How to connect Seam to OpenClaw
Connect Seam to OpenClaw with ClawLink: paste your Seam key once and 10 tools work from chat. No MCP server to run, nothing stored on your machine.
SeamAPI KEYMCPControl smart locks, access systems, thermostats, sensors, and other connected devices in a Seam workspace.. Once connected, OpenClaw can read and act on Seam from chat — pairing, token refresh, and tool wiring handled for you.
The usual route to Seam access for OpenClaw is an MCP server you configure and keep running, plus your own OAuth app or API keys. ClawLink gives OpenClaw a more practical Seam setup: install one ClawHub skill, connect Seam in the browser, and OpenClaw can call real Seam actions from any chat surface with no auth, token refresh, or tool wiring to build yourself.
Setup
It takes three steps to connect OpenClaw to Seam.
1Install the plugin
Paste the setup prompt into OpenClaw, or install from the terminal and ask OpenClaw to pair:
openclaw plugins install clawhub:clawlink-plugin- 2
Connect Seam
Paste your API key in the dashboard.
- 3
Use it from chat
Ask OpenClaw: "What can you do with Seam?"
Install by command
The setup prompt above does all of this in one paste. By hand, it is one install command plus a browser approval:
openclaw plugins install clawhub:clawlink-pluginThen ask OpenClaw to set up ClawLink. It starts browser pairing and prints an approval link — open it, approve the device, return to the chat, and say done. Finally, connect Seam in the ClawLink dashboard — paste your Seam API key once.
Verify the connection by asking OpenClaw:
Pull the relevant data from Seam, summarize it in plain English, and point out anything that needs attention.
Using a different agent?
The OpenClaw plugin is one client of ClawLink's MCP server. Claude Code, Cursor, Codex, or any agent that can run a shell command pairs with the same ClawLink account through the CLI:
npx -y @useclawlink/cli loginlogin opens the same browser approval and stores a credential locally. Once Seam is connected in the dashboard, that agent calls the same 10 Seam tools over MCP. Full setup for MCP clients and shell agents: connect apps to any AI agent.
Seam MCP for OpenClaw
Looking for a Seam MCP server for OpenClaw? ClawLink connects Seam to OpenClaw and exposes 10 Seam tools your agent can call over MCP, with hosted auth and nothing to run or maintain yourself. Using Hermes instead? The Hermes Seam integration works the same way.
What the OpenClaw Seam integration can do
10 Seam tools are ready for OpenClaw once the account is connected. The 9 below are the ones people reach for most; your agent can call all 10.
9 of 10 Seam tools for OpenClaw
| Tool | What it does |
|---|---|
Get access grant seam_get_access_grant | Get one access grant by its Seam UUID or unique workspace key |
List access grants seam_list_access_grants | List access grants in the workspace, optionally filtered by space, device, entrance, user |
List action attempts seam_list_action_attempts | Inspect asynchronous Seam operation status, errors, and results in bulk by action-attempt IDs |
List connected accounts seam_list_connected_accounts | List and search provider accounts connected to the workspace, optionally filtering by space |
List devices seam_list_devices | List and search devices in the workspace, optionally filtering by account, space, IDs, type |
List spaces seam_list_spaces | List and search spaces in the workspace by name, key, or customer, returning one |
Add access methods to grant seam_add_access_methods_to_grant | Request additional PIN, card, mobile-key, or cloud-key methods for an existing access grant |
Create access grant seam_create_access_grant | Grant an existing or new user identity access to spaces, devices, or access-control entrances |
Update access grant seam_update_access_grant | Update an access grant's name or validity window by UUID or unique workspace key |
Try it: find the Seam tool you need
Browse the 9 Seam tools
Click any tool to see exactly what OpenClaw can do and copy a ready-to-use prompt.
Example prompts
Pull the relevant data from Seam, summarize it in plain English, and point out anything that needs attention.
List the relevant items in Seam, group them by priority, and recommend what OpenClaw should do next.
List the relevant items in Seam, group them by priority, and recommend what OpenClaw should do next.
List the relevant items in Seam, group them by priority, and recommend what OpenClaw should do next.
ClawLink vs. building it yourself
The alternative to ClawLink is usually manual API key setup plus your own token handling, permission troubleshooting, and tool plumbing for OpenClaw. That is fine if you want to build and maintain the integration yourself. Most teams just want Seam working from chat.
| Manual | ClawLink | |
|---|---|---|
| Credential handling | Collect, validate, store, and rotate the Seam API key yourself, then make sure every tool call uses the right account. | Users complete the hosted ClawLink setup once and the connected Seam account becomes available to the agent without you building credential management. |
| Ongoing maintenance | You own refresh logic, permission debugging, environment config, and every provider-specific edge case for Seam. | ClawLink handles the repetitive integration plumbing so your team can focus on the workflow instead of the infrastructure. |
| Agent usability | You still need to expose the right Seam actions to the runtime in a format your agent can reliably use. | 10 tools for Seam are already exposed through ClawLink, so the agent can read and act from chat immediately. |
ClawLink vs. Composio
Composio also exposes Seam to AI agents. It is developer infrastructure: Python and TypeScript SDKs, an MCP server, and a catalog past 1,000 apps, aimed at teams shipping agent products. ClawLink is built for OpenClaw users instead. You install the plugin once, connect Seam in the browser, and the 10 tools above work from chat. There is no SDK and no config file, and the Seam key you paste at setup is stored server-side rather than kept in your environment. Choosing between them? Read the full Composio alternatives comparison.
Troubleshooting
OpenClaw installed the Seam skill but can't call the tools
The ClawHub skill teaches OpenClaw about Seam, but the calls run through the ClawLink plugin and your connected account. Make sure Seam is connected in the dashboard, then start a fresh chat so OpenClaw reloads the tool catalog. If OpenClaw runs as a persistent gateway, restart it so the new tools register.
Connection succeeds but no tools appear
Reconnect Seam from the dashboard, then start a fresh chat if the runtime still has the old tool catalog loaded.
"Tool schema not loaded yet" error when calling Seam tools
Seam tool schemas load on demand the first time a tool runs and are cached after that, so this error usually clears on its own: wait a few seconds and retry the same request. If every Seam call keeps failing with it in a fresh chat, reconnect from the dashboard, and contact support if it still persists — that pattern points to a configuration problem on our side, not something you can fix by reconnecting again.
Seam returns 403 or "permission denied" on one action while others work
Two usual causes. The connected account may not have access to the specific workspace, inbox, store, or project in the request — check that first. If access looks right, the agent may have sent a placeholder value (like "YOUR_ID" or an example id from documentation) instead of a real one: ask it to run a list or search tool first, then retry the action with a real id from those results. Most failures at this stage are one of these two, not ClawLink bugs.
API key setup works but results look incomplete
Double-check that the API key for Seam has the right scopes or account access. A valid key can still be too limited for some reads or writes.
FAQ
Is there a OpenClaw Seam integration?
Yes. ClawLink is the fastest way to connect OpenClaw to Seam: link your Seam account once in the browser and OpenClaw can call the Seam API through 10 ready-made tools — no custom code or token handling.
How do I add Seam to OpenClaw with ClawLink?
Paste the setup prompt from this page into OpenClaw. It installs the ClawLink Seam skill from ClawHub, then you click Connect in the dashboard to authorize Seam. OpenClaw calls the tools from the next message — no config files, and the Seam key you paste is stored server-side instead of in your environment.
How long does it take to connect Seam to OpenClaw?
About two minutes. Sign in, click Connect next to Seam in the dashboard, authenticate, and OpenClaw can use it from the next chat message.
Why use ClawLink instead of wiring Seam up myself?
The alternative to ClawLink is usually manual API key setup plus your own token handling, permission troubleshooting, and tool plumbing for OpenClaw. That is fine if you want to build and maintain the integration yourself. Most teams just want Seam working from chat.
OpenClaw installed the Seam skill but can't call the tools
The ClawHub skill teaches OpenClaw about Seam, but the calls run through the ClawLink plugin and your connected account. Make sure Seam is connected in the dashboard, then start a fresh chat so OpenClaw reloads the tool catalog. If OpenClaw runs as a persistent gateway, restart it so the new tools register.
Related
Connect GitHub
Manage repositories, issues, pull requests, and workflows
PagerDuty
Manage incidents, on-call schedules, and services
OpenClaw SafetyCulture integration
SafetyCulture (formerly iAuditor) is a workplace operations platform that enables teams to conduct digital inspections, manage audits, track issues, schedule tasks, and maintain compliance through mobile and web applications.