How to connect Paperform to OpenClaw
Connect Paperform to OpenClaw with ClawLink: paste your Paperform key once and 5 tools work from chat. No MCP server to run, nothing stored on your machine.
PaperformAPI KEYMCPPaperform is a flexible online form builder that combines beautiful design with serious digital smarts.. Once connected, OpenClaw can read and act on Paperform from chat — pairing, token refresh, and tool wiring handled for you.
The usual route to Paperform access for OpenClaw is an MCP server you configure and keep running, plus your own OAuth app or API keys. ClawLink gives OpenClaw a more practical Paperform setup: install one ClawHub skill, connect Paperform in the browser, and OpenClaw can call real Paperform actions from any chat surface with no auth, token refresh, or tool wiring to build yourself.
Setup
It takes three steps to connect OpenClaw to Paperform.
1Install the plugin
Paste the setup prompt into OpenClaw, or install from the terminal and ask OpenClaw to pair:
openclaw plugins install clawhub:clawlink-plugin- 2
Connect Paperform
Paste your API key in the dashboard.
- 3
Use it from chat
Ask OpenClaw: "What can you do with Paperform?"
Install by command
The setup prompt above does all of this in one paste. By hand, it is one install command plus a browser approval:
openclaw plugins install clawhub:clawlink-pluginThen ask OpenClaw to set up ClawLink. It starts browser pairing and prints an approval link — open it, approve the device, return to the chat, and say done. Finally, connect Paperform in the ClawLink dashboard — paste your Paperform API key once.
Verify the connection by asking OpenClaw:
Pull the relevant data from Paperform, summarize it in plain English, and point out anything that needs attention.
Using a different agent?
The OpenClaw plugin is one client of ClawLink's MCP server. Claude Code, Cursor, Codex, or any agent that can run a shell command pairs with the same ClawLink account through the CLI:
npx -y @useclawlink/cli loginlogin opens the same browser approval and stores a credential locally. Once Paperform is connected in the dashboard, that agent calls the same 5 Paperform tools over MCP. Full setup for MCP clients and shell agents: connect apps to any AI agent.
Paperform MCP for OpenClaw
Looking for a Paperform MCP server for OpenClaw? ClawLink connects Paperform to OpenClaw and exposes 5 Paperform tools your agent can call over MCP, with hosted auth and nothing to run or maintain yourself. Using Hermes instead? The Hermes Paperform integration works the same way.
What the OpenClaw Paperform integration can do
5 Paperform tools are ready for OpenClaw once the account is connected.
All 5 Paperform tools for OpenClaw
| Tool | What it does |
|---|---|
Get space paperform_get_space | Retrieve a space by ID from Paperform |
Get space forms paperform_get_space_forms | Retrieve forms in a space from Paperform |
List forms paperform_list_forms | List all forms accessible by the authorized user |
List spaces paperform_list_spaces | List all spaces accessible by the authorized user |
List translations paperform_list_translations | List all translations accessible by the authorized user |
Try it: find the Paperform tool you need
Browse the 5 Paperform tools
Click any tool to see exactly what OpenClaw can do and copy a ready-to-use prompt.
Example prompts
Pull the relevant data from Paperform, summarize it in plain English, and point out anything that needs attention.
Pull the relevant data from Paperform, summarize it in plain English, and point out anything that needs attention.
List the relevant items in Paperform, group them by priority, and recommend what OpenClaw should do next.
List the relevant items in Paperform, group them by priority, and recommend what OpenClaw should do next.
ClawLink vs. building it yourself
The alternative to ClawLink is usually manual API key setup plus your own token handling, permission troubleshooting, and tool plumbing for OpenClaw. That is fine if you want to build and maintain the integration yourself. Most teams just want Paperform working from chat.
| Manual | ClawLink | |
|---|---|---|
| Credential handling | Collect, validate, store, and rotate the Paperform API key yourself, then make sure every tool call uses the right account. | Users complete the hosted ClawLink setup once and the connected Paperform account becomes available to the agent without you building credential management. |
| Ongoing maintenance | You own refresh logic, permission debugging, environment config, and every provider-specific edge case for Paperform. | ClawLink handles the repetitive integration plumbing so your team can focus on the workflow instead of the infrastructure. |
| Agent usability | You still need to expose the right Paperform actions to the runtime in a format your agent can reliably use. | 5 tools for Paperform are already exposed through ClawLink, so the agent can read and act from chat immediately. |
ClawLink vs. Composio
Composio also exposes Paperform to AI agents. It is developer infrastructure: Python and TypeScript SDKs, an MCP server, and a catalog past 1,000 apps, aimed at teams shipping agent products. ClawLink is built for OpenClaw users instead. You install the plugin once, connect Paperform in the browser, and the 5 tools above work from chat. There is no SDK and no config file, and the Paperform key you paste at setup is stored server-side rather than kept in your environment. Choosing between them? Read the full Composio alternatives comparison.
Troubleshooting
OpenClaw installed the Paperform skill but can't call the tools
The ClawHub skill teaches OpenClaw about Paperform, but the calls run through the ClawLink plugin and your connected account. Make sure Paperform is connected in the dashboard, then start a fresh chat so OpenClaw reloads the tool catalog. If OpenClaw runs as a persistent gateway, restart it so the new tools register.
Connection succeeds but no tools appear
Reconnect Paperform from the dashboard, then start a fresh chat if the runtime still has the old tool catalog loaded.
"Tool schema not loaded yet" error when calling Paperform tools
Paperform tool schemas load on demand the first time a tool runs and are cached after that, so this error usually clears on its own: wait a few seconds and retry the same request. If every Paperform call keeps failing with it in a fresh chat, reconnect from the dashboard, and contact support if it still persists — that pattern points to a configuration problem on our side, not something you can fix by reconnecting again.
Paperform returns 403 or "permission denied" on one action while others work
Two usual causes. The connected account may not have access to the specific workspace, inbox, store, or project in the request — check that first. If access looks right, the agent may have sent a placeholder value (like "YOUR_ID" or an example id from documentation) instead of a real one: ask it to run a list or search tool first, then retry the action with a real id from those results. Most failures at this stage are one of these two, not ClawLink bugs.
API key setup works but results look incomplete
Double-check that the API key for Paperform has the right scopes or account access. A valid key can still be too limited for some reads or writes.
FAQ
Is there a OpenClaw Paperform integration?
Yes. ClawLink is the fastest way to connect OpenClaw to Paperform: link your Paperform account once in the browser and OpenClaw can call the Paperform API through 5 ready-made tools — no custom code or token handling.
How do I add Paperform to OpenClaw with ClawLink?
Paste the setup prompt from this page into OpenClaw. It installs the ClawLink Paperform skill from ClawHub, then you click Connect in the dashboard to authorize Paperform. OpenClaw calls the tools from the next message — no config files, and the Paperform key you paste is stored server-side instead of in your environment.
How long does it take to connect Paperform to OpenClaw?
About two minutes. Sign in, click Connect next to Paperform in the dashboard, authenticate, and OpenClaw can use it from the next chat message.
Why use ClawLink instead of wiring Paperform up myself?
The alternative to ClawLink is usually manual API key setup plus your own token handling, permission troubleshooting, and tool plumbing for OpenClaw. That is fine if you want to build and maintain the integration yourself. Most teams just want Paperform working from chat.
OpenClaw installed the Paperform skill but can't call the tools
The ClawHub skill teaches OpenClaw about Paperform, but the calls run through the ClawLink plugin and your connected account. Make sure Paperform is connected in the dashboard, then start a fresh chat so OpenClaw reloads the tool catalog. If OpenClaw runs as a persistent gateway, restart it so the new tools register.
Related
OpenClaw GitHub integration
Manage repositories, issues, pull requests, and workflows
OpenClaw PagerDuty integration
Manage incidents, on-call schedules, and services
SafetyCulture tools
SafetyCulture (formerly iAuditor) is a workplace operations platform that enables teams to conduct digital inspections, manage audits, track issues, schedule tasks, and maintain compliance through mobile and web applications.