How to connect Dromo to OpenClaw
Connect Dromo to OpenClaw with ClawLink: paste your Dromo key once and 8 tools work from chat. No MCP server to run, nothing stored on your machine.
DromoAPI KEYMCPDromo is an intuitive spreadsheet importer that integrates seamlessly with your product, enabling users to match columns, correct errors, perform complex validations, transform values, and upload perfectly formatted data.. Once connected, OpenClaw can read and act on Dromo from chat — pairing, token refresh, and tool wiring handled for you.
The usual route to Dromo access for OpenClaw is an MCP server you configure and keep running, plus your own OAuth app or API keys. ClawLink gives OpenClaw a more practical Dromo setup: install one ClawHub skill, connect Dromo in the browser, and OpenClaw can call real Dromo actions from any chat surface with no auth, token refresh, or tool wiring to build yourself.
Setup
It takes three steps to connect OpenClaw to Dromo.
1Install the plugin
Paste the setup prompt into OpenClaw, or install from the terminal and ask OpenClaw to pair:
openclaw plugins install clawhub:clawlink-plugin- 2
Connect Dromo
Paste your API key in the dashboard.
- 3
Use it from chat
Ask OpenClaw: "What can you do with Dromo?"
Install by command
The setup prompt above does all of this in one paste. By hand, it is one install command plus a browser approval:
openclaw plugins install clawhub:clawlink-pluginThen ask OpenClaw to set up ClawLink. It starts browser pairing and prints an approval link — open it, approve the device, return to the chat, and say done. Finally, connect Dromo in the ClawLink dashboard — paste your Dromo API key once.
Verify the connection by asking OpenClaw:
Pull the relevant data from Dromo, summarize it in plain English, and point out anything that needs attention.
Using a different agent?
The OpenClaw plugin is one client of ClawLink's MCP server. Claude Code, Cursor, Codex, or any agent that can run a shell command pairs with the same ClawLink account through the CLI:
npx -y @useclawlink/cli loginlogin opens the same browser approval and stores a credential locally. Once Dromo is connected in the dashboard, that agent calls the same 8 Dromo tools over MCP. Full setup for MCP clients and shell agents: connect apps to any AI agent.
Dromo MCP for OpenClaw
Looking for a Dromo MCP server for OpenClaw? ClawLink connects Dromo to OpenClaw and exposes 8 Dromo tools your agent can call over MCP, with hosted auth and nothing to run or maintain yourself. Using Hermes instead? The Hermes Dromo integration works the same way.
What the OpenClaw Dromo integration can do
8 Dromo tools are ready for OpenClaw once the account is connected. The 7 below are the ones people reach for most; your agent can call all 8.
7 of 8 Dromo tools for OpenClaw
| Tool | What it does |
|---|---|
Get import schema dromo_get_import_schema | Retrieve an import schema by ID from Dromo |
List import schemas dromo_list_import_schemas | Retrieve all import schemas configured for your Dromo organization |
List uploads dromo_list_uploads | Retrieves a paginated list of all file uploads stored by Dromo for your organization |
Create headless import dromo_create_headless_import | Create a headless import in Dromo |
Create import schema dromo_create_import_schema | Create a new import schema in Dromo |
Update import schema dromo_update_import_schema | Update an existing import schema in Dromo |
Upload file to headless import dromo_upload_file_to_headless_import | Upload a file to Dromo's headless import system using a presigned S3 URL |
Try it: find the Dromo tool you need
Browse the 7 Dromo tools
Click any tool to see exactly what OpenClaw can do and copy a ready-to-use prompt.
Example prompts
Pull the relevant data from Dromo, summarize it in plain English, and point out anything that needs attention.
List the relevant items in Dromo, group them by priority, and recommend what OpenClaw should do next.
List the relevant items in Dromo, group them by priority, and recommend what OpenClaw should do next.
Create it in Dromo for me, then confirm the important fields before you finish.
ClawLink vs. building it yourself
The alternative to ClawLink is usually manual API key setup plus your own token handling, permission troubleshooting, and tool plumbing for OpenClaw. That is fine if you want to build and maintain the integration yourself. Most teams just want Dromo working from chat.
| Manual | ClawLink | |
|---|---|---|
| Credential handling | Collect, validate, store, and rotate the Dromo API key yourself, then make sure every tool call uses the right account. | Users complete the hosted ClawLink setup once and the connected Dromo account becomes available to the agent without you building credential management. |
| Ongoing maintenance | You own refresh logic, permission debugging, environment config, and every provider-specific edge case for Dromo. | ClawLink handles the repetitive integration plumbing so your team can focus on the workflow instead of the infrastructure. |
| Agent usability | You still need to expose the right Dromo actions to the runtime in a format your agent can reliably use. | 8 tools for Dromo are already exposed through ClawLink, so the agent can read and act from chat immediately. |
ClawLink vs. Composio
Composio also exposes Dromo to AI agents. It is developer infrastructure: Python and TypeScript SDKs, an MCP server, and a catalog past 1,000 apps, aimed at teams shipping agent products. ClawLink is built for OpenClaw users instead. You install the plugin once, connect Dromo in the browser, and the 8 tools above work from chat. There is no SDK and no config file, and the Dromo key you paste at setup is stored server-side rather than kept in your environment. Choosing between them? Read the full Composio alternatives comparison.
Troubleshooting
OpenClaw installed the Dromo skill but can't call the tools
The ClawHub skill teaches OpenClaw about Dromo, but the calls run through the ClawLink plugin and your connected account. Make sure Dromo is connected in the dashboard, then start a fresh chat so OpenClaw reloads the tool catalog. If OpenClaw runs as a persistent gateway, restart it so the new tools register.
Connection succeeds but no tools appear
Reconnect Dromo from the dashboard, then start a fresh chat if the runtime still has the old tool catalog loaded.
"Tool schema not loaded yet" error when calling Dromo tools
Dromo tool schemas load on demand the first time a tool runs and are cached after that, so this error usually clears on its own: wait a few seconds and retry the same request. If every Dromo call keeps failing with it in a fresh chat, reconnect from the dashboard, and contact support if it still persists — that pattern points to a configuration problem on our side, not something you can fix by reconnecting again.
Dromo returns 403 or "permission denied" on one action while others work
Two usual causes. The connected account may not have access to the specific workspace, inbox, store, or project in the request — check that first. If access looks right, the agent may have sent a placeholder value (like "YOUR_ID" or an example id from documentation) instead of a real one: ask it to run a list or search tool first, then retry the action with a real id from those results. Most failures at this stage are one of these two, not ClawLink bugs.
API key setup works but results look incomplete
Double-check that the API key for Dromo has the right scopes or account access. A valid key can still be too limited for some reads or writes.
FAQ
Is there a OpenClaw Dromo integration?
Yes. ClawLink is the fastest way to connect OpenClaw to Dromo: link your Dromo account once in the browser and OpenClaw can call the Dromo API through 8 ready-made tools — no custom code or token handling.
How do I add Dromo to OpenClaw with ClawLink?
Paste the setup prompt from this page into OpenClaw. It installs the ClawLink Dromo skill from ClawHub, then you click Connect in the dashboard to authorize Dromo. OpenClaw calls the tools from the next message — no config files, and the Dromo key you paste is stored server-side instead of in your environment.
How long does it take to connect Dromo to OpenClaw?
About two minutes. Sign in, click Connect next to Dromo in the dashboard, authenticate, and OpenClaw can use it from the next chat message.
Why use ClawLink instead of wiring Dromo up myself?
The alternative to ClawLink is usually manual API key setup plus your own token handling, permission troubleshooting, and tool plumbing for OpenClaw. That is fine if you want to build and maintain the integration yourself. Most teams just want Dromo working from chat.
OpenClaw installed the Dromo skill but can't call the tools
The ClawHub skill teaches OpenClaw about Dromo, but the calls run through the ClawLink plugin and your connected account. Make sure Dromo is connected in the dashboard, then start a fresh chat so OpenClaw reloads the tool catalog. If OpenClaw runs as a persistent gateway, restart it so the new tools register.
Related
GitHub tools
Manage repositories, issues, pull requests, and workflows
Connect PagerDuty
Manage incidents, on-call schedules, and services
Connect SafetyCulture
SafetyCulture (formerly iAuditor) is a workplace operations platform that enables teams to conduct digital inspections, manage audits, track issues, schedule tasks, and maintain compliance through mobile and web applications.