How to connect Shorten.REST to OpenClaw
Connect Shorten.REST to OpenClaw with ClawLink: paste your Shorten.REST key once and 6 tools work from chat. No MCP server to run, nothing stored on your machine.
Shorten.RESTAPI KEYMCPShorten.REST is a link shortening and management app that allows you to generate unique, branded URLs with advanced tracking capabilities.. Once connected, OpenClaw can read and act on Shorten.REST from chat — pairing, token refresh, and tool wiring handled for you.
The usual route to Shorten.REST access for OpenClaw is an MCP server you configure and keep running, plus your own OAuth app or API keys. ClawLink gives OpenClaw a more practical Shorten.REST setup: install one ClawHub skill, connect Shorten.REST in the browser, and OpenClaw can call real Shorten.REST actions from any chat surface with no auth, token refresh, or tool wiring to build yourself.
Setup
It takes three steps to connect OpenClaw to Shorten.REST.
1Install the plugin
Paste the setup prompt into OpenClaw, or install from the terminal and ask OpenClaw to pair:
openclaw plugins install clawhub:clawlink-plugin- 2
Connect Shorten.REST
Paste your API key in the dashboard.
- 3
Use it from chat
Ask OpenClaw: "What can you do with Shorten.REST?"
Install by command
The setup prompt above does all of this in one paste. By hand, it is one install command plus a browser approval:
openclaw plugins install clawhub:clawlink-pluginThen ask OpenClaw to set up ClawLink. It starts browser pairing and prints an approval link — open it, approve the device, return to the chat, and say done. Finally, connect Shorten.REST in the ClawLink dashboard — paste your Shorten.REST API key once.
Verify the connection by asking OpenClaw:
Pull the relevant data from Shorten.REST, summarize it in plain English, and point out anything that needs attention.
Using a different agent?
The OpenClaw plugin is one client of ClawLink's MCP server. Claude Code, Cursor, Codex, or any agent that can run a shell command pairs with the same ClawLink account through the CLI:
npx -y @useclawlink/cli loginlogin opens the same browser approval and stores a credential locally. Once Shorten.REST is connected in the dashboard, that agent calls the same 6 Shorten.REST tools over MCP. Full setup for MCP clients and shell agents: connect apps to any AI agent.
Shorten.REST MCP for OpenClaw
Looking for a Shorten.REST MCP server for OpenClaw? ClawLink connects Shorten.REST to OpenClaw and exposes 6 Shorten.REST tools your agent can call over MCP, with hosted auth and nothing to run or maintain yourself. Using Hermes instead? The Hermes Shorten.REST integration works the same way.
What the OpenClaw Shorten.REST integration can do
6 Shorten.REST tools are ready for OpenClaw once the account is connected. The 5 below are the ones people reach for most; your agent can call all 6.
5 of 6 Shorten.REST tools for OpenClaw
| Tool | What it does |
|---|---|
Get aliases shorten_rest_get_aliases | Retrieve all URL aliases of the authenticated user |
Get clicks shorten_rest_get_clicks | Retrieve click data for shortened URLs |
List aliases by domain shorten_rest_list_aliases_by_domain | Retrieve all alias names associated with your account and a given domain |
Create alias shorten_rest_create_alias | Create a new alias (short URL) under a specified domain |
Update alias shorten_rest_update_alias | Update an existing short URL alias by providing its alias name and domain |
Try it: find the Shorten.REST tool you need
Browse the 5 Shorten.REST tools
Click any tool to see exactly what OpenClaw can do and copy a ready-to-use prompt.
Example prompts
Pull the relevant data from Shorten.REST, summarize it in plain English, and point out anything that needs attention.
Pull the relevant data from Shorten.REST, summarize it in plain English, and point out anything that needs attention.
List the relevant items in Shorten.REST, group them by priority, and recommend what OpenClaw should do next.
Create it in Shorten.REST for me, then confirm the important fields before you finish.
ClawLink vs. building it yourself
The alternative to ClawLink is usually manual API key setup plus your own token handling, permission troubleshooting, and tool plumbing for OpenClaw. That is fine if you want to build and maintain the integration yourself. Most teams just want Shorten.REST working from chat.
| Manual | ClawLink | |
|---|---|---|
| Credential handling | Collect, validate, store, and rotate the Shorten.REST API key yourself, then make sure every tool call uses the right account. | Users complete the hosted ClawLink setup once and the connected Shorten.REST account becomes available to the agent without you building credential management. |
| Ongoing maintenance | You own refresh logic, permission debugging, environment config, and every provider-specific edge case for Shorten.REST. | ClawLink handles the repetitive integration plumbing so your team can focus on the workflow instead of the infrastructure. |
| Agent usability | You still need to expose the right Shorten.REST actions to the runtime in a format your agent can reliably use. | 6 tools for Shorten.REST are already exposed through ClawLink, so the agent can read and act from chat immediately. |
ClawLink vs. Composio
Composio also exposes Shorten.REST to AI agents. It is developer infrastructure: Python and TypeScript SDKs, an MCP server, and a catalog past 1,000 apps, aimed at teams shipping agent products. ClawLink is built for OpenClaw users instead. You install the plugin once, connect Shorten.REST in the browser, and the 6 tools above work from chat. There is no SDK and no config file, and the Shorten.REST key you paste at setup is stored server-side rather than kept in your environment. Choosing between them? Read the full Composio alternatives comparison.
Troubleshooting
OpenClaw installed the Shorten.REST skill but can't call the tools
The ClawHub skill teaches OpenClaw about Shorten.REST, but the calls run through the ClawLink plugin and your connected account. Make sure Shorten.REST is connected in the dashboard, then start a fresh chat so OpenClaw reloads the tool catalog. If OpenClaw runs as a persistent gateway, restart it so the new tools register.
Connection succeeds but no tools appear
Reconnect Shorten.REST from the dashboard, then start a fresh chat if the runtime still has the old tool catalog loaded.
"Tool schema not loaded yet" error when calling Shorten.REST tools
Shorten.REST tool schemas load on demand the first time a tool runs and are cached after that, so this error usually clears on its own: wait a few seconds and retry the same request. If every Shorten.REST call keeps failing with it in a fresh chat, reconnect from the dashboard, and contact support if it still persists — that pattern points to a configuration problem on our side, not something you can fix by reconnecting again.
Shorten.REST returns 403 or "permission denied" on one action while others work
Two usual causes. The connected account may not have access to the specific workspace, inbox, store, or project in the request — check that first. If access looks right, the agent may have sent a placeholder value (like "YOUR_ID" or an example id from documentation) instead of a real one: ask it to run a list or search tool first, then retry the action with a real id from those results. Most failures at this stage are one of these two, not ClawLink bugs.
API key setup works but results look incomplete
Double-check that the API key for Shorten.REST has the right scopes or account access. A valid key can still be too limited for some reads or writes.
FAQ
Is there a OpenClaw Shorten.REST integration?
Yes. ClawLink is the fastest way to connect OpenClaw to Shorten.REST: link your Shorten.REST account once in the browser and OpenClaw can call the Shorten.REST API through 6 ready-made tools — no custom code or token handling.
How do I add Shorten.REST to OpenClaw with ClawLink?
Paste the setup prompt from this page into OpenClaw. It installs the ClawLink Shorten.REST skill from ClawHub, then you click Connect in the dashboard to authorize Shorten.REST. OpenClaw calls the tools from the next message — no config files, and the Shorten.REST key you paste is stored server-side instead of in your environment.
How long does it take to connect Shorten.REST to OpenClaw?
About two minutes. Sign in, click Connect next to Shorten.REST in the dashboard, authenticate, and OpenClaw can use it from the next chat message.
Why use ClawLink instead of wiring Shorten.REST up myself?
The alternative to ClawLink is usually manual API key setup plus your own token handling, permission troubleshooting, and tool plumbing for OpenClaw. That is fine if you want to build and maintain the integration yourself. Most teams just want Shorten.REST working from chat.
OpenClaw installed the Shorten.REST skill but can't call the tools
The ClawHub skill teaches OpenClaw about Shorten.REST, but the calls run through the ClawLink plugin and your connected account. Make sure Shorten.REST is connected in the dashboard, then start a fresh chat so OpenClaw reloads the tool catalog. If OpenClaw runs as a persistent gateway, restart it so the new tools register.
Related
Connect GitHub
Manage repositories, issues, pull requests, and workflows
PagerDuty
Manage incidents, on-call schedules, and services
OpenClaw SafetyCulture integration
SafetyCulture (formerly iAuditor) is a workplace operations platform that enables teams to conduct digital inspections, manage audits, track issues, schedule tasks, and maintain compliance through mobile and web applications.