How to connect DEV Community to OpenClaw
Connect DEV Community to OpenClaw with ClawLink: paste your DEV Community key once and 28 tools work from chat. No MCP server to run, nothing stored on your machine.
DEV CommunityAPI KEYMCPDEV Community (dev.to) is a community of software developers where you can publish articles, engage with others, and build your online presence.. Once connected, OpenClaw can read and act on DEV Community from chat — pairing, token refresh, and tool wiring handled for you.
The usual route to DEV Community access for OpenClaw is an MCP server you configure and keep running, plus your own OAuth app or API keys. ClawLink gives OpenClaw a more practical DEV Community setup: install one ClawHub skill, connect DEV Community in the browser, and OpenClaw can call real DEV Community actions from any chat surface with no auth, token refresh, or tool wiring to build yourself.
Setup
It takes three steps to connect OpenClaw to DEV Community.
1Install the plugin
Paste the setup prompt into OpenClaw, or install from the terminal and ask OpenClaw to pair:
openclaw plugins install clawhub:clawlink-plugin- 2
Connect DEV Community
Paste your API key in the dashboard.
- 3
Use it from chat
Ask OpenClaw: "What can you do with DEV Community?"
Install by command
The setup prompt above does all of this in one paste. By hand, it is one install command plus a browser approval:
openclaw plugins install clawhub:clawlink-pluginThen ask OpenClaw to set up ClawLink. It starts browser pairing and prints an approval link — open it, approve the device, return to the chat, and say done. Finally, connect DEV Community in the ClawLink dashboard — paste your DEV Community API key once.
Verify the connection by asking OpenClaw:
Pull the relevant data from DEV Community, summarize it in plain English, and point out anything that needs attention.
Using a different agent?
The OpenClaw plugin is one client of ClawLink's MCP server. Claude Code, Cursor, Codex, or any agent that can run a shell command pairs with the same ClawLink account through the CLI:
npx -y @useclawlink/cli loginlogin opens the same browser approval and stores a credential locally. Once DEV Community is connected in the dashboard, that agent calls the same 28 DEV Community tools over MCP. Full setup for MCP clients and shell agents: connect apps to any AI agent.
DEV Community MCP for OpenClaw
Looking for a DEV Community MCP server for OpenClaw? ClawLink connects DEV Community to OpenClaw and exposes 28 DEV Community tools your agent can call over MCP, with hosted auth and nothing to run or maintain yourself. Using Hermes instead? The Hermes DEV Community integration works the same way.
What the OpenClaw DEV Community integration can do
28 DEV Community tools are ready for OpenClaw once the account is connected.
All 28 DEV Community tools for OpenClaw
| Tool | What it does |
|---|---|
Get article devto_get_article | Returns a single published article by its ID, including full body content |
Get article by path devto_get_article_by_path | Returns a single published article by username and slug path |
Get comment devto_get_comment | Returns a single comment and its descendants (replies) by comment ID |
Get current user devto_get_current_user | Get the currently authenticated user's profile information |
Get listing devto_get_listing | Returns a single classified listing by its ID |
Get organization devto_get_organization | Returns a single organization by its username |
Get profile image devto_get_profile_image | Returns the profile image URL for a user or organization by username |
Get user devto_get_user | Get a single user by their ID or username |
List articles devto_list_articles | Returns a list of published articles, optionally filtered by tags, username, state, or top |
List comments devto_list_comments | List comments for a specified article or podcast episode on DEV Community |
List followed tags devto_list_followed_tags | Returns a list of tags followed by the authenticated user |
List followers devto_list_followers | Retrieve a list of users who follow the authenticated user |
List latest articles devto_list_latest_articles | Retrieve a list of published articles sorted by descending publish date |
List listings devto_list_listings | Returns a list of classified listings for jobs, mentors, products, etc |
List listings by category devto_list_listings_by_category | Returns a list of classified listings filtered by category |
List organization articles devto_list_organization_articles | List articles published by a specific organization on DEV.to |
List organization users devto_list_organization_users | List users belonging to a specified organization on DEV.to |
List podcast episodes devto_list_podcast_episodes | Retrieve a list of podcast episodes from DEV.to |
List reading list devto_list_reading_list | Returns the articles in the authenticated user's reading list |
List tags devto_list_tags | Returns a list of tags with their names, background colors, and text colors |
List user all articles devto_list_user_all_articles | List all articles (both published and unpublished) for the authenticated user |
List user articles devto_list_user_articles | List published articles for the authenticated user |
List user published articles devto_list_user_published_articles | Returns a list of the authenticated user's published articles only |
List user unpublished articles devto_list_user_unpublished_articles | Returns a list of the authenticated user's unpublished (draft) articles |
List videos devto_list_videos | Retrieve a list of articles that contain videos |
Create article devto_create_article | Create a new article on DEV Community |
Update article devto_update_article | Update an existing article on DEV Community |
Update listing devto_update_listing | Updates an existing classified listing on DEV Community |
Try it: find the DEV Community tool you need
Browse the 28 DEV Community tools
Click any tool to see exactly what OpenClaw can do and copy a ready-to-use prompt.
Example prompts
Pull the relevant data from DEV Community, summarize it in plain English, and point out anything that needs attention.
Pull the relevant data from DEV Community, summarize it in plain English, and point out anything that needs attention.
Pull the relevant data from DEV Community, summarize it in plain English, and point out anything that needs attention.
Pull the relevant data from DEV Community, summarize it in plain English, and point out anything that needs attention.
ClawLink vs. building it yourself
The alternative to ClawLink is usually manual API key setup plus your own token handling, permission troubleshooting, and tool plumbing for OpenClaw. That is fine if you want to build and maintain the integration yourself. Most teams just want DEV Community working from chat.
| Manual | ClawLink | |
|---|---|---|
| Credential handling | Collect, validate, store, and rotate the DEV Community API key yourself, then make sure every tool call uses the right account. | Users complete the hosted ClawLink setup once and the connected DEV Community account becomes available to the agent without you building credential management. |
| Ongoing maintenance | You own refresh logic, permission debugging, environment config, and every provider-specific edge case for DEV Community. | ClawLink handles the repetitive integration plumbing so your team can focus on the workflow instead of the infrastructure. |
| Agent usability | You still need to expose the right DEV Community actions to the runtime in a format your agent can reliably use. | 28 tools for DEV Community are already exposed through ClawLink, so the agent can read and act from chat immediately. |
ClawLink vs. Composio
Composio also exposes DEV Community to AI agents. It is developer infrastructure: Python and TypeScript SDKs, an MCP server, and a catalog past 1,000 apps, aimed at teams shipping agent products. ClawLink is built for OpenClaw users instead. You install the plugin once, connect DEV Community in the browser, and the 28 tools above work from chat. There is no SDK and no config file, and the DEV Community key you paste at setup is stored server-side rather than kept in your environment. Choosing between them? Read the full Composio alternatives comparison.
Troubleshooting
OpenClaw installed the DEV Community skill but can't call the tools
The ClawHub skill teaches OpenClaw about DEV Community, but the calls run through the ClawLink plugin and your connected account. Make sure DEV Community is connected in the dashboard, then start a fresh chat so OpenClaw reloads the tool catalog. If OpenClaw runs as a persistent gateway, restart it so the new tools register.
Connection succeeds but no tools appear
Reconnect DEV Community from the dashboard, then start a fresh chat if the runtime still has the old tool catalog loaded.
"Tool schema not loaded yet" error when calling DEV Community tools
DEV Community tool schemas load on demand the first time a tool runs and are cached after that, so this error usually clears on its own: wait a few seconds and retry the same request. If every DEV Community call keeps failing with it in a fresh chat, reconnect from the dashboard, and contact support if it still persists — that pattern points to a configuration problem on our side, not something you can fix by reconnecting again.
DEV Community returns 403 or "permission denied" on one action while others work
Two usual causes. The connected account may not have access to the specific workspace, inbox, store, or project in the request — check that first. If access looks right, the agent may have sent a placeholder value (like "YOUR_ID" or an example id from documentation) instead of a real one: ask it to run a list or search tool first, then retry the action with a real id from those results. Most failures at this stage are one of these two, not ClawLink bugs.
API key setup works but results look incomplete
Double-check that the API key for DEV Community has the right scopes or account access. A valid key can still be too limited for some reads or writes.
FAQ
Is there a OpenClaw DEV Community integration?
Yes. ClawLink is the fastest way to connect OpenClaw to DEV Community: link your DEV Community account once in the browser and OpenClaw can call the DEV Community API through 28 ready-made tools — no custom code or token handling.
How do I add DEV Community to OpenClaw with ClawLink?
Paste the setup prompt from this page into OpenClaw. It installs the ClawLink DEV Community skill from ClawHub, then you click Connect in the dashboard to authorize DEV Community. OpenClaw calls the tools from the next message — no config files, and the DEV Community key you paste is stored server-side instead of in your environment.
How long does it take to connect DEV Community to OpenClaw?
About two minutes. Sign in, click Connect next to DEV Community in the dashboard, authenticate, and OpenClaw can use it from the next chat message.
Why use ClawLink instead of wiring DEV Community up myself?
The alternative to ClawLink is usually manual API key setup plus your own token handling, permission troubleshooting, and tool plumbing for OpenClaw. That is fine if you want to build and maintain the integration yourself. Most teams just want DEV Community working from chat.
OpenClaw installed the DEV Community skill but can't call the tools
The ClawHub skill teaches OpenClaw about DEV Community, but the calls run through the ClawLink plugin and your connected account. Make sure DEV Community is connected in the dashboard, then start a fresh chat so OpenClaw reloads the tool catalog. If OpenClaw runs as a persistent gateway, restart it so the new tools register.
Related
GitHub tools
Manage repositories, issues, pull requests, and workflows
Connect PagerDuty
Manage incidents, on-call schedules, and services
Connect SafetyCulture
SafetyCulture (formerly iAuditor) is a workplace operations platform that enables teams to conduct digital inspections, manage audits, track issues, schedule tasks, and maintain compliance through mobile and web applications.