How to connect Docugenerate to OpenClaw
Connect Docugenerate to OpenClaw with ClawLink: paste your Docugenerate key once and 9 tools work from chat. No MCP server to run, nothing stored on your machine.
DocugenerateAPI KEYMCPDocuGenerate simplifies document generation by converting Word templates and JSON data into professional PDF files with ease.. Once connected, OpenClaw can read and act on Docugenerate from chat — pairing, token refresh, and tool wiring handled for you.
The usual route to Docugenerate access for OpenClaw is an MCP server you configure and keep running, plus your own OAuth app or API keys. ClawLink gives OpenClaw a more practical Docugenerate setup: install one ClawHub skill, connect Docugenerate in the browser, and OpenClaw can call real Docugenerate actions from any chat surface with no auth, token refresh, or tool wiring to build yourself.
Setup
It takes three steps to connect OpenClaw to Docugenerate.
1Install the plugin
Paste the setup prompt into OpenClaw, or install from the terminal and ask OpenClaw to pair:
openclaw plugins install clawhub:clawlink-plugin- 2
Connect Docugenerate
Paste your API key in the dashboard.
- 3
Use it from chat
Ask OpenClaw: "What can you do with Docugenerate?"
Install by command
The setup prompt above does all of this in one paste. By hand, it is one install command plus a browser approval:
openclaw plugins install clawhub:clawlink-pluginThen ask OpenClaw to set up ClawLink. It starts browser pairing and prints an approval link — open it, approve the device, return to the chat, and say done. Finally, connect Docugenerate in the ClawLink dashboard — paste your Docugenerate API key once.
Verify the connection by asking OpenClaw:
Pull the relevant data from Docugenerate, summarize it in plain English, and point out anything that needs attention.
Using a different agent?
The OpenClaw plugin is one client of ClawLink's MCP server. Claude Code, Cursor, Codex, or any agent that can run a shell command pairs with the same ClawLink account through the CLI:
npx -y @useclawlink/cli loginlogin opens the same browser approval and stores a credential locally. Once Docugenerate is connected in the dashboard, that agent calls the same 9 Docugenerate tools over MCP. Full setup for MCP clients and shell agents: connect apps to any AI agent.
Docugenerate MCP for OpenClaw
Looking for a Docugenerate MCP server for OpenClaw? ClawLink connects Docugenerate to OpenClaw and exposes 9 Docugenerate tools your agent can call over MCP, with hosted auth and nothing to run or maintain yourself. Using Hermes instead? The Hermes Docugenerate integration works the same way.
What the OpenClaw Docugenerate integration can do
9 Docugenerate tools are ready for OpenClaw once the account is connected. The 7 below are the ones people reach for most; your agent can call all 9.
7 of 9 Docugenerate tools for OpenClaw
| Tool | What it does |
|---|---|
Get document docugenerate_get_document | Retrieve a specific document by ID |
Get template docugenerate_get_template | Retrieve a specific template by ID |
List documents docugenerate_list_documents | List all documents generated from a template |
Template get or list docugenerate_template_get_or_list | Retrieve or list existing templates |
Document generate docugenerate_document_generate | Generate document(s) from a template by merging JSON data or uploading a data file |
Document update docugenerate_document_update | Update a document's name/title in DocuGenerate |
Template update docugenerate_template_update | Update a template’s file and settings |
Try it: find the Docugenerate tool you need
Browse the 7 Docugenerate tools
Click any tool to see exactly what OpenClaw can do and copy a ready-to-use prompt.
Example prompts
Pull the relevant data from Docugenerate, summarize it in plain English, and point out anything that needs attention.
Pull the relevant data from Docugenerate, summarize it in plain English, and point out anything that needs attention.
List the relevant items in Docugenerate, group them by priority, and recommend what OpenClaw should do next.
Use Docugenerate to template get or list and walk me through the result in plain English.
ClawLink vs. building it yourself
The alternative to ClawLink is usually manual API key setup plus your own token handling, permission troubleshooting, and tool plumbing for OpenClaw. That is fine if you want to build and maintain the integration yourself. Most teams just want Docugenerate working from chat.
| Manual | ClawLink | |
|---|---|---|
| Credential handling | Collect, validate, store, and rotate the Docugenerate API key yourself, then make sure every tool call uses the right account. | Users complete the hosted ClawLink setup once and the connected Docugenerate account becomes available to the agent without you building credential management. |
| Ongoing maintenance | You own refresh logic, permission debugging, environment config, and every provider-specific edge case for Docugenerate. | ClawLink handles the repetitive integration plumbing so your team can focus on the workflow instead of the infrastructure. |
| Agent usability | You still need to expose the right Docugenerate actions to the runtime in a format your agent can reliably use. | 9 tools for Docugenerate are already exposed through ClawLink, so the agent can read and act from chat immediately. |
ClawLink vs. Composio
Composio also exposes Docugenerate to AI agents. It is developer infrastructure: Python and TypeScript SDKs, an MCP server, and a catalog past 1,000 apps, aimed at teams shipping agent products. ClawLink is built for OpenClaw users instead. You install the plugin once, connect Docugenerate in the browser, and the 9 tools above work from chat. There is no SDK and no config file, and the Docugenerate key you paste at setup is stored server-side rather than kept in your environment. Choosing between them? Read the full Composio alternatives comparison.
Troubleshooting
OpenClaw installed the Docugenerate skill but can't call the tools
The ClawHub skill teaches OpenClaw about Docugenerate, but the calls run through the ClawLink plugin and your connected account. Make sure Docugenerate is connected in the dashboard, then start a fresh chat so OpenClaw reloads the tool catalog. If OpenClaw runs as a persistent gateway, restart it so the new tools register.
Connection succeeds but no tools appear
Reconnect Docugenerate from the dashboard, then start a fresh chat if the runtime still has the old tool catalog loaded.
"Tool schema not loaded yet" error when calling Docugenerate tools
Docugenerate tool schemas load on demand the first time a tool runs and are cached after that, so this error usually clears on its own: wait a few seconds and retry the same request. If every Docugenerate call keeps failing with it in a fresh chat, reconnect from the dashboard, and contact support if it still persists — that pattern points to a configuration problem on our side, not something you can fix by reconnecting again.
Docugenerate returns 403 or "permission denied" on one action while others work
Two usual causes. The connected account may not have access to the specific workspace, inbox, store, or project in the request — check that first. If access looks right, the agent may have sent a placeholder value (like "YOUR_ID" or an example id from documentation) instead of a real one: ask it to run a list or search tool first, then retry the action with a real id from those results. Most failures at this stage are one of these two, not ClawLink bugs.
API key setup works but results look incomplete
Double-check that the API key for Docugenerate has the right scopes or account access. A valid key can still be too limited for some reads or writes.
FAQ
Is there a OpenClaw Docugenerate integration?
Yes. ClawLink is the fastest way to connect OpenClaw to Docugenerate: link your Docugenerate account once in the browser and OpenClaw can call the Docugenerate API through 9 ready-made tools — no custom code or token handling.
How do I add Docugenerate to OpenClaw with ClawLink?
Paste the setup prompt from this page into OpenClaw. It installs the ClawLink Docugenerate skill from ClawHub, then you click Connect in the dashboard to authorize Docugenerate. OpenClaw calls the tools from the next message — no config files, and the Docugenerate key you paste is stored server-side instead of in your environment.
How long does it take to connect Docugenerate to OpenClaw?
About two minutes. Sign in, click Connect next to Docugenerate in the dashboard, authenticate, and OpenClaw can use it from the next chat message.
Why use ClawLink instead of wiring Docugenerate up myself?
The alternative to ClawLink is usually manual API key setup plus your own token handling, permission troubleshooting, and tool plumbing for OpenClaw. That is fine if you want to build and maintain the integration yourself. Most teams just want Docugenerate working from chat.
OpenClaw installed the Docugenerate skill but can't call the tools
The ClawHub skill teaches OpenClaw about Docugenerate, but the calls run through the ClawLink plugin and your connected account. Make sure Docugenerate is connected in the dashboard, then start a fresh chat so OpenClaw reloads the tool catalog. If OpenClaw runs as a persistent gateway, restart it so the new tools register.
Related
GitHub
Manage repositories, issues, pull requests, and workflows
PagerDuty tools
Manage incidents, on-call schedules, and services
SafetyCulture
SafetyCulture (formerly iAuditor) is a workplace operations platform that enables teams to conduct digital inspections, manage audits, track issues, schedule tasks, and maintain compliance through mobile and web applications.