How to connect Docsautomator to OpenClaw
Connect Docsautomator to OpenClaw with ClawLink: paste your Docsautomator key once and 9 tools work from chat. No MCP server to run, nothing stored on your machine.
DocsautomatorAPI KEYMCPAutomate your documents using Google Docs in minutes.. Once connected, OpenClaw can read and act on Docsautomator from chat — pairing, token refresh, and tool wiring handled for you.
The usual route to Docsautomator access for OpenClaw is an MCP server you configure and keep running, plus your own OAuth app or API keys. ClawLink gives OpenClaw a more practical Docsautomator setup: install one ClawHub skill, connect Docsautomator in the browser, and OpenClaw can call real Docsautomator actions from any chat surface with no auth, token refresh, or tool wiring to build yourself.
Setup
It takes three steps to connect OpenClaw to Docsautomator.
1Install the plugin
Paste the setup prompt into OpenClaw, or install from the terminal and ask OpenClaw to pair:
openclaw plugins install clawhub:clawlink-plugin- 2
Connect Docsautomator
Paste your API key in the dashboard.
- 3
Use it from chat
Ask OpenClaw: "What can you do with Docsautomator?"
Install by command
The setup prompt above does all of this in one paste. By hand, it is one install command plus a browser approval:
openclaw plugins install clawhub:clawlink-pluginThen ask OpenClaw to set up ClawLink. It starts browser pairing and prints an approval link — open it, approve the device, return to the chat, and say done. Finally, connect Docsautomator in the ClawLink dashboard — paste your Docsautomator API key once.
Verify the connection by asking OpenClaw:
Pull the relevant data from Docsautomator, summarize it in plain English, and point out anything that needs attention.
Using a different agent?
The OpenClaw plugin is one client of ClawLink's MCP server. Claude Code, Cursor, Codex, or any agent that can run a shell command pairs with the same ClawLink account through the CLI:
npx -y @useclawlink/cli loginlogin opens the same browser approval and stores a credential locally. Once Docsautomator is connected in the dashboard, that agent calls the same 9 Docsautomator tools over MCP. Full setup for MCP clients and shell agents: connect apps to any AI agent.
Docsautomator MCP for OpenClaw
Looking for a Docsautomator MCP server for OpenClaw? ClawLink connects Docsautomator to OpenClaw and exposes 9 Docsautomator tools your agent can call over MCP, with hosted auth and nothing to run or maintain yourself. Using Hermes instead? The Hermes Docsautomator integration works the same way.
What the OpenClaw Docsautomator integration can do
9 Docsautomator tools are ready for OpenClaw once the account is connected. The 8 below are the ones people reach for most; your agent can call all 9.
8 of 9 Docsautomator tools for OpenClaw
| Tool | What it does |
|---|---|
Get automation docsautomator_get_automation | Retrieve details of a specific automation by its ID |
Get queue stats docsautomator_get_queue_stats | Retrieve current document generation queue statistics for your workspace |
List automations docsautomator_list_automations | Retrieve all automations in your workspace with their basic details |
List signing sessions docsautomator_list_signing_sessions | Retrieve signing sessions with optional filtering by status or signer email |
Create automation docsautomator_create_automation | Create a new DocsAutomator automation with specified data source and optional Google Doc |
Duplicate automation docsautomator_duplicate_automation | Create a copy of an existing automation with ' COPY' appended to the title |
Send test email docsautomator_send_test_email | Send a test email with a sample PDF attachment to verify email configuration |
Update automation docsautomator_update_automation | Update an existing automation's settings in DocsAutomator |
Try it: find the Docsautomator tool you need
Browse the 8 Docsautomator tools
Click any tool to see exactly what OpenClaw can do and copy a ready-to-use prompt.
Example prompts
Pull the relevant data from Docsautomator, summarize it in plain English, and point out anything that needs attention.
Pull the relevant data from Docsautomator, summarize it in plain English, and point out anything that needs attention.
List the relevant items in Docsautomator, group them by priority, and recommend what OpenClaw should do next.
List the relevant items in Docsautomator, group them by priority, and recommend what OpenClaw should do next.
ClawLink vs. building it yourself
The alternative to ClawLink is usually manual API key setup plus your own token handling, permission troubleshooting, and tool plumbing for OpenClaw. That is fine if you want to build and maintain the integration yourself. Most teams just want Docsautomator working from chat.
| Manual | ClawLink | |
|---|---|---|
| Credential handling | Collect, validate, store, and rotate the Docsautomator API key yourself, then make sure every tool call uses the right account. | Users complete the hosted ClawLink setup once and the connected Docsautomator account becomes available to the agent without you building credential management. |
| Ongoing maintenance | You own refresh logic, permission debugging, environment config, and every provider-specific edge case for Docsautomator. | ClawLink handles the repetitive integration plumbing so your team can focus on the workflow instead of the infrastructure. |
| Agent usability | You still need to expose the right Docsautomator actions to the runtime in a format your agent can reliably use. | 9 tools for Docsautomator are already exposed through ClawLink, so the agent can read and act from chat immediately. |
ClawLink vs. Composio
Composio also exposes Docsautomator to AI agents. It is developer infrastructure: Python and TypeScript SDKs, an MCP server, and a catalog past 1,000 apps, aimed at teams shipping agent products. ClawLink is built for OpenClaw users instead. You install the plugin once, connect Docsautomator in the browser, and the 9 tools above work from chat. There is no SDK and no config file, and the Docsautomator key you paste at setup is stored server-side rather than kept in your environment. Choosing between them? Read the full Composio alternatives comparison.
Troubleshooting
OpenClaw installed the Docsautomator skill but can't call the tools
The ClawHub skill teaches OpenClaw about Docsautomator, but the calls run through the ClawLink plugin and your connected account. Make sure Docsautomator is connected in the dashboard, then start a fresh chat so OpenClaw reloads the tool catalog. If OpenClaw runs as a persistent gateway, restart it so the new tools register.
Connection succeeds but no tools appear
Reconnect Docsautomator from the dashboard, then start a fresh chat if the runtime still has the old tool catalog loaded.
"Tool schema not loaded yet" error when calling Docsautomator tools
Docsautomator tool schemas load on demand the first time a tool runs and are cached after that, so this error usually clears on its own: wait a few seconds and retry the same request. If every Docsautomator call keeps failing with it in a fresh chat, reconnect from the dashboard, and contact support if it still persists — that pattern points to a configuration problem on our side, not something you can fix by reconnecting again.
Docsautomator returns 403 or "permission denied" on one action while others work
Two usual causes. The connected account may not have access to the specific workspace, inbox, store, or project in the request — check that first. If access looks right, the agent may have sent a placeholder value (like "YOUR_ID" or an example id from documentation) instead of a real one: ask it to run a list or search tool first, then retry the action with a real id from those results. Most failures at this stage are one of these two, not ClawLink bugs.
API key setup works but results look incomplete
Double-check that the API key for Docsautomator has the right scopes or account access. A valid key can still be too limited for some reads or writes.
FAQ
Is there a OpenClaw Docsautomator integration?
Yes. ClawLink is the fastest way to connect OpenClaw to Docsautomator: link your Docsautomator account once in the browser and OpenClaw can call the Docsautomator API through 9 ready-made tools — no custom code or token handling.
How do I add Docsautomator to OpenClaw with ClawLink?
Paste the setup prompt from this page into OpenClaw. It installs the ClawLink Docsautomator skill from ClawHub, then you click Connect in the dashboard to authorize Docsautomator. OpenClaw calls the tools from the next message — no config files, and the Docsautomator key you paste is stored server-side instead of in your environment.
How long does it take to connect Docsautomator to OpenClaw?
About two minutes. Sign in, click Connect next to Docsautomator in the dashboard, authenticate, and OpenClaw can use it from the next chat message.
Why use ClawLink instead of wiring Docsautomator up myself?
The alternative to ClawLink is usually manual API key setup plus your own token handling, permission troubleshooting, and tool plumbing for OpenClaw. That is fine if you want to build and maintain the integration yourself. Most teams just want Docsautomator working from chat.
OpenClaw installed the Docsautomator skill but can't call the tools
The ClawHub skill teaches OpenClaw about Docsautomator, but the calls run through the ClawLink plugin and your connected account. Make sure Docsautomator is connected in the dashboard, then start a fresh chat so OpenClaw reloads the tool catalog. If OpenClaw runs as a persistent gateway, restart it so the new tools register.
Related
OpenClaw GitHub integration
Manage repositories, issues, pull requests, and workflows
Connect PagerDuty
Manage incidents, on-call schedules, and services
SafetyCulture
SafetyCulture (formerly iAuditor) is a workplace operations platform that enables teams to conduct digital inspections, manage audits, track issues, schedule tasks, and maintain compliance through mobile and web applications.