, that agent calls the same 5 Globalping tools over MCP. Full setup for MCP clients and shell agents: connect apps to any AI agent.
Globalping MCP for OpenClaw
Looking for a Globalping MCP server for OpenClaw? ClawLink connects Globalping to OpenClaw and exposes 5 Globalping tools your agent can call over MCP, with hosted auth and nothing to run or maintain yourself. Using Hermes instead? The Hermes Globalping integration works the same way.
What the OpenClaw Globalping integration can do
5 Globalping tools are ready for OpenClaw once the account is connected.
All 5 Globalping tools for OpenClaw
| Tool | What it does |
|---|---|
Get limits globalping_get_limits | Retrieve current rate limits and credits |
Get measurement globalping_get_measurement | Retrieve measurement results by ID |
Health check globalping_health_check | Check API health status |
List probes globalping_list_probes | Retrieve all currently online Globalping probes worldwide |
Create measurement globalping_create_measurement | Create and trigger a network measurement |
Try it: find the Globalping tool you need
Browse the 5 Globalping tools
Click any tool to see exactly what OpenClaw can do and copy a ready-to-use prompt.
Example prompts
Pull the relevant data from Globalping, summarize it in plain English, and point out anything that needs attention.
Pull the relevant data from Globalping, summarize it in plain English, and point out anything that needs attention.
Use Globalping to health check and walk me through the result in plain English.
List the relevant items in Globalping, group them by priority, and recommend what OpenClaw should do next.
ClawLink vs. building it yourself
The alternative to ClawLink is usually manual API key setup plus your own token handling, permission troubleshooting, and tool plumbing for OpenClaw. That is fine if you want to build and maintain the integration yourself. Most teams just want Globalping working from chat.
| Manual | ClawLink | |
|---|---|---|
| Credential handling | Collect, validate, store, and rotate the Globalping API key yourself, then make sure every tool call uses the right account. | Users complete the hosted ClawLink setup once and the connected Globalping account becomes available to the agent without you building credential management. |
| Ongoing maintenance | You own refresh logic, permission debugging, environment config, and every provider-specific edge case for Globalping. | ClawLink handles the repetitive integration plumbing so your team can focus on the workflow instead of the infrastructure. |
| Agent usability | You still need to expose the right Globalping actions to the runtime in a format your agent can reliably use. | 5 tools for Globalping are already exposed through ClawLink, so the agent can read and act from chat immediately. |
ClawLink vs. Composio
Composio also exposes Globalping to AI agents. It is developer infrastructure: Python and TypeScript SDKs, an MCP server, and a catalog past 1,000 apps, aimed at teams shipping agent products. ClawLink is built for OpenClaw users instead. You install the plugin once, connect Globalping in the browser, and the 5 tools above work from chat. There is no SDK and no config file, and the Globalping key you paste at setup is stored server-side rather than kept in your environment. Choosing between them? Read the full Composio alternatives comparison.
Troubleshooting
OpenClaw installed the Globalping skill but can't call the tools
The ClawHub skill teaches OpenClaw about Globalping, but the calls run through the ClawLink plugin and your connected account. Make sure Globalping is connected in the dashboard, then start a fresh chat so OpenClaw reloads the tool catalog. If OpenClaw runs as a persistent gateway, restart it so the new tools register.
Connection succeeds but no tools appear
Reconnect Globalping from the dashboard, then start a fresh chat if the runtime still has the old tool catalog loaded.
"Tool schema not loaded yet" error when calling Globalping tools
Globalping tool schemas load on demand the first time a tool runs and are cached after that, so this error usually clears on its own: wait a few seconds and retry the same request. If every Globalping call keeps failing with it in a fresh chat, reconnect from the dashboard, and contact support if it still persists — that pattern points to a configuration problem on our side, not something you can fix by reconnecting again.
Globalping returns 403 or "permission denied" on one action while others work
Two usual causes. The connected account may not have access to the specific workspace, inbox, store, or project in the request — check that first. If access looks right, the agent may have sent a placeholder value (like "YOUR_ID" or an example id from documentation) instead of a real one: ask it to run a list or search tool first, then retry the action with a real id from those results. Most failures at this stage are one of these two, not ClawLink bugs.
API key setup works but results look incomplete
Double-check that the API key for Globalping has the right scopes or account access. A valid key can still be too limited for some reads or writes.
FAQ
Is there a OpenClaw Globalping integration?
Yes. ClawLink is the fastest way to connect OpenClaw to Globalping: link your Globalping account once in the browser and OpenClaw can call the Globalping API through 5 ready-made tools — no custom code or token handling.
How do I add Globalping to OpenClaw with ClawLink?
Paste the setup prompt from this page into OpenClaw. It installs the ClawLink Globalping skill from ClawHub, then you click Connect in the dashboard to authorize Globalping. OpenClaw calls the tools from the next message — no config files, and the Globalping key you paste is stored server-side instead of in your environment.
How long does it take to connect Globalping to OpenClaw?
About two minutes. Sign in, click Connect next to Globalping in the dashboard, authenticate, and OpenClaw can use it from the next chat message.
Why use ClawLink instead of wiring Globalping up myself?
The alternative to ClawLink is usually manual API key setup plus your own token handling, permission troubleshooting, and tool plumbing for OpenClaw. That is fine if you want to build and maintain the integration yourself. Most teams just want Globalping working from chat.
OpenClaw installed the Globalping skill but can't call the tools
The ClawHub skill teaches OpenClaw about Globalping, but the calls run through the ClawLink plugin and your connected account. Make sure Globalping is connected in the dashboard, then start a fresh chat so OpenClaw reloads the tool catalog. If OpenClaw runs as a persistent gateway, restart it so the new tools register.
Related
OpenClaw GitHub integration
Manage repositories, issues, pull requests, and workflows
PagerDuty tools
Manage incidents, on-call schedules, and services
SafetyCulture
SafetyCulture (formerly iAuditor) is a workplace operations platform that enables teams to conduct digital inspections, manage audits, track issues, schedule tasks, and maintain compliance through mobile and web applications.