How to connect Pushinator to OpenClaw
Connect Pushinator to OpenClaw with ClawLink: paste your Pushinator key once and 7 tools work from chat. No MCP server to run, nothing stored on your machine.
PushinatorAPI KEYMCPPushinator provides push notification channels for sending real-time alerts to subscribed users and devices.. Once connected, OpenClaw can read and act on Pushinator from chat — pairing, token refresh, and tool wiring handled for you.
The usual route to Pushinator access for OpenClaw is an MCP server you configure and keep running, plus your own OAuth app or API keys. ClawLink gives OpenClaw a more practical Pushinator setup: install one ClawHub skill, connect Pushinator in the browser, and OpenClaw can call real Pushinator actions from any chat surface with no auth, token refresh, or tool wiring to build yourself.
Setup
It takes three steps to connect OpenClaw to Pushinator.
1Install the plugin
Paste the setup prompt into OpenClaw, or install from the terminal and ask OpenClaw to pair:
openclaw plugins install clawhub:clawlink-plugin- 2
Connect Pushinator
Paste your API key in the dashboard.
- 3
Use it from chat
Ask OpenClaw: "What can you do with Pushinator?"
Install by command
The setup prompt above does all of this in one paste. By hand, it is one install command plus a browser approval:
openclaw plugins install clawhub:clawlink-pluginThen ask OpenClaw to set up ClawLink. It starts browser pairing and prints an approval link — open it, approve the device, return to the chat, and say done. Finally, connect Pushinator in the ClawLink dashboard — paste your Pushinator API key once.
Verify the connection by asking OpenClaw:
Pull the relevant data from Pushinator, summarize it in plain English, and point out anything that needs attention.
Using a different agent?
The OpenClaw plugin is one client of ClawLink's MCP server. Claude Code, Cursor, Codex, or any agent that can run a shell command pairs with the same ClawLink account through the CLI:
npx -y @useclawlink/cli loginlogin opens the same browser approval and stores a credential locally. Once Pushinator is connected in the dashboard, that agent calls the same 7 Pushinator tools over MCP. Full setup for MCP clients and shell agents: connect apps to any AI agent.
Pushinator MCP for OpenClaw
Looking for a Pushinator MCP server for OpenClaw? ClawLink connects Pushinator to OpenClaw and exposes 7 Pushinator tools your agent can call over MCP, with hosted auth and nothing to run or maintain yourself. Using Hermes instead? The Hermes Pushinator integration works the same way.
What the OpenClaw Pushinator integration can do
7 Pushinator tools are ready for OpenClaw once the account is connected. The 6 below are the ones people reach for most; your agent can call all 7.
6 of 7 Pushinator tools for OpenClaw
| Tool | What it does |
|---|---|
Get channel pushinator_get_channel | Get one Pushinator notification channel by its channel ID |
Get current user pushinator_get_current_user | Return the Pushinator user associated with the connected API key |
List channels pushinator_list_channels | List every notification channel belonging to the connected Pushinator account |
Create channel pushinator_create_channel | Create a Pushinator notification channel and return its channel ID and properties |
Update channel pushinator_update_channel | Replace the editable name and optional description of an existing Pushinator notification |
Send notification pushinator_send_notification | Send a push notification immediately to all subscribers of a Pushinator channel |
Try it: find the Pushinator tool you need
Browse the 6 Pushinator tools
Click any tool to see exactly what OpenClaw can do and copy a ready-to-use prompt.
Example prompts
Pull the relevant data from Pushinator, summarize it in plain English, and point out anything that needs attention.
Pull the relevant data from Pushinator, summarize it in plain English, and point out anything that needs attention.
List the relevant items in Pushinator, group them by priority, and recommend what OpenClaw should do next.
Create it in Pushinator for me, then confirm the important fields before you finish.
ClawLink vs. building it yourself
The alternative to ClawLink is usually manual API key setup plus your own token handling, permission troubleshooting, and tool plumbing for OpenClaw. That is fine if you want to build and maintain the integration yourself. Most teams just want Pushinator working from chat.
| Manual | ClawLink | |
|---|---|---|
| Credential handling | Collect, validate, store, and rotate the Pushinator API key yourself, then make sure every tool call uses the right account. | Users complete the hosted ClawLink setup once and the connected Pushinator account becomes available to the agent without you building credential management. |
| Ongoing maintenance | You own refresh logic, permission debugging, environment config, and every provider-specific edge case for Pushinator. | ClawLink handles the repetitive integration plumbing so your team can focus on the workflow instead of the infrastructure. |
| Agent usability | You still need to expose the right Pushinator actions to the runtime in a format your agent can reliably use. | 7 tools for Pushinator are already exposed through ClawLink, so the agent can read and act from chat immediately. |
ClawLink vs. Composio
Composio also exposes Pushinator to AI agents. It is developer infrastructure: Python and TypeScript SDKs, an MCP server, and a catalog past 1,000 apps, aimed at teams shipping agent products. ClawLink is built for OpenClaw users instead. You install the plugin once, connect Pushinator in the browser, and the 7 tools above work from chat. There is no SDK and no config file, and the Pushinator key you paste at setup is stored server-side rather than kept in your environment. Choosing between them? Read the full Composio alternatives comparison.
Troubleshooting
OpenClaw installed the Pushinator skill but can't call the tools
The ClawHub skill teaches OpenClaw about Pushinator, but the calls run through the ClawLink plugin and your connected account. Make sure Pushinator is connected in the dashboard, then start a fresh chat so OpenClaw reloads the tool catalog. If OpenClaw runs as a persistent gateway, restart it so the new tools register.
Connection succeeds but no tools appear
Reconnect Pushinator from the dashboard, then start a fresh chat if the runtime still has the old tool catalog loaded.
"Tool schema not loaded yet" error when calling Pushinator tools
Pushinator tool schemas load on demand the first time a tool runs and are cached after that, so this error usually clears on its own: wait a few seconds and retry the same request. If every Pushinator call keeps failing with it in a fresh chat, reconnect from the dashboard, and contact support if it still persists — that pattern points to a configuration problem on our side, not something you can fix by reconnecting again.
Pushinator returns 403 or "permission denied" on one action while others work
Two usual causes. The connected account may not have access to the specific workspace, inbox, store, or project in the request — check that first. If access looks right, the agent may have sent a placeholder value (like "YOUR_ID" or an example id from documentation) instead of a real one: ask it to run a list or search tool first, then retry the action with a real id from those results. Most failures at this stage are one of these two, not ClawLink bugs.
API key setup works but results look incomplete
Double-check that the API key for Pushinator has the right scopes or account access. A valid key can still be too limited for some reads or writes.
FAQ
Is there a OpenClaw Pushinator integration?
Yes. ClawLink is the fastest way to connect OpenClaw to Pushinator: link your Pushinator account once in the browser and OpenClaw can call the Pushinator API through 7 ready-made tools — no custom code or token handling.
How do I add Pushinator to OpenClaw with ClawLink?
Paste the setup prompt from this page into OpenClaw. It installs the ClawLink Pushinator skill from ClawHub, then you click Connect in the dashboard to authorize Pushinator. OpenClaw calls the tools from the next message — no config files, and the Pushinator key you paste is stored server-side instead of in your environment.
How long does it take to connect Pushinator to OpenClaw?
About two minutes. Sign in, click Connect next to Pushinator in the dashboard, authenticate, and OpenClaw can use it from the next chat message.
Why use ClawLink instead of wiring Pushinator up myself?
The alternative to ClawLink is usually manual API key setup plus your own token handling, permission troubleshooting, and tool plumbing for OpenClaw. That is fine if you want to build and maintain the integration yourself. Most teams just want Pushinator working from chat.
OpenClaw installed the Pushinator skill but can't call the tools
The ClawHub skill teaches OpenClaw about Pushinator, but the calls run through the ClawLink plugin and your connected account. Make sure Pushinator is connected in the dashboard, then start a fresh chat so OpenClaw reloads the tool catalog. If OpenClaw runs as a persistent gateway, restart it so the new tools register.
Related
GitHub
Manage repositories, issues, pull requests, and workflows
PagerDuty
Manage incidents, on-call schedules, and services
Connect SafetyCulture
SafetyCulture (formerly iAuditor) is a workplace operations platform that enables teams to conduct digital inspections, manage audits, track issues, schedule tasks, and maintain compliance through mobile and web applications.