How to connect Addressfinder to OpenClaw
Connect Addressfinder to OpenClaw with ClawLink: paste your Addressfinder key once and 17 tools work from chat. No MCP server to run, nothing stored on your machine.
AddressfinderAPI KEYMCPA reliably smart, reliably accurate data quality platform for address, email, and phone verification.. Once connected, OpenClaw can read and act on Addressfinder from chat — pairing, token refresh, and tool wiring handled for you.
The usual route to Addressfinder access for OpenClaw is an MCP server you configure and keep running, plus your own OAuth app or API keys. ClawLink gives OpenClaw a more practical Addressfinder setup: install one ClawHub skill, connect Addressfinder in the browser, and OpenClaw can call real Addressfinder actions from any chat surface with no auth, token refresh, or tool wiring to build yourself.
Setup
It takes three steps to connect OpenClaw to Addressfinder.
1Install the plugin
Paste the setup prompt into OpenClaw, or install from the terminal and ask OpenClaw to pair:
openclaw plugins install clawhub:clawlink-plugin- 2
Connect Addressfinder
Paste your API key in the dashboard.
- 3
Use it from chat
Ask OpenClaw: "What can you do with Addressfinder?"
Install by command
The setup prompt above does all of this in one paste. By hand, it is one install command plus a browser approval:
openclaw plugins install clawhub:clawlink-pluginThen ask OpenClaw to set up ClawLink. It starts browser pairing and prints an approval link — open it, approve the device, return to the chat, and say done. Finally, connect Addressfinder in the ClawLink dashboard — paste your Addressfinder API key once.
Verify the connection by asking OpenClaw:
Use Addressfinder to au address autocomplete api and walk me through the result in plain English.
Using a different agent?
The OpenClaw plugin is one client of ClawLink's MCP server. Claude Code, Cursor, Codex, or any agent that can run a shell command pairs with the same ClawLink account through the CLI:
npx -y @useclawlink/cli loginlogin opens the same browser approval and stores a credential locally. Once Addressfinder is connected in the dashboard, that agent calls the same 17 Addressfinder tools over MCP. Full setup for MCP clients and shell agents: connect apps to any AI agent.
Addressfinder MCP for OpenClaw
Looking for a Addressfinder MCP server for OpenClaw? ClawLink connects Addressfinder to OpenClaw and exposes 17 Addressfinder tools your agent can call over MCP, with hosted auth and nothing to run or maintain yourself. Using Hermes instead? The Hermes Addressfinder integration works the same way.
What the OpenClaw Addressfinder integration can do
17 Addressfinder tools are ready for OpenClaw once the account is connected.
All 17 Addressfinder tools for OpenClaw
| Tool | What it does |
|---|---|
Au address autocomplete API addressfinder_au_address_autocomplete_api | Perform interactive search of Australian addresses from the AddressFinder database |
Au address metadata addressfinder_au_address_metadata | Retrieve full metadata for an Australian address selected from the Address Autocomplete API |
Au address verification addressfinder_au_address_verification | Verify Australian addresses against PAF/GNAF databases |
Au location autocomplete API addressfinder_au_location_autocomplete_api | Perform interactive autocomplete search for Australian streets, suburbs, and states |
Au location metadata API addressfinder_au_location_metadata_api | Retrieve comprehensive metadata for an Australian location (street, suburb, or state) selected |
Email verification API addressfinder_email_verification_api | Verify email addresses including syntax validation, domain existence, and email account |
Int address autocomplete API addressfinder_int_address_autocomplete_api | Search for international addresses using autocomplete functionality |
Int address metadata API addressfinder_int_address_metadata_api | Retrieve full metadata for an international address selected from the Address Autocomplete API |
Nz address autocomplete addressfinder_nz_address_autocomplete | Perform interactive search for New Zealand addresses |
Nz address metadata addressfinder_nz_address_metadata | Retrieve full metadata for a NZ address including coordinates, census data, and postal details |
Nz address reverse geocode addressfinder_nz_address_reverse_geocode | Reverse geocode NZ addresses from GPS coordinates |
Nz address verification API addressfinder_nz_address_verification_api | Verify New Zealand addresses against the Addressfinder database |
Nz location autocomplete addressfinder_nz_location_autocomplete | Perform interactive search for New Zealand streets, suburbs, cities, and regions |
Nz location metadata addressfinder_nz_location_metadata | Retrieve full metadata for a New Zealand location selected from the Location Autocomplete API |
Nz poi autocomplete API addressfinder_nz_poi_autocomplete_api | Perform interactive search for points of interest in New Zealand |
Nzpoi metadata API addressfinder_nzpoi_metadata_api | Retrieve comprehensive metadata for New Zealand points of interest including coordinates and |
Phone verification API addressfinder_phone_verification_api | Verify phone numbers through syntax, range checks, and network verification |
Try it: find the Addressfinder tool you need
Browse the 17 Addressfinder tools
Click any tool to see exactly what OpenClaw can do and copy a ready-to-use prompt.
Example prompts
Use Addressfinder to au address autocomplete api and walk me through the result in plain English.
Use Addressfinder to au address metadata and walk me through the result in plain English.
Use Addressfinder to au address verification and walk me through the result in plain English.
Use Addressfinder to au location autocomplete api and walk me through the result in plain English.
ClawLink vs. building it yourself
The alternative to ClawLink is usually manual API key setup plus your own token handling, permission troubleshooting, and tool plumbing for OpenClaw. That is fine if you want to build and maintain the integration yourself. Most teams just want Addressfinder working from chat.
| Manual | ClawLink | |
|---|---|---|
| Credential handling | Collect, validate, store, and rotate the Addressfinder API key yourself, then make sure every tool call uses the right account. | Users complete the hosted ClawLink setup once and the connected Addressfinder account becomes available to the agent without you building credential management. |
| Ongoing maintenance | You own refresh logic, permission debugging, environment config, and every provider-specific edge case for Addressfinder. | ClawLink handles the repetitive integration plumbing so your team can focus on the workflow instead of the infrastructure. |
| Agent usability | You still need to expose the right Addressfinder actions to the runtime in a format your agent can reliably use. | 17 tools for Addressfinder are already exposed through ClawLink, so the agent can read and act from chat immediately. |
ClawLink vs. Composio
Composio also exposes Addressfinder to AI agents. It is developer infrastructure: Python and TypeScript SDKs, an MCP server, and a catalog past 1,000 apps, aimed at teams shipping agent products. ClawLink is built for OpenClaw users instead. You install the plugin once, connect Addressfinder in the browser, and the 17 tools above work from chat. There is no SDK and no config file, and the Addressfinder key you paste at setup is stored server-side rather than kept in your environment. Choosing between them? Read the full Composio alternatives comparison.
Troubleshooting
OpenClaw installed the Addressfinder skill but can't call the tools
The ClawHub skill teaches OpenClaw about Addressfinder, but the calls run through the ClawLink plugin and your connected account. Make sure Addressfinder is connected in the dashboard, then start a fresh chat so OpenClaw reloads the tool catalog. If OpenClaw runs as a persistent gateway, restart it so the new tools register.
Connection succeeds but no tools appear
Reconnect Addressfinder from the dashboard, then start a fresh chat if the runtime still has the old tool catalog loaded.
"Tool schema not loaded yet" error when calling Addressfinder tools
Addressfinder tool schemas load on demand the first time a tool runs and are cached after that, so this error usually clears on its own: wait a few seconds and retry the same request. If every Addressfinder call keeps failing with it in a fresh chat, reconnect from the dashboard, and contact support if it still persists — that pattern points to a configuration problem on our side, not something you can fix by reconnecting again.
Addressfinder returns 403 or "permission denied" on one action while others work
Two usual causes. The connected account may not have access to the specific workspace, inbox, store, or project in the request — check that first. If access looks right, the agent may have sent a placeholder value (like "YOUR_ID" or an example id from documentation) instead of a real one: ask it to run a list or search tool first, then retry the action with a real id from those results. Most failures at this stage are one of these two, not ClawLink bugs.
API key setup works but results look incomplete
Double-check that the API key for Addressfinder has the right scopes or account access. A valid key can still be too limited for some reads or writes.
FAQ
Is there a OpenClaw Addressfinder integration?
Yes. ClawLink is the fastest way to connect OpenClaw to Addressfinder: link your Addressfinder account once in the browser and OpenClaw can call the Addressfinder API through 17 ready-made tools — no custom code or token handling.
How do I add Addressfinder to OpenClaw with ClawLink?
Paste the setup prompt from this page into OpenClaw. It installs the ClawLink Addressfinder skill from ClawHub, then you click Connect in the dashboard to authorize Addressfinder. OpenClaw calls the tools from the next message — no config files, and the Addressfinder key you paste is stored server-side instead of in your environment.
How long does it take to connect Addressfinder to OpenClaw?
About two minutes. Sign in, click Connect next to Addressfinder in the dashboard, authenticate, and OpenClaw can use it from the next chat message.
Why use ClawLink instead of wiring Addressfinder up myself?
The alternative to ClawLink is usually manual API key setup plus your own token handling, permission troubleshooting, and tool plumbing for OpenClaw. That is fine if you want to build and maintain the integration yourself. Most teams just want Addressfinder working from chat.
OpenClaw installed the Addressfinder skill but can't call the tools
The ClawHub skill teaches OpenClaw about Addressfinder, but the calls run through the ClawLink plugin and your connected account. Make sure Addressfinder is connected in the dashboard, then start a fresh chat so OpenClaw reloads the tool catalog. If OpenClaw runs as a persistent gateway, restart it so the new tools register.
Related
GitHub tools
Manage repositories, issues, pull requests, and workflows
Connect PagerDuty
Manage incidents, on-call schedules, and services
SafetyCulture
SafetyCulture (formerly iAuditor) is a workplace operations platform that enables teams to conduct digital inspections, manage audits, track issues, schedule tasks, and maintain compliance through mobile and web applications.