How to connect Wufoo to OpenClaw
Connect Wufoo to OpenClaw with ClawLink: paste your Wufoo key once and 7 tools work from chat. No MCP server to run, nothing stored on your machine.
WufooAPI KEYMCPWufoo is an online form builder for collecting entries, managing reports, and integrating form submissions with other services.. Once connected, OpenClaw can read and act on Wufoo from chat — pairing, token refresh, and tool wiring handled for you.
The usual route to Wufoo access for OpenClaw is an MCP server you configure and keep running, plus your own OAuth app or API keys. ClawLink gives OpenClaw a more practical Wufoo setup: install one ClawHub skill, connect Wufoo in the browser, and OpenClaw can call real Wufoo actions from any chat surface with no auth, token refresh, or tool wiring to build yourself.
Setup
It takes three steps to connect OpenClaw to Wufoo.
1Install the plugin
Paste the setup prompt into OpenClaw, or install from the terminal and ask OpenClaw to pair:
openclaw plugins install clawhub:clawlink-plugin- 2
Connect Wufoo
Paste your API key in the dashboard.
- 3
Use it from chat
Ask OpenClaw: "What can you do with Wufoo?"
Install by command
The setup prompt above does all of this in one paste. By hand, it is one install command plus a browser approval:
openclaw plugins install clawhub:clawlink-pluginThen ask OpenClaw to set up ClawLink. It starts browser pairing and prints an approval link — open it, approve the device, return to the chat, and say done. Finally, connect Wufoo in the ClawLink dashboard — paste your Wufoo API key once.
Verify the connection by asking OpenClaw:
Use Wufoo to count entries and walk me through the result in plain English.
Using a different agent?
The OpenClaw plugin is one client of ClawLink's MCP server. Claude Code, Cursor, Codex, or any agent that can run a shell command pairs with the same ClawLink account through the CLI:
npx -y @useclawlink/cli loginlogin opens the same browser approval and stores a credential locally. Once Wufoo is connected in the dashboard, that agent calls the same 7 Wufoo tools over MCP. Full setup for MCP clients and shell agents: connect apps to any AI agent.
Wufoo MCP for OpenClaw
Looking for a Wufoo MCP server for OpenClaw? ClawLink connects Wufoo to OpenClaw and exposes 7 Wufoo tools your agent can call over MCP, with hosted auth and nothing to run or maintain yourself. Using Hermes instead? The Hermes Wufoo integration works the same way.
What the OpenClaw Wufoo integration can do
7 Wufoo tools are ready for OpenClaw once the account is connected.
All 7 Wufoo tools for OpenClaw
| Tool | What it does |
|---|---|
Count entries wufoo_count_entries | Count entries for either a Wufoo form or report without downloading them |
Get fields wufoo_get_fields | Return field definitions and API field IDs for a Wufoo form or for the form underlying a report |
Get form wufoo_get_form | Get metadata for one Wufoo form by its permanent hash or title identifier |
List entries wufoo_list_entries | List entries from a Wufoo form or report |
List form comments wufoo_list_form_comments | List Entry Manager comments for a form or for one entry, one page at a time |
List forms wufoo_list_forms | List forms accessible to the connected Wufoo user and return a cursor for the next page |
List reports wufoo_list_reports | List reports accessible to the connected Wufoo user |
Try it: find the Wufoo tool you need
Browse the 7 Wufoo tools
Click any tool to see exactly what OpenClaw can do and copy a ready-to-use prompt.
Example prompts
Use Wufoo to count entries and walk me through the result in plain English.
Pull the relevant data from Wufoo, summarize it in plain English, and point out anything that needs attention.
Pull the relevant data from Wufoo, summarize it in plain English, and point out anything that needs attention.
List the relevant items in Wufoo, group them by priority, and recommend what OpenClaw should do next.
ClawLink vs. building it yourself
The alternative to ClawLink is usually manual API key setup plus your own token handling, permission troubleshooting, and tool plumbing for OpenClaw. That is fine if you want to build and maintain the integration yourself. Most teams just want Wufoo working from chat.
| Manual | ClawLink | |
|---|---|---|
| Credential handling | Collect, validate, store, and rotate the Wufoo API key yourself, then make sure every tool call uses the right account. | Users complete the hosted ClawLink setup once and the connected Wufoo account becomes available to the agent without you building credential management. |
| Ongoing maintenance | You own refresh logic, permission debugging, environment config, and every provider-specific edge case for Wufoo. | ClawLink handles the repetitive integration plumbing so your team can focus on the workflow instead of the infrastructure. |
| Agent usability | You still need to expose the right Wufoo actions to the runtime in a format your agent can reliably use. | 7 tools for Wufoo are already exposed through ClawLink, so the agent can read and act from chat immediately. |
ClawLink vs. Composio
Composio also exposes Wufoo to AI agents. It is developer infrastructure: Python and TypeScript SDKs, an MCP server, and a catalog past 1,000 apps, aimed at teams shipping agent products. ClawLink is built for OpenClaw users instead. You install the plugin once, connect Wufoo in the browser, and the 7 tools above work from chat. There is no SDK and no config file, and the Wufoo key you paste at setup is stored server-side rather than kept in your environment. Choosing between them? Read the full Composio alternatives comparison.
Troubleshooting
OpenClaw installed the Wufoo skill but can't call the tools
The ClawHub skill teaches OpenClaw about Wufoo, but the calls run through the ClawLink plugin and your connected account. Make sure Wufoo is connected in the dashboard, then start a fresh chat so OpenClaw reloads the tool catalog. If OpenClaw runs as a persistent gateway, restart it so the new tools register.
Connection succeeds but no tools appear
Reconnect Wufoo from the dashboard, then start a fresh chat if the runtime still has the old tool catalog loaded.
"Tool schema not loaded yet" error when calling Wufoo tools
Wufoo tool schemas load on demand the first time a tool runs and are cached after that, so this error usually clears on its own: wait a few seconds and retry the same request. If every Wufoo call keeps failing with it in a fresh chat, reconnect from the dashboard, and contact support if it still persists — that pattern points to a configuration problem on our side, not something you can fix by reconnecting again.
Wufoo returns 403 or "permission denied" on one action while others work
Two usual causes. The connected account may not have access to the specific workspace, inbox, store, or project in the request — check that first. If access looks right, the agent may have sent a placeholder value (like "YOUR_ID" or an example id from documentation) instead of a real one: ask it to run a list or search tool first, then retry the action with a real id from those results. Most failures at this stage are one of these two, not ClawLink bugs.
API key setup works but results look incomplete
Double-check that the API key for Wufoo has the right scopes or account access. A valid key can still be too limited for some reads or writes.
FAQ
Is there a OpenClaw Wufoo integration?
Yes. ClawLink is the fastest way to connect OpenClaw to Wufoo: link your Wufoo account once in the browser and OpenClaw can call the Wufoo API through 7 ready-made tools — no custom code or token handling.
How do I add Wufoo to OpenClaw with ClawLink?
Paste the setup prompt from this page into OpenClaw. It installs the ClawLink Wufoo skill from ClawHub, then you click Connect in the dashboard to authorize Wufoo. OpenClaw calls the tools from the next message — no config files, and the Wufoo key you paste is stored server-side instead of in your environment.
How long does it take to connect Wufoo to OpenClaw?
About two minutes. Sign in, click Connect next to Wufoo in the dashboard, authenticate, and OpenClaw can use it from the next chat message.
Why use ClawLink instead of wiring Wufoo up myself?
The alternative to ClawLink is usually manual API key setup plus your own token handling, permission troubleshooting, and tool plumbing for OpenClaw. That is fine if you want to build and maintain the integration yourself. Most teams just want Wufoo working from chat.
OpenClaw installed the Wufoo skill but can't call the tools
The ClawHub skill teaches OpenClaw about Wufoo, but the calls run through the ClawLink plugin and your connected account. Make sure Wufoo is connected in the dashboard, then start a fresh chat so OpenClaw reloads the tool catalog. If OpenClaw runs as a persistent gateway, restart it so the new tools register.
Related
GitHub tools
Manage repositories, issues, pull requests, and workflows
Connect PagerDuty
Manage incidents, on-call schedules, and services
Connect SafetyCulture
SafetyCulture (formerly iAuditor) is a workplace operations platform that enables teams to conduct digital inspections, manage audits, track issues, schedule tasks, and maintain compliance through mobile and web applications.