How to connect ScreenshotOne to OpenClaw
Connect ScreenshotOne to OpenClaw with ClawLink: paste your ScreenshotOne key once and 5 tools work from chat. No MCP server to run, nothing stored on your machine.
ScreenshotOneAPI KEYMCPScreenshotOne is a screenshot API for developers, enabling the rendering of website screenshots through simple API calls without managing browser clusters.. Once connected, OpenClaw can read and act on ScreenshotOne from chat — pairing, token refresh, and tool wiring handled for you.
The usual route to ScreenshotOne access for OpenClaw is an MCP server you configure and keep running, plus your own OAuth app or API keys. ClawLink gives OpenClaw a more practical ScreenshotOne setup: install one ClawHub skill, connect ScreenshotOne in the browser, and OpenClaw can call real ScreenshotOne actions from any chat surface with no auth, token refresh, or tool wiring to build yourself.
Setup
It takes three steps to connect OpenClaw to ScreenshotOne.
1Install the plugin
Paste the setup prompt into OpenClaw, or install from the terminal and ask OpenClaw to pair:
openclaw plugins install clawhub:clawlink-plugin- 2
Connect ScreenshotOne
Paste your API key in the dashboard.
- 3
Use it from chat
Ask OpenClaw: "What can you do with ScreenshotOne?"
Install by command
The setup prompt above does all of this in one paste. By hand, it is one install command plus a browser approval:
openclaw plugins install clawhub:clawlink-pluginThen ask OpenClaw to set up ClawLink. It starts browser pairing and prints an approval link — open it, approve the device, return to the chat, and say done. Finally, connect ScreenshotOne in the ClawLink dashboard — paste your ScreenshotOne API key once.
Verify the connection by asking OpenClaw:
Pull the relevant data from ScreenshotOne, summarize it in plain English, and point out anything that needs attention.
Using a different agent?
The OpenClaw plugin is one client of ClawLink's MCP server. Claude Code, Cursor, Codex, or any agent that can run a shell command pairs with the same ClawLink account through the CLI:
npx -y @useclawlink/cli loginlogin opens the same browser approval and stores a credential locally. Once ScreenshotOne is connected in the dashboard, that agent calls the same 5 ScreenshotOne tools over MCP. Full setup for MCP clients and shell agents: connect apps to any AI agent.
ScreenshotOne MCP for OpenClaw
Looking for a ScreenshotOne MCP server for OpenClaw? ClawLink connects ScreenshotOne to OpenClaw and exposes 5 ScreenshotOne tools your agent can call over MCP, with hosted auth and nothing to run or maintain yourself. Using Hermes instead? The Hermes ScreenshotOne integration works the same way.
What the OpenClaw ScreenshotOne integration can do
5 ScreenshotOne tools are ready for OpenClaw once the account is connected.
All 5 ScreenshotOne tools for OpenClaw
| Tool | What it does |
|---|---|
Get usage screenshotone_get_usage | Retrieve current API plan usage information |
List devices screenshotone_list_devices | Retrieve the list of supported devices for viewport emulation |
Take animated screenshot screenshotone_take_animated_screenshot | Captures an animated screenshot (video or GIF) of a given website URL |
Take screenshot screenshotone_take_screenshot | Generate a screenshot or PDF of a website, render HTML, or Markdown using POST request |
Take bulk screenshots screenshotone_take_bulk_screenshots | Take multiple screenshots in a single request with shared defaults and individual overrides |
Try it: find the ScreenshotOne tool you need
Browse the 5 ScreenshotOne tools
Click any tool to see exactly what OpenClaw can do and copy a ready-to-use prompt.
Example prompts
Pull the relevant data from ScreenshotOne, summarize it in plain English, and point out anything that needs attention.
List the relevant items in ScreenshotOne, group them by priority, and recommend what OpenClaw should do next.
Use ScreenshotOne to take animated screenshot and walk me through the result in plain English.
Use ScreenshotOne to take screenshot and walk me through the result in plain English.
ClawLink vs. building it yourself
The alternative to ClawLink is usually manual API key setup plus your own token handling, permission troubleshooting, and tool plumbing for OpenClaw. That is fine if you want to build and maintain the integration yourself. Most teams just want ScreenshotOne working from chat.
| Manual | ClawLink | |
|---|---|---|
| Credential handling | Collect, validate, store, and rotate the ScreenshotOne API key yourself, then make sure every tool call uses the right account. | Users complete the hosted ClawLink setup once and the connected ScreenshotOne account becomes available to the agent without you building credential management. |
| Ongoing maintenance | You own refresh logic, permission debugging, environment config, and every provider-specific edge case for ScreenshotOne. | ClawLink handles the repetitive integration plumbing so your team can focus on the workflow instead of the infrastructure. |
| Agent usability | You still need to expose the right ScreenshotOne actions to the runtime in a format your agent can reliably use. | 5 tools for ScreenshotOne are already exposed through ClawLink, so the agent can read and act from chat immediately. |
ClawLink vs. Composio
Composio also exposes ScreenshotOne to AI agents. It is developer infrastructure: Python and TypeScript SDKs, an MCP server, and a catalog past 1,000 apps, aimed at teams shipping agent products. ClawLink is built for OpenClaw users instead. You install the plugin once, connect ScreenshotOne in the browser, and the 5 tools above work from chat. There is no SDK and no config file, and the ScreenshotOne key you paste at setup is stored server-side rather than kept in your environment. Choosing between them? Read the full Composio alternatives comparison.
Troubleshooting
OpenClaw installed the ScreenshotOne skill but can't call the tools
The ClawHub skill teaches OpenClaw about ScreenshotOne, but the calls run through the ClawLink plugin and your connected account. Make sure ScreenshotOne is connected in the dashboard, then start a fresh chat so OpenClaw reloads the tool catalog. If OpenClaw runs as a persistent gateway, restart it so the new tools register.
Connection succeeds but no tools appear
Reconnect ScreenshotOne from the dashboard, then start a fresh chat if the runtime still has the old tool catalog loaded.
"Tool schema not loaded yet" error when calling ScreenshotOne tools
ScreenshotOne tool schemas load on demand the first time a tool runs and are cached after that, so this error usually clears on its own: wait a few seconds and retry the same request. If every ScreenshotOne call keeps failing with it in a fresh chat, reconnect from the dashboard, and contact support if it still persists — that pattern points to a configuration problem on our side, not something you can fix by reconnecting again.
ScreenshotOne returns 403 or "permission denied" on one action while others work
Two usual causes. The connected account may not have access to the specific workspace, inbox, store, or project in the request — check that first. If access looks right, the agent may have sent a placeholder value (like "YOUR_ID" or an example id from documentation) instead of a real one: ask it to run a list or search tool first, then retry the action with a real id from those results. Most failures at this stage are one of these two, not ClawLink bugs.
API key setup works but results look incomplete
Double-check that the API key for ScreenshotOne has the right scopes or account access. A valid key can still be too limited for some reads or writes.
FAQ
Is there a OpenClaw ScreenshotOne integration?
Yes. ClawLink is the fastest way to connect OpenClaw to ScreenshotOne: link your ScreenshotOne account once in the browser and OpenClaw can call the ScreenshotOne API through 5 ready-made tools — no custom code or token handling.
How do I add ScreenshotOne to OpenClaw with ClawLink?
Paste the setup prompt from this page into OpenClaw. It installs the ClawLink ScreenshotOne skill from ClawHub, then you click Connect in the dashboard to authorize ScreenshotOne. OpenClaw calls the tools from the next message — no config files, and the ScreenshotOne key you paste is stored server-side instead of in your environment.
How long does it take to connect ScreenshotOne to OpenClaw?
About two minutes. Sign in, click Connect next to ScreenshotOne in the dashboard, authenticate, and OpenClaw can use it from the next chat message.
Why use ClawLink instead of wiring ScreenshotOne up myself?
The alternative to ClawLink is usually manual API key setup plus your own token handling, permission troubleshooting, and tool plumbing for OpenClaw. That is fine if you want to build and maintain the integration yourself. Most teams just want ScreenshotOne working from chat.
OpenClaw installed the ScreenshotOne skill but can't call the tools
The ClawHub skill teaches OpenClaw about ScreenshotOne, but the calls run through the ClawLink plugin and your connected account. Make sure ScreenshotOne is connected in the dashboard, then start a fresh chat so OpenClaw reloads the tool catalog. If OpenClaw runs as a persistent gateway, restart it so the new tools register.
Related
OpenClaw GitHub integration
Manage repositories, issues, pull requests, and workflows
Connect PagerDuty
Manage incidents, on-call schedules, and services
SafetyCulture
SafetyCulture (formerly iAuditor) is a workplace operations platform that enables teams to conduct digital inspections, manage audits, track issues, schedule tasks, and maintain compliance through mobile and web applications.