How to connect Signpath to OpenClaw
Connect Signpath to OpenClaw with ClawLink: paste your Signpath key once and 5 tools work from chat. No MCP server to run, nothing stored on your machine.
SignpathAPI KEYMCPSignPath is a code signing service that integrates with your build system to automate the signing of your software artifacts, ensuring their authenticity and integrity.. Once connected, OpenClaw can read and act on Signpath from chat — pairing, token refresh, and tool wiring handled for you.
The usual route to Signpath access for OpenClaw is an MCP server you configure and keep running, plus your own OAuth app or API keys. ClawLink gives OpenClaw a more practical Signpath setup: install one ClawHub skill, connect Signpath in the browser, and OpenClaw can call real Signpath actions from any chat surface with no auth, token refresh, or tool wiring to build yourself.
Setup
It takes three steps to connect OpenClaw to Signpath.
1Install the plugin
Paste the setup prompt into OpenClaw, or install from the terminal and ask OpenClaw to pair:
openclaw plugins install clawhub:clawlink-plugin- 2
Connect Signpath
Paste your API key in the dashboard.
- 3
Use it from chat
Ask OpenClaw: "What can you do with Signpath?"
Install by command
The setup prompt above does all of this in one paste. By hand, it is one install command plus a browser approval:
openclaw plugins install clawhub:clawlink-pluginThen ask OpenClaw to set up ClawLink. It starts browser pairing and prints an approval link — open it, approve the device, return to the chat, and say done. Finally, connect Signpath in the ClawLink dashboard — paste your Signpath API key once.
Verify the connection by asking OpenClaw:
Pull the relevant data from Signpath, summarize it in plain English, and point out anything that needs attention.
Using a different agent?
The OpenClaw plugin is one client of ClawLink's MCP server. Claude Code, Cursor, Codex, or any agent that can run a shell command pairs with the same ClawLink account through the CLI:
npx -y @useclawlink/cli loginlogin opens the same browser approval and stores a credential locally. Once Signpath is connected in the dashboard, that agent calls the same 5 Signpath tools over MCP. Full setup for MCP clients and shell agents: connect apps to any AI agent.
Signpath MCP for OpenClaw
Looking for a Signpath MCP server for OpenClaw? ClawLink connects Signpath to OpenClaw and exposes 5 Signpath tools your agent can call over MCP, with hosted auth and nothing to run or maintain yourself. Using Hermes instead? The Hermes Signpath integration works the same way.
What the OpenClaw Signpath integration can do
5 Signpath tools are ready for OpenClaw once the account is connected.
All 5 Signpath tools for OpenClaw
| Tool | What it does |
|---|---|
Get health check signpath_get_health_check | Check if the SignPath API is healthy and operational |
List certificates signpath_list_certificates | Retrieve all certificates available in a SignPath organization |
List projects signpath_list_projects | List all projects for an organization |
Retrieve signing policy details signpath_retrieve_signing_policy_details | Retrieve signing policy details for code signing operations |
Retrieve system info signpath_retrieve_system_info | Retrieves SignPath system information including the application version and the web UI base URL |
Try it: find the Signpath tool you need
Browse the 5 Signpath tools
Click any tool to see exactly what OpenClaw can do and copy a ready-to-use prompt.
Example prompts
Pull the relevant data from Signpath, summarize it in plain English, and point out anything that needs attention.
List the relevant items in Signpath, group them by priority, and recommend what OpenClaw should do next.
List the relevant items in Signpath, group them by priority, and recommend what OpenClaw should do next.
Pull the relevant data from Signpath, summarize it in plain English, and point out anything that needs attention.
ClawLink vs. building it yourself
The alternative to ClawLink is usually manual API key setup plus your own token handling, permission troubleshooting, and tool plumbing for OpenClaw. That is fine if you want to build and maintain the integration yourself. Most teams just want Signpath working from chat.
| Manual | ClawLink | |
|---|---|---|
| Credential handling | Collect, validate, store, and rotate the Signpath API key yourself, then make sure every tool call uses the right account. | Users complete the hosted ClawLink setup once and the connected Signpath account becomes available to the agent without you building credential management. |
| Ongoing maintenance | You own refresh logic, permission debugging, environment config, and every provider-specific edge case for Signpath. | ClawLink handles the repetitive integration plumbing so your team can focus on the workflow instead of the infrastructure. |
| Agent usability | You still need to expose the right Signpath actions to the runtime in a format your agent can reliably use. | 5 tools for Signpath are already exposed through ClawLink, so the agent can read and act from chat immediately. |
ClawLink vs. Composio
Composio also exposes Signpath to AI agents. It is developer infrastructure: Python and TypeScript SDKs, an MCP server, and a catalog past 1,000 apps, aimed at teams shipping agent products. ClawLink is built for OpenClaw users instead. You install the plugin once, connect Signpath in the browser, and the 5 tools above work from chat. There is no SDK and no config file, and the Signpath key you paste at setup is stored server-side rather than kept in your environment. Choosing between them? Read the full Composio alternatives comparison.
Troubleshooting
OpenClaw installed the Signpath skill but can't call the tools
The ClawHub skill teaches OpenClaw about Signpath, but the calls run through the ClawLink plugin and your connected account. Make sure Signpath is connected in the dashboard, then start a fresh chat so OpenClaw reloads the tool catalog. If OpenClaw runs as a persistent gateway, restart it so the new tools register.
Connection succeeds but no tools appear
Reconnect Signpath from the dashboard, then start a fresh chat if the runtime still has the old tool catalog loaded.
"Tool schema not loaded yet" error when calling Signpath tools
Signpath tool schemas load on demand the first time a tool runs and are cached after that, so this error usually clears on its own: wait a few seconds and retry the same request. If every Signpath call keeps failing with it in a fresh chat, reconnect from the dashboard, and contact support if it still persists — that pattern points to a configuration problem on our side, not something you can fix by reconnecting again.
Signpath returns 403 or "permission denied" on one action while others work
Two usual causes. The connected account may not have access to the specific workspace, inbox, store, or project in the request — check that first. If access looks right, the agent may have sent a placeholder value (like "YOUR_ID" or an example id from documentation) instead of a real one: ask it to run a list or search tool first, then retry the action with a real id from those results. Most failures at this stage are one of these two, not ClawLink bugs.
API key setup works but results look incomplete
Double-check that the API key for Signpath has the right scopes or account access. A valid key can still be too limited for some reads or writes.
FAQ
Is there a OpenClaw Signpath integration?
Yes. ClawLink is the fastest way to connect OpenClaw to Signpath: link your Signpath account once in the browser and OpenClaw can call the Signpath API through 5 ready-made tools — no custom code or token handling.
How do I add Signpath to OpenClaw with ClawLink?
Paste the setup prompt from this page into OpenClaw. It installs the ClawLink Signpath skill from ClawHub, then you click Connect in the dashboard to authorize Signpath. OpenClaw calls the tools from the next message — no config files, and the Signpath key you paste is stored server-side instead of in your environment.
How long does it take to connect Signpath to OpenClaw?
About two minutes. Sign in, click Connect next to Signpath in the dashboard, authenticate, and OpenClaw can use it from the next chat message.
Why use ClawLink instead of wiring Signpath up myself?
The alternative to ClawLink is usually manual API key setup plus your own token handling, permission troubleshooting, and tool plumbing for OpenClaw. That is fine if you want to build and maintain the integration yourself. Most teams just want Signpath working from chat.
OpenClaw installed the Signpath skill but can't call the tools
The ClawHub skill teaches OpenClaw about Signpath, but the calls run through the ClawLink plugin and your connected account. Make sure Signpath is connected in the dashboard, then start a fresh chat so OpenClaw reloads the tool catalog. If OpenClaw runs as a persistent gateway, restart it so the new tools register.
Related
GitHub
Manage repositories, issues, pull requests, and workflows
PagerDuty
Manage incidents, on-call schedules, and services
SafetyCulture
SafetyCulture (formerly iAuditor) is a workplace operations platform that enables teams to conduct digital inspections, manage audits, track issues, schedule tasks, and maintain compliance through mobile and web applications.