How to connect Flotiq to OpenClaw
Connect Flotiq to OpenClaw with ClawLink: paste your Flotiq key once and 10 tools work from chat. No MCP server to run, nothing stored on your machine.
FlotiqAPI KEYMCPFlotiq is an API-first headless content management system for defining content types, managing and publishing content, searching data, and handling media.. Once connected, OpenClaw can read and act on Flotiq from chat — pairing, token refresh, and tool wiring handled for you.
The usual route to Flotiq access for OpenClaw is an MCP server you configure and keep running, plus your own OAuth app or API keys. ClawLink gives OpenClaw a more practical Flotiq setup: install one ClawHub skill, connect Flotiq in the browser, and OpenClaw can call real Flotiq actions from any chat surface with no auth, token refresh, or tool wiring to build yourself.
Setup
It takes three steps to connect OpenClaw to Flotiq.
1Install the plugin
Paste the setup prompt into OpenClaw, or install from the terminal and ask OpenClaw to pair:
openclaw plugins install clawhub:clawlink-plugin- 2
Connect Flotiq
Paste your API key in the dashboard.
- 3
Use it from chat
Ask OpenClaw: "What can you do with Flotiq?"
Install by command
The setup prompt above does all of this in one paste. By hand, it is one install command plus a browser approval:
openclaw plugins install clawhub:clawlink-pluginThen ask OpenClaw to set up ClawLink. It starts browser pairing and prints an approval link — open it, approve the device, return to the chat, and say done. Finally, connect Flotiq in the ClawLink dashboard — paste your Flotiq API key once.
Verify the connection by asking OpenClaw:
Pull the relevant data from Flotiq, summarize it in plain English, and point out anything that needs attention.
Using a different agent?
The OpenClaw plugin is one client of ClawLink's MCP server. Claude Code, Cursor, Codex, or any agent that can run a shell command pairs with the same ClawLink account through the CLI:
npx -y @useclawlink/cli loginlogin opens the same browser approval and stores a credential locally. Once Flotiq is connected in the dashboard, that agent calls the same 10 Flotiq tools over MCP. Full setup for MCP clients and shell agents: connect apps to any AI agent.
Flotiq MCP for OpenClaw
Looking for a Flotiq MCP server for OpenClaw? ClawLink connects Flotiq to OpenClaw and exposes 10 Flotiq tools your agent can call over MCP, with hosted auth and nothing to run or maintain yourself. Using Hermes instead? The Hermes Flotiq integration works the same way.
What the OpenClaw Flotiq integration can do
10 Flotiq tools are ready for OpenClaw once the account is connected. The 9 below are the ones people reach for most; your agent can call all 10.
9 of 10 Flotiq tools for OpenClaw
| Tool | What it does |
|---|---|
Get content object flotiq_get_content_object | Get one object by content type and ID, optionally expanding its relationships |
Get content type flotiq_get_content_type | Get one content type definition, including its field schema and metadata configuration |
List content objects flotiq_list_content_objects | List and filter objects from one Flotiq content type while preserving its dynamic fields |
List content types flotiq_list_content_types | List the content type definitions visible to the connected Flotiq account, including internal |
Search content flotiq_search_content | Full-text search across content objects visible to the API key, optionally restricted to |
Batch upsert content objects flotiq_batch_upsert_content_objects | Create or update up to 100 objects of one Flotiq content type in a batch, returning success and |
Create content object flotiq_create_content_object | Create one object that conforms to a Flotiq content type definition |
Set content object publication flotiq_set_content_object_publication | Publish a Draft & Public content object or return it to draft; this changes what public |
Update content object flotiq_update_content_object | Partially update selected fields of one existing Flotiq content object |
Try it: find the Flotiq tool you need
Browse the 9 Flotiq tools
Click any tool to see exactly what OpenClaw can do and copy a ready-to-use prompt.
Example prompts
Pull the relevant data from Flotiq, summarize it in plain English, and point out anything that needs attention.
Pull the relevant data from Flotiq, summarize it in plain English, and point out anything that needs attention.
List the relevant items in Flotiq, group them by priority, and recommend what OpenClaw should do next.
List the relevant items in Flotiq, group them by priority, and recommend what OpenClaw should do next.
ClawLink vs. building it yourself
The alternative to ClawLink is usually manual API key setup plus your own token handling, permission troubleshooting, and tool plumbing for OpenClaw. That is fine if you want to build and maintain the integration yourself. Most teams just want Flotiq working from chat.
| Manual | ClawLink | |
|---|---|---|
| Credential handling | Collect, validate, store, and rotate the Flotiq API key yourself, then make sure every tool call uses the right account. | Users complete the hosted ClawLink setup once and the connected Flotiq account becomes available to the agent without you building credential management. |
| Ongoing maintenance | You own refresh logic, permission debugging, environment config, and every provider-specific edge case for Flotiq. | ClawLink handles the repetitive integration plumbing so your team can focus on the workflow instead of the infrastructure. |
| Agent usability | You still need to expose the right Flotiq actions to the runtime in a format your agent can reliably use. | 10 tools for Flotiq are already exposed through ClawLink, so the agent can read and act from chat immediately. |
ClawLink vs. Composio
Composio also exposes Flotiq to AI agents. It is developer infrastructure: Python and TypeScript SDKs, an MCP server, and a catalog past 1,000 apps, aimed at teams shipping agent products. ClawLink is built for OpenClaw users instead. You install the plugin once, connect Flotiq in the browser, and the 10 tools above work from chat. There is no SDK and no config file, and the Flotiq key you paste at setup is stored server-side rather than kept in your environment. Choosing between them? Read the full Composio alternatives comparison.
Troubleshooting
OpenClaw installed the Flotiq skill but can't call the tools
The ClawHub skill teaches OpenClaw about Flotiq, but the calls run through the ClawLink plugin and your connected account. Make sure Flotiq is connected in the dashboard, then start a fresh chat so OpenClaw reloads the tool catalog. If OpenClaw runs as a persistent gateway, restart it so the new tools register.
Connection succeeds but no tools appear
Reconnect Flotiq from the dashboard, then start a fresh chat if the runtime still has the old tool catalog loaded.
"Tool schema not loaded yet" error when calling Flotiq tools
Flotiq tool schemas load on demand the first time a tool runs and are cached after that, so this error usually clears on its own: wait a few seconds and retry the same request. If every Flotiq call keeps failing with it in a fresh chat, reconnect from the dashboard, and contact support if it still persists — that pattern points to a configuration problem on our side, not something you can fix by reconnecting again.
Flotiq returns 403 or "permission denied" on one action while others work
Two usual causes. The connected account may not have access to the specific workspace, inbox, store, or project in the request — check that first. If access looks right, the agent may have sent a placeholder value (like "YOUR_ID" or an example id from documentation) instead of a real one: ask it to run a list or search tool first, then retry the action with a real id from those results. Most failures at this stage are one of these two, not ClawLink bugs.
API key setup works but results look incomplete
Double-check that the API key for Flotiq has the right scopes or account access. A valid key can still be too limited for some reads or writes.
FAQ
Is there a OpenClaw Flotiq integration?
Yes. ClawLink is the fastest way to connect OpenClaw to Flotiq: link your Flotiq account once in the browser and OpenClaw can call the Flotiq API through 10 ready-made tools — no custom code or token handling.
How do I add Flotiq to OpenClaw with ClawLink?
Paste the setup prompt from this page into OpenClaw. It installs the ClawLink Flotiq skill from ClawHub, then you click Connect in the dashboard to authorize Flotiq. OpenClaw calls the tools from the next message — no config files, and the Flotiq key you paste is stored server-side instead of in your environment.
How long does it take to connect Flotiq to OpenClaw?
About two minutes. Sign in, click Connect next to Flotiq in the dashboard, authenticate, and OpenClaw can use it from the next chat message.
Why use ClawLink instead of wiring Flotiq up myself?
The alternative to ClawLink is usually manual API key setup plus your own token handling, permission troubleshooting, and tool plumbing for OpenClaw. That is fine if you want to build and maintain the integration yourself. Most teams just want Flotiq working from chat.
OpenClaw installed the Flotiq skill but can't call the tools
The ClawHub skill teaches OpenClaw about Flotiq, but the calls run through the ClawLink plugin and your connected account. Make sure Flotiq is connected in the dashboard, then start a fresh chat so OpenClaw reloads the tool catalog. If OpenClaw runs as a persistent gateway, restart it so the new tools register.
Related
OpenClaw GitHub integration
Manage repositories, issues, pull requests, and workflows
PagerDuty tools
Manage incidents, on-call schedules, and services
OpenClaw SafetyCulture integration
SafetyCulture (formerly iAuditor) is a workplace operations platform that enables teams to conduct digital inspections, manage audits, track issues, schedule tasks, and maintain compliance through mobile and web applications.